Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
13, 2000 Version: 1.00 1. Receive data Channel Voice Messages * Not received when the Part parameter Rx Channel is set to OFF. Note off Status 2nd byte 3rd byte 8nH kkH vvH 9nH kkH 00H n = MIDI channel number: 0H - FH (ch.1 - ch.16) kk = note number: 00H - 7CH (0 - 124) vv = note off velocity: 00H - 7FH (0 - 127) * The velocity values of Note Off messages are ignored. Note on Status 2nd byte 3rd byte 9nH kkH vvH n = MIDI channel number: 0H - FH (ch.1 - ch.16) kk = note number: 00H - 7CH (0 - 124) vv = note on velocity: 01H - 7FH (1 - 127) Control Change .Bank Select (Controller number 0, 32) Status 2nd byte 3rd byte BnH 00H mmH BnH 20H llH n = MIDI channel number: 0H - FH (ch.1 - ch.16) mm, ll = Bank number: 00H 00H - 7FH 7FH (bank.1 - bank.16384) * Bank Select is not received when “GM1 System On” is received. If “GM System Off” is received, then reception of Bank Select is enabled. * Bank Select processing will be suspended until a Program Change message is received. * The Tones and Drum Sets corresponding to each Bank Select are as follows. Tone +—————————————————————————————————————————————————————————————————————————+ | BANK SELECT BANK SELECT PROGRAM TONE TONE | | MSB LSB NUMBER GROUP NUMBER | |=========================================================================| | 000 - 032 000 001 - 128 Preset(GM) 257 - 512 | | 064 000 001 - 128 User 001 - 128 | | 065 000 001 - 128 Preset 001 - 128 | | 066 000 001 - 128 Preset 129 - 256 | | 121 000 - 009 001 - 128 Preset(GM) 257 - 512 | +—————————————————————————————————————————————————————————————————————————+ Drum Set +—————————————————————————————————————————————————————————————————————————+ | BANK SELECT BANK SELECT PROGRAM DRUMSET DRUMSET | | MSB LSB NUMBER GROUP NUMBER | |=========================================================================| | 000 000 001 - 057 Preset(GM) 012 - 020 | | 064 000 001 - 002 User 001 - 002 | | 065 000 001 - 011 Preset 001 - 011 | | 120 000 001 - 057 Preset(GM) 012 - 020 | +—————————————————————————————————————————————————————————————————————————+ .Modulation (Controller number 1) Status 2nd byte 3rd byte BnH 01H vvH n = MIDI channel number: 0H - FH (ch.1 - ch.16) vv = Modulation depth: 00H - 7FH (0 - 127) .Portamento Time (Controller number 5) Status 2nd byte 3rd byte BnH 05H vvH n = MIDI channel number: 0H - FH (ch.1 - ch.16) vv = Portamento Time: 00H - 7FH (0 - 127) * This adjusts the rate of pitch change when Portamento is ON or when using the Portamento Control.When Portamento Time is 0, portamento will be OFF. * Portamento Time, a Part parameter, is modified. .Data Entry (Controller number 6, 38) Status 2nd byte 3rd byte BnH 06H mmH BnH 26H llH n = MIDI channel number: 0H - FH (ch.1 - ch.16) mm, ll = the value of the parameter specified by RPN/NRPN mm = MSB, ll = LSB .Volume (Controller number 7) Status 2nd byte 3rd byte BnH 07H vvH n = MIDI channel number: 0H - FH (ch.1 - ch.16) vv = Volume: 00H - 7FH (0 - 127) * Volume messages are used to adjust the volume balance of each Part. * Level, a Part parameter, is modified. .Pan (Controller number 10) Status 2nd byte 3rd byte BnH 0AH vvH n = MIDI channel number: 0H - FH (ch.1 - ch.16) vv = pan: 00H - 40H - 7FH (Left - Center - Right) * Pan, a Part parameter, is modified. * For Drum Parts, this is a relative adjustment of each Instrument's pan setting. .Expression (Controller number 11) Status 2nd byte 3rd byte BnH 0BH vvH n = MIDI channel number: 0H - FH (ch.1 - ch.16) vv = Expression: 00H - 7FH (0 - 127) * It can be used independently from Volume messages. Expression messages are used for musical expression within a performance; e.g., expression pedal movements, crescendo and decrescendo. .Effect Control 1 (Controller number 12) Status 2nd byte 3rd byte BnH 0CH vvH n = MIDI channel number: 0H - FH (ch.1 - ch.16) vv = Control value: 00H - 7FH (0 - 127) .Effect Control 2 (Controller number 13) Status 2nd byte 3rd byte BnH 0DH vvH n = MIDI channel number: 0H - FH (ch.1 - ch.16) vv = Control value: 00H - 7FH (0 - 127) .Hold 1 (Controller number 64) Status 2nd byte 3rd byte BnH 40H vvH n = MIDI channel number: 0H - FH (ch.1 - ch.16) vv = Control value: 00H - 7FH (0 - 127) 0-63 = OFF, 64-127 = ON .Portamento (Controller number 65) Status 2nd byte 3rd byte BnH 41H vvH n = MIDI channel number: 0H - FH (ch.1 - ch.16) vv = Control value: 00H - 7FH (0 - 127) 0-63 = OFF, 64-127 = ON * Portamento Switch, a Part parameter, is modified. .Sostenuto (Controller number 66) Status 2nd byte 3rd byte BnH 42H vvH n = MIDI channel number: 0H - FH (ch.1 - ch.16) vv = Control value: 00H - 7FH (0 - 127) 0-63 = OFF, 64-127 = ON .Soft (Controller number 67) Status 2nd byte 3rd byte BnH 43H vvH n = MIDI channel number: 0H - FH (ch.1 - ch.16) vv = Control value: 00H - 7FH (0 - 127) 0-63 = OFF, 64-127 = ON MIDI Implementation .Resonance (Controller number 71) Status 2nd byte 3rd byte BnH 47H vvH n = MIDI channel number: 0H - FH (ch.1 - ch.16) vv = Resonance value (relative change): 00H - 40H - 7FH (-64...
Эта инструкция также подходит к моделям:Музыкальные инструменты - RS-9 (3.88 mb)