Оценок - , средний балл:
(
)
)
Производитель: Roland
Размер: 4.41 mb
Название файла:
Язык инструкции:
Документ загружается, подождите пожалуйста
 |
Документ загружается, подождите пожалуйста
Фрагмент инструкции
Note on Status 2nd byte 3rd byte 9nH kkH vvH n=MIDI channel : 1H-3H, 9H (ch. 2, 3, 4, 10) kk=Note number : 00H-7FH (0-127) vv=Velocity : 01H-7FH (1-127) Control Change . Modulation Status 2nd byte 3rd byte BnH 01H vvH n=MIDI channel : 1H-3H, 9H (ch. 2, 3, 4, 10) vv=Modulation depth : 00H-7FH (0-127) . DATA Entry MSB Status 2nd byte 3rd byte BnH 06H vvH n=MIDI channel : 1H-3H, 9H (ch. 2, 3, 4, 10) vv=MSB Value for RPN: 00H-7FH (0-127) . DATA Entry LSB Status 2nd byte 3rd byte BnH 26H vvH n=MIDI channel : 1H-3H, 9H (ch. 2, 3, 4, 10) vv=LSB Value for RPN: 00H-7FH (0-127) .Volume Status 2nd byte 3rd byte BnH 07H vvH n=MIDI channel : 1H-3H, 9H (ch. 2, 3, 4, 10) vv=Volume : 00H-7FH (0-127) . Pan Status 2nd byte 3rd byte BnH 0AH vvH n=MIDI channel : 1H-3H, 9H (ch. 2, 3, 4, 10) vv=Pan : 00H-7FH (0-127) . Expression Status 2nd byte 3rd byte BnH 0BH vvH n=MIDI channel : 1H-3H, 9H (ch. 2, 3, 4, 10) vv=Expression : 00H-7FH (0-127) Anhang 147 MIDI-Implementation . Hold 1 Status 2nd byte 3rd byte BnH 040H vvH n=MIDI channel : 1H-3H, 9H (ch. 2, 3, 4, 10) vv=Control value : 00H-7FH (0-127) 0-63=OFF 64-127=ON . Effect1 (Reverb Level / Delay Feedback) Status 2nd byte 3rd byte BnH 5BH vvH n=MIDI channel : 1H-3H, 9H (ch. 2, 3, 4, 10) vv=Control value : 00H-7FH (0-127) * This message determines the level of Reverb when the selected Effect is Reverb, or delay level when the selected effect is Delay. * @101 . Effect3 (Chorus Level) Status 2nd byte 3rd byte BnH 5DH vvH n=MIDI channel : 1H-3H, 9H (ch. 2, 3, 4, 10) vv=Control value : 00H-7FH (0-127) * Flanger effect is not obtained if the Flanger send level of each instrument in the Drum kit is not set at high. * For some instruments within the drum kit, the reverb/delay effect may not apply. . RPN MSB/LSB Status 2nd byte 3rd byte BnH 65H mmH BnH 64H llH n=MIDI channel : 1H-3H, 9H (ch. 2, 3, 4, 10) mm=MSB of parameter specified by RPN ll=LSB of parameter specified by RPN **RPN** Control Changes include RPN (Registered Parameter Numbers), which are extended parameters whose function is defined in the MIDI specification. RPN can be used to change instrument parameters. When using RPNs, first the RPN (Controller numbers 100 and 101; they can be sent in any order) is transmitted to specify the parameter you wish to control. Then, Data Entry messages (Controller numbers 6 and 38) are used to set the value of the specified parameter. Once a RPN parameter has been specified, all further Data Entry messages on that channel are considered to apply to that specified parameter. In order to prevent accidents, when the desired setting has been made for the parameter, it is recommended that RPN be set to Null. RPN Data Entry MSB LSB MSB LSB 00H 00H mmH --Pitch Bend Sensitivity mm: 00H-18H (0-24 semitones) Up to 2 octaves, default settings 2 semitones. This setting becomes effective for subsequent Pitch Bend messages. 00H 01H mmH llH Master Fine Tuning mm, ll: 00H, 00H-40H, 00H-7FH, 7FH (-8192 x 100/8192 - 0 - +8192 x 100/8192 cent) 00H 02H mmH --Coarse Tuning mm: 10H-40H-70H (-48 - 0 - +48 semitones) 7FH 7FH ----RPN reset No specified parameter is assigned to RPN and NRPN. Current value is not affected. Program Change Status 2nd byte CnH ppH n=MIDI channel : 1H-3H, 9H (ch. 2, 3, 4, 10) pp=Program number : 00H-7FH (prog.1-prog.128) * The first Note On after receiving a Program change sounds a voice with a new tone with exception of the voices which have been sounded before the Program change is received. Pitch Bend Change Status 2nd byte 3rd byte EnH llH mmH n=MIDI channel : 1H-3H, 9H (ch. 2, 3, 4, 10) mm, ll=Pitch bend value : 00H, 00H-40H, 40H-7FH, 7FH (-8192 - 0 - +8191) Channel Mode Message All Sound Off Status 2nd byte 3rd byte BnH 78H 00H n=MIDI channel : 1H-3H, 9H (ch. 2, 3, 4, 10) * All current active voice in the specified channel will be shut off. Reset All Controllers Status 2nd byte 3rd byte BnH 79H 00H n=MIDI channel : 1H-3H, 9H (ch. 2, 3, 4, 10) * The following control values on the specified channel return to the default value. Controller Default Value Modulation 0 (min) Volume 123 (max) Panpot 64 (center) Expression 127 (max) Hold1 0 (off) RPN/NRPN No specified parameter / No change in value Pitch Bend Change 0 All Note Off Status 2nd byte 3rd byte BnH 7BH 00H n=MIDI channel : 1H-3H, 9H (ch. 2, 3, 4, 10) * All active voices on the specified channel are turned off. (Each voice responds as to a Note Off.) If Hold1 is ON, this message does not become effective until Hold is OFF. Drum track ignores this message. System Exclusive Message Status Data byte Status F0H iiH, ddH, ..., eeH F7H F0H : System Exclusive ii=ID number : 41=Roland 7E=Universal Non-Realtime Message dd, ..., ee=Data: 00H-7FH (0-127) F7H : EOX (End Of Exclusive) * With the JS-5, the System Exclusive Messages can be used to transmit Bulk Dump of Song/Style data and System data. For details refer to p. 134. System Common Message Recognized only when the JS-5 is in stop and MIDI Sync mode is set at MIDI. Song P...