Оценок - 3, средний балл: 5
(
)
)
|
Фрагмент инструкции
If you set the module to be controlled by the expression pedal (>P27), you can control the parameter in real time when you select a patch that uses it. With the G2Nu, you will need to connect an external expression pedal (FP01/FP02). Delay tap, hold delay and delay mute Effect types that show these icons allow you to use a foot switch to set the delay time (DELAY TAP), to turn the hold delay function ON/OFF (HOLD) and to turn the DELAY module input mute ON/OFF (MUTE). To use these functions, you must connect a foot switch, set the function (>P26) and activate a compatible effect type. Module name Parameters 1–3 Shows the effect parameters that can be adjusted with Parameter knobs 1–3 and their setting ranges. Module knob Shows the position to recall the module. Effect type name When the module is ON, use the effect type [Ў]/[^] keys to select. : Manufacturer names andproductnames mentioned in thefollowing table are trademarksor registeredtrademarks of their respective owners. The names are used only to illustrate sonic characteristics and do not indicate any affiliation with ZOOM CORPORATION. ZOOM G2Nu/G2.1Nu 33 Effect Types and Parameters COMP (compressor) module This module reduces high level signals and increases low level signals. COMP (compressor) This compressor in the style of the MXR Dyna Comp. PARM1 PARM2 PARM3 Sense (sensitivity) 0 –10 ATTCK (attack) Slow, Fast Level 2–100 Adjusts the compressor sensitivity. Higher values result in higher sensitivity. Sets compressor attack speed to Fast or Slow. Adjusts the level of the signal after it has passed through the module. RackComp (rack compressor) This compressor allows more detailed adjustment than COMP. PARM1 PARM2 PARM3 THRSH (threshold) 0–50 Ratio 1–10 Level 2–100 Sets the level that activates the compressor. Adjusts the compression ratio. Adjusts the level of the signal after it has passed through the module. M Comp (M compressor) This compressor provides a more natural sound. PARM1 PARM2 PARM3 THRSH (threshold) 0–50 Ratio 1–10 Level 2–100 Sets the level that activates the compressor. Adjusts the compression ratio. Adjusts the level of the signal after it has passed through the module. ZOOM G2Nu/G2.1Nu Effect Types and Parameters EFX module This module includes wah and filter effects, as well as special effects such as a ring modulator and an octaver. AutoWah This effect varies wah in accordance with picking intensity. Resonance This effect varies the resonance filter frequency according to picking intensity. The two effect types above have the same parameters. PARM1 PARM2 PARM3 Sense (sensitivity) -10–.1, 1–10 Reso (resonance) 0–10 Level 2–100 Adjusts the sensitivity of the effect. When set to a negative value, the filter movement is reversed. Adjusts the intensity of the resonance sound. Adjusts the level of the signal after it has passed through the module. Booster The booster increases signal gain to make the sound more powerful. PARM1 PARM2 PARM3 Range 1–5 Tone 0–10 Level 2–100 Adjusts the frequency range that is boosted. Adjusts the tone. Adjusts the level of the signal after it has passed through the module. Tremolo This effect varies the volume at a regular rate. PARM1 PARM2 PARM3 Depth 0–100 Rate 0–50 Wave UP 0–9, DWN 0–9, TRI 0–9 Adjust the depth of the modulation. Adjusts the rate of the modulation. Sets the modulation waveform to "UP" (rising sawtooth), "DWN" (falling sawtooth) or "TRI" (triangular). Higher numerical values cause stronger clipping, which emphasizes the effect. ZOOM G2Nu/G2.1Nu Effect Types and Parameters RingMod (ring modulator) This effect produces a metallic ringing sound. Adjusting the "Freq" parameter results in a drastic change of sound character. PARM1 PARM2 PARM3 Freq (frequency) 1–50 Tone 0–10 Bal (balance) 0–100 Sets the frequency of the modulation. Adjusts the tone. Adjusts the balance between original and effect sounds. SlowATTCK (slow attack) This effect slows the attack of each note, resulting in a violin-like performance. PARM1 PARM2 PARM3 Time 1–50 Curve 0–10 Level 2–100 Adjusts the attack time. Set the curve of volume change during attack. Adjusts the level of the signal after it has passed through the module. Octave Adds an effect sound one octave below the unaffected sound. PARM1 PARM2 PARM3 Tone 0–10 OctLV (octave level) 0 –100 DryLV (dry level) 0–100 Adjusts the tone of the effect. Adjusts the volume of the effect. Adjusts the volume of the unaffected sound. PedalVox This simulates a vintage Vox wah pedal. PedalCry This simulates a vintage CRYBABY wah pedal. The two effect types above have the same parameters. PARM1 PARM2 PARM3 Freq (frequency) 1–50 DryMX (dry mix) 0–10 Level 2–100 Adjusts the emphasized frequency. When an expression pedal is not used, the effect is similar to a half open pedal. Adjusts the mix with the unaffected sound. Adjusts the level of the signal after it has passed through the module. ZOOM G2Nu/G2.1Nu Effect Types and Parameters ZNR (ZOOM noise reduction) module This module ...
Эта инструкция также подходит к моделям:Музыкальные инструменты - G2.1NU (14.8 mb)