Оценок - 3, средний балл: 5
(
)
)
|
Фрагмент инструкции
Wearing anti-static wrist straps is even an more effective precautionary measure. • When temporarily putting the board down or aside, place it on top of the anti-static bag (which originally contained the board). Do not bring any metat parts on the board into contact with any metal parts of any other boards. 1. Exit the system, turn the power switch to the "OFF" position, and unplug the power plug from the power outlet. For details on the procedure for exiting the system, refer to the Operating Instructions of the main kit (AY-NE2000). 2. Remove the four screws on the left and right side panels of the main unit (AY-NE2000) to remove the front panei. Ensure that these screws are not misplaced. 3. Next, remove the five screws to remove the protective cover. Ensure that these screws are not misplaced. 4. Remove the mixer board which is the fourth board from the top. It can be removed by pulling the catches toward you. 5. Plug the connectors on the 3D effect board into the connectors on the mixer board (3 locations). 6. Fasten the board securely using the three mounting screws (supplied). 7. Pull the catches on the board toward you. and insert the board which you have removed so that it is returned to its original position. Push the catches down to secure the board. Push them down as far as they will go. 8. Check that the board has been properly inserted. 9. Attach the protective cover using the five screws. 10. Then attach the front panel using the four screws. 11. Check that the front panel is firmly secured (mounted in place). 12. Plug the power plug into the power outlet, and set the power switch to the ‘ON” position. Check that the system now starts up. For details on the procedure for starting up the system, refer to the Operating Instructions of the main kit (AY-NE2000). 6. Fasten the board securely using the three mounting screws (supplied). 5. Plug the connectors on the 3D effect board into the connectors on the mixer board (3 locations). 4. Pull the catches toward you to remove the mixer board which is the fourth board from the top. 3. Remove the five screws to remove the protective cover 2. Remove the four screws to remove the front panel. Push in the direction 1 shown by the arrow whenN the board is to be installed. Front pane! SPECIFICATIONS Power Supply: Ambient Operating Temperature: Ambient Operating Humidity: Input/Output Facilities: 5V DC 5°C to 35°C 10% to 90% 60-pin connector x 2, 20-pin connector x 1 Dimensions (W x H x D): Weight: Accessories supplied: 235 x 20 x 320 mm (91/4’ x «y,6- x 125/a") 750 g (26,5 oz.) Mounting screws x 3 Panasonic PANASONIC BROADCAST & DlGiTAL SYSTEMS COMPANY DIVISION OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA Executive Office: 3330 Cahuenga Btvd W., Los Angeles. CA 90068 {323)436-3500 EASTERN ZONE: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201)348-7621 Mid-Atlantic: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201)348-7621 Southea*t Region: 1225 Northbrook Parkway. Sie 1-160 Suwanee. GA 30024 (770)338-6845 Central Region: 1707 N Randall Road E1-C-1. Elgin. IL 60123 (847)468-5200 WESTERN ZONE: 3330 Cahuenga Blvd W., Los Angeles. CA 90068 (323)436-3500 Dalies Region: 6226 Abtnglon Way, Houston, TX 77008 (713)802-2726 Government Marketing Department: 52 West GuöeDrrve. Rockville, MD 20850 (301)738-3840 PANASONIC CANADA INC. 5770 Ajntter Drive, Mississauga, Ontario L4W 2T3 (905)238-2115 PANASONIC SALES COMPANY DIVISION OF MATSUSHITA ELECTRIC OF PUERTO RICO. INC. San Gabriel Industrial Park, 65th Infantry Ave., KM9.5 Carolina, Puerto Rico 00630 (809)750...