Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
The mono-stereo switch selects between mono and stereo operation. In mono mode the upper or left meter functions as a phase correlation meter, while the lower or right meter always indicates the greater of the two signals L or R. LEDs indicate which channel is greater. The meters can be backlit. A three position switch selects Low, High and Off. 6.5 Mixer Operator's Monitor The mixer operator's monitoring headphone amplifier is on the left hand side of the module. A selector switch chooses between the different sound sources: Off, Left, Right, Mono, Stereo and Auxiliary. A switch selects between normal or MS-decoded monitoring. In MS-mode the M-(left) channel is applied to both L & R channels in phase and the S-(right) channel is applied in phase to the left channel and out of phase to the right channel. The ratio M to S is fixed (this decoder is only for monitoring and does not affect the main mix). The phones potentiometer controls the headphone level for the mixer operator. The Mic potentiometer controls the level of the operator's slate microphone. The SX-S has a built-in slate microphone that is located next to the Stop/Roll switch on the module. An external slate microphone can be connected to the extension module. Many operators prefer to use a slate microphone on their Headsets, which guarantees them more freedom while working. If you have been using the internal slate microphone and want to use an external slate microphone, you should ask your dealer for the external slate mic input. An internal jumper, JP-1 (on the operator ext. Module PCB), lets you select 48 volt phantom power operation on the slate microphone. Sidetone is available on the monitor and is adjustable by means of an internal trimmer (P-3). Sidetone is either pre mic level or post mic level. (Jumper-4 : pos. 1-2 pre, pos. 2-3 post). 6.6 Boom Operator's Monitor The boom operator's monitoring headphone amplifier is on the right hand side of the module. A selector switch chooses between the different sound sources: Off, Left, Right, Mono, Stereo and Auxiliary. A switch selects between normal or MS-decoded monitoring. In MS-mode the M-(left) channel is applied to both L & R channels in phase and the S-(right) channel is applied in phase to the left chanel and out of phase to the right channel. The ratio M to S is fixed (this decoder is only for monitoring and does not affect the main mix). The phones potentiometer controls the headphone level for the boom operator. The Ret potentiometer controls the (Return) level of the boom operator's talkback microphone. The boom operator's talkback microphone connects to the boom box or, with the necessary Y-cables on the SX-S side, to a microphone transmitter or any other cable. An internal jumper, JP-1 (on the Boom ext module PCB), lets you select 48 volt phantom power operation for the boom operator's tbk mic. Sidetone is available on the monitor and is adjustable by the means of an internal trimmer (P-3). Sidetone is either pre mic level or post mic level. (Jumper-4 : pos. 1-2 pre, pos. 2-3 post). 6.7 Communication The SX-S Extension Module has comprehensive communication features. The mixer operator can talk to three different destinations and can receive calls from the boom operator. file://D:\Z_Library\Webcopy\sonosax\SXS\sxsume.html 26.08.2004 SONOSAX SX/S USER MANUAL Seite 13 von 22 6.8 Slate button The slate button routes the slate microphone to the main L & R outputs, and if jumper 9 is installed, also to the AUX mix-bus (jumper 9-slate to AUX). By selecting pos. 4 on the DIP mini-switch a 27 Hz slate tone is sent to the main mix, and AUX (if jumper 9 is installed), every time you press the slate button. 6.9 Guest button When pressing the Guest button the slate microphone is routed to the guest monomix. This allows the mixer operator to talk to the agency folk independently and lets her or him keep the so called "private line " with the boom operator. 6.10 Boom button The boom button routes the slate microphone to the boom operator's headphone monitor and it also routes the boom operator's tbk microphone to the mixer operator's headphone monitor if "Boom active" is off. If boom active is on, (DIP mini-switch S-1 pos. 2 on), the boom operators tbk mic is permanently routed to the mixer operator's headphone monitor. 6.11 Boom LED This LED lights as soon as the boom operator pushes his call button on the boom box, (provided that pin-6 of the 6 pin Neutrik and Gnd are connected to the Boom Box and the SX-S). This feature is used for the boom operator to call the mixer operator without disturbing the mixer operator in his work. There are 2 modes configurable by the DIP-mini switch: • Memory: The call LED will light and stay lit until the mixer operator pushes the boom operator button on the extension module which resets the LED. This operation implies that the mixer operator and boom operator can talk to each other while the mixer operator is pushing the boom button. After the operation is com...
Эта инструкция также подходит к моделям:Музыкальные инструменты - Professional Portable Mixing Console SX-V (179.26 kb)