Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
Turn Key Lock on or off by pressing the button to the top right of the Virtual Deck. Tip: F5 and F10 will turn Key Lock on and off for the left and right decks respectively. Left deck Right deck Jump to cue points 6789o Set new cue point J< J> Set cue point color Play from cue point Delete cue point Set new cue point Jump to cue points Set new cue point 12345 Note: Cue point shortcuts are fixed to their position on the keyboard, not the key numbers, so that they are the same regardless of keyboard language. Keep Caps Lock on when using these shortcuts. Tip: use the keyboard shortcuts ctrl-comma (for left) and ctrl-dot (for right) to place cue points. Manual-9 To remove a cue point, use the x button on the right side of the cue point panel. A cue point can occupy any of the 5 slots. You can drag and drop cue points to change their order in the list. If you wish to have the cue points sorted chronologically, check the sort cues chronologically option in the setup screen. If you load the same track on to both decks, you will be able to add or modify cue points from either deck. When you press a jump to cue point button while you are not playing, it plays forward for as long as you hold down the cue point button, and jumps back to the cue point when you release the mouse button. Tip: use the keyboard shortcuts ctrl-comma (for left) and ctrldot (for right) to place cue points. Looping You can save up to 9 loops per track; these loops are saved in the file, and will be present when you reload the track. To make a loop, set the in-point by clicking the in button, and the out-point by clicking the out button. To turn the loop on or off, click the loop button. If you want the playhead to jump to the start of the loop when you enable the loop, hold the control key and press the loop button. To adjust the in-point of the loop, click the in button. You can use the arrow keys: • to move the in-point towards the start of the track, . to move the in-point towards the end of the track. Hold down the shift key while pressing the arrow key to make coarse adjustments. Click the in button again to save the in-point. The same applies to adjusting the out-point. There are 9 available loop slots per track. If a loop is set in a given slot, the background (behind the loop number) will be green. Press the x button to clear the loop. If you click on the number of a occupied loop slot, a red border will appear. This indicates the loop is locked, and you will not be able to adjust the end points or delete the loop until you unlock it, by clicking on the number again. Autoplay Click the auto button to enable autoplay. With this setting turned on, when one track finishes playing, the next track starts automatically. Load from a crate to play through the songs in that crate, or from your library to play through your library. Use the next ..| and previous |.. buttons to jump to the next track or go to the previous track in the list. Play from start must be checked in the setup screen. Repeat Use the repeat function to repeat the song. Tip: Short “loop” samples can be turned into a continuous track using repeat function. The loops need to be less than 10 seconds long, and cut at the start and end of a bar. Tap Tempo For tracks with no BPM information, there is a tap tempo button displayed where the BPM usually is, in the song info area. Pressing alt-space bar activates the tempo tapper (press altspace bar a second time to activate the tempo tapper on the right Virtual Deck). Tap the space bar along with the beat. After you’ve tapped the first beat, you can switch to double time tapping, half time, start of each bar etc. The range is set by the first two taps, after that you can switch to any steady rhythm you feel comfortable with – quarter notes, half note, whole notes. Esc resets the BPM, Enter saves the BPM to the track. You can use the mouse if you prefer. Your CD player or turntable’s pitch slider doesn’t need to be at zero, we do the math for you. You can also use the tempo tapper when no song is loaded, for finding the BPM of regular records, for example. Manual-10 Visual aids When the track is playing several waveforms are displayed. Each shows a different aspect of the track being played. Track Overview display This view provides a complete overview of the waveform of the track, and includes a marker to show the current position within the track. This view is useful for finding transitions within the track. The waveform is colored according to the spectrum of the sound – red representing low frequency bass sounds, green representing mid frequency sounds and blue representing high frequency treble sounds. You can jump to different positions within the track by clicking on the Track Overview display. Grey lines behind the overview show the length of the track – a thin grey line every minute, and a thick grey line every 5 minutes. The overview will be filled when you load the track onto a Virtual Deck. You can also build the overview...
Эта инструкция также подходит к моделям:Музыкальные инструменты - Scratch 17357 (1.91 mb)