Оценок - 3, средний балл: 3.7
(
)
)
|
Фото и характеристики Pioneer CDJ-2000 |
Фрагмент инструкции
Is the auto cue function activated? Track searching may take some time when there are long silent sections between tracks. -If track searching is not possible within 10 seconds, a cue point is set at the beginning of the track. Back cue function does not work. Is a cue point set? Set the cue point (page 16). Loop play function does not work. Is a cue point set? Set the cue point (page 16). Settings are not stored in the memory. Has the power been turned off directly after changing the After changing settings, wait at least 10 seconds before turning the power setting? off. USB device is not recognized. Is the USB device properly connected? Connect the device securely (all the way in). Is the USB device connected via a USB hub? USB hubs cannot be used. Is the USB device supported by the CDJ-2000? This player only supports USB mass storage class devices. This player supports portable flash memory and digital audio playback devices. Is the file format supported by the CDJ-2000? Check the file format of the connected USB device. For the file formats supported by the CDJ-2000, see About USB devices on page 8. -Turn the power off then back on. Cue points or loops of tracks recorded on SD memory Is there sufficient free space on the SD memory card/USB A maximum of 100 cue and loop points per disc can be recorded on SD cards/USB devices are not stored in the memory. device? memory cards/USB devices (10 per track for media other than discs). If you attempt to record more points than the limit, [POINT FULL] is displayed and the points cannot be recorded. If the SD memory card is write-protected, [CARD PROTECTED] is displayed and the points cannot be recorded. If there is not enough free space on the USB device or if the device is write- protected, [USB FULL] is displayed and the points cannot be recorded. Cue points or loops of tracks recorded on SD memory Has the SD memory card/USB device been properly Points may not be displayed if the SD memory card/USB device is removed cards/USB devices are not displayed. removed? without performing the proper stopping procedure or if the CDJ-2000’s power is turned off. The playing address display is not displayed in the -When playing files recorded in VBR, it may happen that the set cannot remaining time mode.detect the length of the track immediately and that some time is required for the playing address display to appear. Time is required to read SD memory cards/USB Is there a large number of folders or files recorded on the When there are many folders or files, some time may be required for load- devices (flash memory drives and hard discs). SD memory card/USB device? ing. Are files other than music files stored on the SD memory When files other than music files are stored in folders, time is required to card/USB device? read them as well. Do not store files or folders other than music files on the USB device. Library browsing is not possible. Is a medium on which library information is recorded The library browse mode is only set when media on which library informaloaded? tion is recorded are loaded. When a medium on which no library information is recorded is loaded, the folder browse mode is set. [HISTORY] is not displayed. Is an SD memory card/USB device loaded? The [HISTORY] function can only be used for DJ players on which an SD memory card/USB device is loaded. Nothing is displayed. Is the power management function activated? The CDJ-2000 is shipped with the power management function turned on. If you do not want to use the power management function, set [AUTO STANDBY] to [OFF]. (page 22) 28 En Problem Check Remedy PRO DJ LINK does not work well. Are the player numbers properly set? Set [PLAYER No.] to [AUTO] or to a number different from the number currently set. (page 22) Is the LAN cable properly connected? Connect the LAN cable properly to the [LINK] terminal. Is the switching hub’s power turned on? Turn the switching hub’s power on. Is an unnecessary device connected to the switching hub? Disconnect the unnecessary device from the switching hub. About the liquid crystal display . Small black or shining points may appear on the liquid crystal display. This is a phenomenon inherent to liquid crystal displays; this is not a malfunction. . When using in cold places, the liquid crystal display may be dark for a while after the CDJ-2000’s power is turned on. It will reach the normal brightness after a while. . When the liquid crystal display is exposed to direct sunlight, the light will reflect off it, making it difficult to see. Block the direct sunlight. Error messages When the CDJ-2000 cannot operate normally, an error code appears on the display. Take the necessary measures, referring to the table below. If an error code not Additional information indicated on the table below is displayed or if the same error code appears after the indicated action has been taken, contact your store of purchase or nearby Pioneer service station. Error code Error type Description of ...