Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
5. EXTERNAL SPEAKER (8W minimum) - Use this output jack when one 8W speaker enclosure is to be connected to the Stage 100 for additional output. The Stage 100’s internal speaker must be connected while using this jack. 6. LINE OUT - This balanced XLR line-level output is designed for connection to an external power amplifier or main house mixer. The signal from this output jack includes all tone shaping done by the amplifier. 7. RETURN - This 1/4 inch, unbalanced, TS, line- level input jack is designed to accept a signal from external effects devices or another amplifier in a “daisy-chain” configuration. 8. SEND - This 1/4 inch, unbalanced, TS, line-level output jack is designed to feed the preamp signal to external effects devices or to an “add-on” amplifier in a daisy-chain configuration. 9 . FOOTSWITCH -Connect the footswitch at this jack. The two-button footswitch enables switching between Normal and Drive channels and ON/OFF switching of the MORE DRIVE p re-amplifier boost. Using this jack disables these switching functions f rom the front panel. NOTE: Connecting the footswitch with an unshielded speaker type cord is p referable to using a shielded coaxial guitar cord . S SSp ppe eec cci iif ffi iic cca aat tti iio oon nns ss Stage 100 (combo) Stage 160 (combo) Stage 100H (head only) TYPE: PR 401 PR 400 PR 453 PART NUMBER: 22-6700 (120V, 60Hz) US 22-6800 (120V, 60Hz) US 22-6900 (120V, 60Hz) US 22-6730 (240V, 50Hz) Aust 22-6830 (240V, 50Hz) Aust 22-6930 (240V, 50Hz) Aust 22-6740 (230V, 50Hz) UK 22-6840 (230V, 50Hz) UK 22-6940 (230V, 50Hz) UK 22-6760 (230V, 50Hz) Eur 22-6860 (230V, 50Hz) Eur 22-6960 (230V, 50Hz) Eur 22-6770 (100V, 50/60Hz) Jpn 22-6870 (100V, 50/60Hz) Jpn 22-6970 (100V, 50/60Hz) Jpn POWER REQUIREMENTS: 400W 400W 400W POWER OUTPUT: 100W RMS into 8W @ 5%THD 160W RMS into 4W @ 5%THD 100W RMS into 8W @ 5%THD (WITH EXTENSION SPEAKER): 160W RMS into 4W @ 5%THD N/A 160W RMS into 4W @ 5%THD INPUT IMPEDANCE: INPUT 1: 850kW, INPUT 2: 66kW INPUT1: 850kW, INPUT 2: 66kW INPUT1: 850kW, INPUT 2: 66kW FX SEND OUTPUTIMPEDANCE: 1kW 1kW 1kW FX RETURN INPUT IMPEDANCE: 10kW 10kW 10kW POWER AMPIN SENSITIVITY: 810mV for 160W into 4W @1kHz 810mV for 160W into 4W @1kHz 810mV for 160W into 4W @1kHz 620mV for 100W into 8W @1kHz N/A 620mV for 100W into 8W @1kHz FUSE: 4A125V for 100V / 120V ver 4A125V for 100V /120V ver 4A125V for 100V /120V ver 2A250V for 230V / 240V ver 2A250V for 230V / 240V ver 2A250V for 230V / 240V ver FOOTSWITCH: 2 Button - (P/N 050419) 2 Button - (P/N 050419) 2 Button - (P/N 050419) Normal/Drive, Drive/More Drive Normal/Drive, Drive/More Drive Normal/Drive, Drive/More Drive SPEAKER COMPLIMENT: One 8W Celestion G12T-100 Two 8W Celestion G12T-100 N/A 12” speaker (P/N 054420) 12” speakers (P/N 054420) DIMENSIONS: HEIGHT: 17.5 in. (45 cm) 18.5 in. (47 cm) 8.5 in. (22 cm) WIDTH: 22.4 in. (57 cm) 26.1 in. (66 cm) 22.4 in. (57 cm) DEPTH: 10.2 in. (26 cm) 10.3 in. (26 cm) 9.5 in. (24 cm) WEIGHT: 42 lbs. (19.1 kg) 53 lbs. (24.1kg) 24 lbs. (10.9 kg) Product specifications are subject to change without notice. 5 6 8 10 12 14 A PRODUCT OF: FENDER MUSICAL INSTRUMENTS CORPORATION CORONA, CA USA Fender® is a registered trademark of FMIC P/N 054256 REV B ...
Эта инструкция также подходит к моделям:Музыкальные инструменты - 100 (367.1 kb)
Музыкальные инструменты - 100H (367.1 kb)