Оценок - 5, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
You may want to finetune the playability for your own personal style, different string gauges, or after seasonal environmental changes. Before making any adjustments, you’ll need to verify the proper neck relief. With the guitar tuned, press the low E string down at both the 1st and 22nd frets (a capo comes in handy here) and check the distance between the top of the 8th fret and the bottom of the low E string. Ideally, you’ll see a gap about the same size as the diameter of the high E string. If you see too much relief, you need to increase the truss rod tension, by turning the truss rod adjusting nut clockwise with the included tool. (Remove the cover first, of course!) If you don’t see enough relief, or if the string is touching the 8th fret, you need to decrease the truss rod tension, by turning the truss rod adjusting nut counter-clockwise. Never force the truss rod, and if you are uncomfortable or unfamiliar with this kind of adjustment, take your guitar to a qualified service center. Clockwise = Less Relief Check Gap Here Press Here And Here 9 The MaxConnect bridge can be easily adjusted for string height (action) and string length (intonation). To lower the action of either the treble or bass strings, turn the appropriate bridge post clock clockwise with the supplied tool. To raise the action, turn the appropriate bridge post counter clockwise. The MaxConnect is designed to fit the bridge posts tightly, so don’t adjust one side too far without also adjusting the other. Changes in neck relief, string action, or string gauges can all change intonation. Luckily, the MaxConnect bridge provides a wide range of intonation adjustment. You’ll need either a good tuner or good ears to verify correct intonation. For each string, just compare the pitch of the note fretted at the 12th fret to the pitch of the 12th fret harmonic. If the fretted note is flat (lower than the harmonic), you’ll need to make the string shorter by turning the intonation adjust screw clockwise. If the fretted note is sharp (higher than the harmonic), you’ll need to make the string longer by turning the intonation adjust screw counter clockwise. The height of Three-90 and CoAxe pickups adjust the same way—by turning the mounting screws either clockwise (down, lower output) or counter clockwise (up, higher output). Remember to leave plenty of clearance for the vibrating strings. Clockwise = Lower Pickup Height Clockwise = Lower String Action Clockwise = Shorter String Length CARE AND MAINTENANCE A little effort will keep your new VOX guitar looking great for years to come. When you finish playing, wipe the guitar down with a clean, soft cloth. Use a quality guitar polish occasionally, following the manufacturer’s instructions. Protect your instrument from temperature extremes and sudden changes in temperature. A guitar left in a hot trunk of a car at full string tension can literally pull itself apart. A sudden blast of warm air on a cold guitar can crack the finish. Your VOX g...
Эта инструкция также подходит к моделям:Музыкальные инструменты - VIRAGE SDC-33 (4.27 mb)
Музыкальные инструменты - VIRAGE HDC-77 (4.27 mb)
Музыкальные инструменты - VIRAGE SDC-33 (4.27 mb)
Музыкальные инструменты - VIRAGE HDC-77 (4.27 mb)