Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
MIDI Message Flow (THRU OFF) MIDI Message Flow (THRU ON) Appendices About Standard Driver Mode Use this mode when using the standard MIDI driver provided with the operating system. * Standard driver mode supports only Windows XP SP2 or later, and Mac OS X. If you are using Windows 98/Me/2000/XP or XP SP1, or if you are using Mac OS 9, you must turn the ADVANCED (mode select) Switch ON before you connect the UM-1EX to your computer. Installation of the standard driver 1. With the UM-1EX left unconnected, start up your computer. * Disconnect all USB cables other than those for your keyboard and mouse, and restart your Macintosh. 2. Exit all currently running software (applications). 3. Set the UM-1EX’s ADVANCE DRIVER switch (mode switch) to OFF. 4. Connect the UM-1EX to the computer. The driver is automatically installed. * This unit is equipped with a protection circuit. A brief interval (a few seconds) after connecting the UM1EX is required before the unit will operate normally. Standard driver settings These settings enable use of the UM-1EX with sequencer software that uses Windows or Macintosh standard device settings. If using sequencer software that does not utilize Windows standard device settings, make the device settings within the sequencer software. For instructions on the device settings for your particular sequencer software, refer to the owner’s manual that was supplied with it. When using Windows XP 1. In accordance with Steps 1 in “Windows XP users” (p. 18), open the Audio tab in the Sounds and Audio Devices Properties dialog box. 2. Click the Ў for [Default device] in the MIDI music playback menu and select the USB audio device from the list that appears. Depending on your computing environment, “(2)” or some other number may be added at the end of the port name. When using Macintosh (Mac OS X) The procedure is the same as for Advanced mode. Refer to “Setting the driver” (p. 23). Troubleshooting If you experience problems, read this chapter first. It contains tips for solving most problems. * For details on operating your Windows or Macintosh computer, refer to the owner’s manual of the computer and operating system you are using. Problems Related to the USB Driver Cannot install the driver correctly Install the UM-1 driver once again as described in Getting Connected and Installing Drivers (Windows) (p. 11) or Getting Connected and Installing Drivers (Macintosh) (p. 21). Is the UM-1EX connected correctly? Make sure that the USB connector of your computer is connected to the UM-1EX. Could any other USB device be connected? Before you install, disconnect all USB devices except for your mouse and keyboard. Could other software or resident software (such as antivirus programs) be running? Installation may not be successful if other programs are running. Be sure to close all other programs before installation. Is the CD-ROM correctly inserted into your CD-ROM drive? Installation is not possible unless the CD-ROM included with the UM-1EX is inserted in your CDROM drive. Make sure that the CD-ROM is correctly inserted into your CD-ROM drive. Are you attempting to install from a networked CD-ROM drive? You cannot install from a networked CD-ROM drive. Is the CD-ROM or the lens of the CD-ROM drive be dirty? If the CD-ROM or the lens of the CD-ROM drive is dirty, the installer may not work correctly. Clean the disc and/or lens using a commercially-available CD cleaner or lens cleaner. Is your computer’s power-conservation mode turned off? If power-conservation settings are enabled on your computer, please disable any such settings. For the procedure, refer to the owner’s manual of your computer. Is there sufficient free space on your hard disk? Delete unneeded files to increase the amount of free space. After deleting the unneeded files, empty the recycling bin. Could the UM-1EX’s ADVANCED (mode select) Switch be OFF? Turn the UM-1EX’s ADVANCED (mode select) Switch ON, restart Windows, and re-install the driver. Does your computer or USB hub have sufficient power supply capacity? The UM-1EX cannot be connected if insufficient power is supplied to it. Check whether one of the following cases apply. • If you are using the UM-1EX with a notebook computer that is running on its battery, operation may be unreliable with some models of computer. If this is the case, connect the AC adaptor to your notebook computer. • The power conservation mode of your computer may limit the power that is supplied to USB. Check the settings of your computer. • In some cases, the UM-1EX cannot be used with a bus-powered hub (a hub that does not contain a power supply). Please use a self-powered hub (a hub that contains a power supply). Is USB enabled on your computer? Refer to the operation manual for your computer, and make sure that USB is enabled. Does your computer meet the USB specifications? If you are using a computer that does not fulfill the electrical requirements of the USB specifications, operation may be unstab...