Оценок - 5, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
This unit wasdeveloped using the expertise of professional sound engineersand working musicians. You will find that your new PMX-420powered mixer has superior performance and greater flexibilitythan any other powered mixer in its price range. Please read thismanual carefully to get the most out of your new unit. Thanks forselecting NADY AUDIO as your choice in powered mixers F E AT U R E S • This amazingly compact 6-channel powered mixer can pumpout 420W RMS, complete with Echo Effects and Submixes, while capable of handling 11 total inputs simultaneously! • 2 Mono channels each with balanced XLR Mic and 1/4" TRSline inputs and 2 Stereo channels with input A or B selectorswitch for each channel, Effects Return and Submix 1 & 2 Return with dedicated Volume/Pan for a total of 11simultaneous inputs • Power Output – 2 x 210W RMS @ 4 ohms (1% THD) with bothchannels driven. Advanced amplifier design features includefan cooling, short circuit protection, speaker DC protectioncircuits, clip indicators for utmost safety and reliability andpower ON/OFF anti-thump circuit for quietest operation • Stereo L-R Master Mix and S1-2 Group Submix buses, with 4master faders and submix to main enable switch and Pan controls • Built-in Echo Effects 32-bit DSP emulates plate, gate, room, hall, and stadium reverb • Full complement of input controls, connections and indicators: Channel Trim controls, Peak LED’s, High, Mid, and Low EQ’s; Channel Submix assign and PFL buttons, EFF Send controls, Pan and Volume controls • Effects Send and Return with level control; 2 X 5-segment LEDdisplay bargraph meters with L-R/S1-2/EFF and PFL selectorand Power Amp peak indicator • Output insert jacks on all L-R and Submix outputs for addingeffects or compression before the amplifier • Stereo headphone output with L-R/G1-2/PFL selector andseparate volume adjust • Outputs include Line Level Left and Right, Submix 1-2, LowFrequency output, and 1/4" Speaker outputs for Left and Right • Internal shielded AC supply with 115V(60Hz)/230V(50Hz) select switch • Dimension & Weight: 4.5” x 11.4” x 12.3" (114 x 290 x 312mm); 18.8 lbs. (8.5 Kg) C O N T E N T S FEATURES ................................................................................2 WARNING ..................................................................................3 INSTALLATION ..........................................................................4 1. Inspection ..............................................................................4 2. Setup and Operation ............................................................4 CONTROLS AND CONNECTIONS............................................5 1. Channel Section ....................................................................5 2. Master and Effects Section ....................................................6 3. Master Input / Output Section ................................................7 4. Rear Panel..............................................................................8 CONNECTIONS ........................................................................9 BLOCK DIAGRAM ....................................................................10 SPECIFICATIONS ....................................................................11 Date of Purchase Dealer’s Name City State Zip Model # Serial # 2 WA R N I N G IMPORTANT SAFETY INSTRUCTIONS When using this electronic device, basic precautions should always be taken, including the following: 1. Read all instructions before using the product. 2. Do not use this product near water (e.g., near a bathtub, washbowl, kitchen sink, in a wet basement, or near a swimming pool, etc.). 3. This product should be used only with a cart or stand that will keep it level and stable and prevent wobbling. 4. This product, in combination with headphones or speakers, may be capable of producing sound levels that could cause permanent hearing loss. Do not operate for a long period of time at a high volume level or at a level that is uncomfortable. If you experience any hearing loss or ringing in the ears, you should consult an audiologist. 5. The product should be positioned so that proper ventilation is maintained. 6. The product should be located away from heat sources such as radiators, heat vents, or other devices (including amplifiers) that produce heat. 7. The product should be connected to a power supply only of the type described in the operating instructions or as marked on the product. Replace the fuse only with one of the specified type, size, and correct rating. 8. The power supply cord should: (1) be undamaged, (2) never share an outlet or extension cord with other devices so that the outlet’s or extension cord’s power rating is exceeded, and (3) never be left plugged into the outlet when not being used for a long period of time. 9. Care should be taken so that objects do not fall into, and liquids are not spilled through, the enclosure’s openings. 10. The product should be serviced by qu...