Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
In order to achieve optimum performance from your Programax 10, it is necessary to understand the unique capabilities of the amplifier. Any combination of control settings may be stored in one of the amplifier’s ten storage locations. When a program is stored, a digital value is assigned to the relative position of each control; it is these digital values that are “remembered” by the amplifier's memory circuits. Program information includes values for all controls except the MAN and MUTE keys and the Master Volume Control. When a program is recalled, the digital information corresponding to that program will determine the relative “position” of each control. Program creation, storage, and recall are easily learned. The Programax 10 is supplied with ten programs in place, which were input by Peavey factory technicians during manufacture of the amplifier. Although these “factory” programs present a wide range of tonalities, they may not be perfect for every player’s needs. Asa Programax 10 owner, it will be necessary to learn how to quickly recall, store, modify, or create a program. Program Recall To recall any program which exists in memory, simply press the Bank A/B Key (M) until the LED above the correct bank lights. Then press and quickly release the appropriate Program Key (1 through 5) to select the program location in which the program is stored. This action (two keystrokes) will automatically recall any desired program. The amplifier will now perform in accordance with the information within that program, regardless of the physical position of the amplifier’s controls. Any program may be recalled by this same procedure: press the appropriate Bank and Program Keys and the program is recalled. When recalling another program within the same bank, it is not necessary to reselect the bank. For example, if program B2 has previously been selected, and program B5 is desired, it is not necessary to reselect the Bank. Simply pressing Program Key 5 will recall the desired program. Program Modification Any stored program may be easily modified simply by altering the position of the appropriate controls. Remember that when a program is recalled, the positions of the amplifier’s controls have no effect on the performance of the amplifier, UNTIL A CONTROL’S POSITION IS ALTERED. Whenever the Programax 10 “senses” that a control is being moved, the amplifier will automatically cause the control’s actual position to “override” the stored program information FOR THAT CONTROL ONLY. For example, suppose that a bit more Saturation is desired within a particular program. Simply turn the Saturation control until the desired setting is reached. The program is now modified and is ready to be stored in its altered state. When a program is being modified, only those controls which have been physically moved will change in value; if a control’s position has not been altered, the programmed values will be unchanged. Whenever a program is modified in any way, the LED indicator on the Program Key will begin to flash on and off. To store a modified program in the same location, press the program key and hold it until the LED stoDS flashing. To “cancel” any modifications and return to the original program, press the program key and quickly release it. Program Creation Programs may be created “from scratch" by adjusting the amplifier's controls to the desired positions. T o create a new program, first press the MAN Key (S) on the Program Control Switch Matrix. This will place the amplifier in manual mode, and all controls will be operating at their indicated values. Adjustment of any control or controls will create a new program. When the new program is satisfactorily adjusted, it may be stored in any location. Program Storage Any program — new, modified, or existing — may be stored in any chosen location. To store a newly created or modified program, decide which bank and program locations will be used. Press the Bank A/B Key to select the correct bank. Then press the correct Program Key and HOLD THE KEY IN UNTIL THE LED STOPS FLASHING (about three seconds). The program is now stored in the selected location. To move an existing program to a new location, the program must first be recalled (see Program Recall), then it may be stored in the new location in the manner described above. It should be noted that any program so moved will now exist in both the old and new locations. It should also be noted that any time a program is stored into a particular location, any information previously stored in that location will be erased. Care should be taken to ensure that a valuable program is not inadvertently destroyed by careless program storage. Program Retention The Programax 10 contains a special rechargeable internal battery to protect and maintain stored programs while the amplifier is not in use. When the amplifier is in use (power on), an internal circuit automatically recharges the battery. During periods when the am...
Эта инструкция также подходит к моделям:Музыкальные инструменты - Programax 10 (2.39 mb)