Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Upgrading via USB Use a USB cable to connect the D32XD/D16XD to your computer, and copy the system files to the D32XD [*D16XD] folder of the PC drive. 2. Upgrading the system (1) Access the SYSTEM, “DiskUtility” tab page. (2) Specify the loading source for the system file. Press the Load System button to display the Load System dialog box. Press either the “CD” or “PC” radio button to specify the loading source. (3) Press the Yes button to begin the update. If an unexpected accident such as power failure occurs while updating the system, the D32XD/D16XD may become incapable of normal operation. In such cases, please contact Korg (4) When the upgrade is finished, the D32XD/D16XD will automatically restart using the new system. If the upgrade fails, the D32XD/D16XD will display an message and will not restart. Note the contents of the message (>p.170 “Various messages”). If the LCD screen does not respond as you expect, or if pressing the LCD screen selects a button or cell at a different location, you can perform this procedure to re-align the LCD screen with the touch panel. (1) In the SYSTEM, “Control” tab page, press the Calibration button. The Touch Panel Calibration dialog box will appear. (2) (3) (4) (2) Press the square in the upper left of the LCD. When your touch has been detected correctly the square will be highlighted. (3) Press the square in the lower right of the LCD. When your touch has been detected correctly the square will be highlighted. (4) Press the Done button. If your touch was not detected correctly, an error message will appear. Please perform the procedure once again. Touch PanelCalibration Upgradingthe system MIDI USB DriveDataCDRecorderRhythmEffectsMixerSong,Locate Operation distributor. 95 Reference Counter Counter display Press the counter button, and select the desired counter display method in the Time Disp Type dialog box. 1 4 2 3 1. Song display Displays the song drive name, song name, sampling frequency, and bit depth. 2. Information display Displays date, remaining recordable time, scene, mark, and tempo map data. 3. Counter button Press this to display the Time Disp Type dialog box. 4. Counter display Displays the current recorder location and measure. Time Disp Type dialog box 1 2 2. Information display radio buttons These select the information that will be shown in the information display. Date Time: Calendar display, showing the current year/month/ date and time (hours and minutes). Free Time: Displays the amount of recording time available on the currently selected drive. From the left, this indicates hours, minutes, and seconds. Scene: Displays the currently-used scene name and scene location. Mark: Displays the currently-used mark name and mark location. TempoMap: Displays the currently-used rhythm. 1. Location radio buttons These select the format and type of units used in the counter display. Time display ____:____:___.___ (HMSm) The current location is shown as absolute time from the beginning of the song. From the left, this shows Hours: Minutes: Seconds. milliseconds (1/1000 seconds). * Maximum value is 23:59:59.999 Frame display ___:___.___.__F (HMSF) The current location is shown as absolute time and frames from the beginning of the song. From the left, this shows Hours: Minutes: Seconds. Frames (the “Frame Rate” setting of p.132). * Maximum value is 23:59:59.29F (when using 30 frames/second) Measure display __:__.__ (MBT) The current location is shown as the number of measures from the beginning of the song. From the left, this shows Measures:Beats.Ticks (1/96th beat) * Maximum value is 99999:03.095 (for a 4/4 time signature) Rename Editing a name When the Rename button is displayed in a parameter setting tab page (such as Song, Track, Effect, Scene), you can press the button to edit the corresponding name. Alternatively, you can choose an appropriate name from the name library and then edit it. Highlight the name you want to edit, and press the Rename button. The Rename dialog box will appear, allowing you to edit the name. You can input a name of up to sixteen characters. Certain limitations apply to the backup or export filename (>p.174). Moves the highlighted cursor left or right in the rename box Inserts a space at the highlighted area Switches between uppercase and lowercase characters Deletes the character at the highlighted area Inserts a blank at the right of the highlighted area Erases all characters in the rename box OK Finalizes the name that you input Cancel Discards the name that you input 0…9, A…Z/…@ Inputs the numeral, character, or symbol at the highlighted location Rename box List button Using the name library When you press the list button beside the name, the name library will appear. Use the scroll bar to display the name you want to use, and press that name to input it in the list box. For details on the name library, refer to “Name Library List” (>p.186). Name library 1. METER Meter Trk View This displays the level meters and a list o...
Эта инструкция также подходит к моделям:Музыкальные инструменты - XTENDED DEFINITION D16XD (7.02 mb)