Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
Connect ER-1 power supply .. connect audio cables from L/MONO1 and RIGHT outputs to powered monitor system, or use headphones (phone jack) .. connect external source(CD player, synth, mic, etc.) to Audio In 1 and 2 .. power-up monitor system and ER-1. 2. Part 1 key in PERCUSSION SYTHESIZER section will light on power-up .. strike any Part key repeatedly .. set MASTER VOLUME knob / monitor volume. Playing the demo songs 1. Press SONG key. (Display indicates "S.01" – one of 7 demo songs) .. press PLAY [> II] to playback demo song .. adjust volume to suit .. press STOP [[]] to stop playback .. to play additional demo songs, rotate DIAL to “S02” or “S03” .. PLAY. Pattern mode 256 patterns in internal memory – all user-programmable 1. Press PATTERN key .. press CURSOR .. to set to "Pattern" (1st row, PATTERN column in matrix below display). 2. Rotate DIAL to select any Pattern number (A.01 – d.27) .. press PLAY. The pattern will loop .. press STOP to stop playback .. rotate DIAL to select and PLAY additional patterns. ! Rotate DIAL as current pattern plays to select a new pattern - when the current pattern ends, the new pattern will begin. (When you change patterns in this way, new pattern selected will playback at same tempo as previous pattern. To playback new pattern at its original tempo, STOP pattern playback, then select and PLAY new pattern. Working with Tempo: 1. Press PATTERN .. select any pattern .. press PLAY .. CURSOR .. to Tempo (LED lights) .. rotate DIAL to set tempo .. to use TAP tempo function: As pattern plays, strike TAP key 3x to set new tempo .. press STOP to stop playback. Working with Parts: 4 drum synth parts, 4 PCM parts – trigger parts manually and edit with knobs and switches 1. Press PATTERN .. rotate DIAL to select any pattern .. strike any part key (other than Audio and Accent) ..tweak the knobs and switches, to edit the part. Note that Original Value LED lights when original knob/switch settings are recalled .. PLAY pattern, select and tweak parts. Realtime Pattern Control ! Before you continue, turn OFF memory protect: Press GLOBAL .. CURSOR to Protect .. Rotate DIAL to “off” .. Press the PATTERN key to return to PATTERN mode. Copy a preset pattern to a new location: 1. Press PATTERN .. press CURSOR .. to set to "Pattern" .. rotate DIAL to select any pattern .. press WRITE .. rotate DIAL to pattern d.64 .. press WRITE again to copy the source pattern to d.64. In-store demo suggestion: Use pattern d.64 as the edit “target pattern” for all of your demos! Tweak the copied pattern: 1. Change Tempo: (see “Changing Tempo” on the previous page). 2. Retrigger pattern Playback: As pattern plays, hold down Shift and press PLAY repeatedly, to “force” pattern playback to first beat of the measure. 3. Tweak the pattern: Strike the part keys .. work with the knobs and switches as pattern plays - create an edited set of part sounds using the existing pattern .. try striking any part key .. then select Tempo Delay with the Typekey (tweak effect with the Depth and Time knobs). 4. Select one of the drum synth parts (1-4) and try changing the waveform with the Wave key – note that Pitch is the one parameter in the OSCILLATOR area that works on PCM as well as synth parts. 5. Tweak the pattern data itself: As pattern plays, press any part key .. press to add/remove steps from the 16 step keys (lit/unlit) press the Accent key and set new accents on the 16 step keys (use Level knob to set overall accent level). 6. SOLO and MUTE parts: Press and hold down SOLO and press a part key (it will light) (or group of part keys). Press SOLO again to defeat solo .. press and hold down MUTE (TAP), then press a part key (or group of part keys) to mute/unmute parts (lit/unlit) .. press STOP .. press WRITE 2x to write edited pattern to memory. Motion Sequencing: Record knob and switch changes for each part and the delay Record Motion sequences in the previous pattern: 1. Press Part 1 part key (it will light) .. hold Shift and press step key 11 (Clear Motion) 2x, to clear previous Motion sequence for Part 1 .. repeat this step for each part in the pattern. 2. Press to select Part 1 key (it will light) .. in PART edit section, press Motion Seq to select Smooth or Trig Hold (it will light) .. press REC key (left of STOP). REC will light, and PLAY will flash. 3. Press PLAY to begin recording .. rotate Pitch/Speed knob. When pattern reaches last step, REC light will go out and pattern will continue to play - you'll hear new Motion sequence .. while pattern loops, press Motion Seq key to select Smooth or Trig Hold, and listen to difference in playback. (you can SOLO the part to get a better idea) 4. Press STOP .. press to select Part 2 key (it will light), then select either Smooth or TrigHold as type of Motion Sequence .. press REC .. press PLAY to record .. toggle Reverse key off / on, to record new Motion sequence for part 2 .. press STOP .. press WRITE 2x to write pattern with the two new Motion sequences. ! Each time y...