Войти:
Оценок - 4, средний балл: 3.8 ( )

Инструкция по эксплуатации Roland, модель Acoustic Chorus AC-33

Производитель: Roland
Размер: 15.79 mb
Название файла: AC-33_OM.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


Turn the [ANTI-FEEDBACK] switch ON. The anti-feedback function will be applied to the microphone or guitar connected to the GUITAR CHANNEL and MIC/LINE CHANNEL inputs. 0 In order to prevent feedback from occurring during your performance, we recommend that you turn the anti-feedback function on before you begin performing. The anti-feedback function will be reset when you turn the power off, then on again. * If the anti-feedback function is not enough to suppress feedback, take the following steps • Change the direction of the guitar or microphone • Move the guitar or microphone away from the speakers • Lower the volume What is the anti-feedback function? This function suppresses the acoustic feedback that can occur between a guitar or microphone and the amp. It does this by attenuating the sound in the frequency range at which feedback is occurring. Feedback will be suppressed automatically when you use the anti-feedback function. « ■o « 11 | Various Ways to Use the AC-33 Singer/performer Miking your instrument You can sing while playing your guitar. • Connect your guitar to the GUITAR CHANNEL. • Connect your microphone to the MIC/LINE CHANNEL. Point the microphone at your instrument to capture the sound. • Connect your microphone to the MIC/LINE CHANNEL. Guitar duo Blending sound from two types of pickups Here's how two guitarists can perform. • Connect one guitar to the GUITAR CHANNEL. • Connect the other guitar (with a built-in preamp) to the MIC/LINE CHANNEL. If your guitar has two types of pickups, you can use the AC-33 to mix their outputs. • Connect the pickup attached to the sound hole of your guitar to the GUITAR CHANNEL input. • Connect the pickup (with internal preamp) built into your guitar to the MIC/LINE CHANNEL input. 12 Using the Looper function to record, play back, and play along with a rhythm 2. Play back the rhythm 'c¡& c\äP Press the [REC/ PLAY/OVERDUB] button once again. By using a momentary-type foot switch (BOSS FS-5U or FS-6; sold separately) you can operate the Looper's [REC/PLAY/OVERDUB] button and [STOP/ CLEAR] button with your foot. | Using the Arm Stand When using the AC-33 at a low position such as on the floor, extending the arm stand will make the sound from the speakers easier to hear. If you use the arm stand, you must place the AC-33 on a horizontal surface. Fold the arm stand if you're not using it. Do not lift or carry the AC-33 by grasping its arm stand. When using the arm stand, do not place objects on the AC-33, or sit or stand on the AC-33. Take care not to pinch your fingers when folding the arm stand. ■o c _2 Эта инструкция также подходит к моделям:
Музыкальные инструменты - AC-33 (15.79 mb)


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории