Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
1. Mounting the lower clutch and the clutch felt (L). Align the notched section as shown below. Then place the clutch felt (L) so it fits securely. 2. Mount the CY-5 so it fits the lower clutch as shown below. 3. Place the clutch felt (S), and while applying some pressure, mount the upper clutch as shown. Afterwards, you can adjust the upper clutch to have the movement you desire. If it is too loose, double triggering may occur. Be sure the ROLAND logo is on the opposite side of the playing area. CY-5 Size: 10 inches Triggers: 2 (Bow, Edge) Dimensions: 246 (W) x 246 (D) x 45 (H) mm 9-11/16 (W) x 9-11/16 (D) x 1-13/16 (H) inches Weight: 380 g 14 oz (without attachment) Accessories: Attachment Set for Hi-Hat (Upper Clutch, Lower Clutch, Clutch Felt (L), Clutch Felt (S)) add * Continuous playing may cause dis-coloration of the pad, but this will not affect the Pad's function. CY-5 (Hi-Hat) Making the Settings Bow Portion Edge Portion Pad Face Output Jack Upper Clutch Clutch Felt (L) Lower Clutch Clutch Felt (S) Notch (Be sure to orient it correctly) Tighten the bolt with a tuning key. Specifications Projection (Be sure to orient it correctly) Tighten the bolt with a tuning key. Apply pressure CY-8 (Crash Cymbal/Ride Cymbal) Bow Portion Edge Portion Pad Face Output Jack CY-8 (Crash Cymbal/Ride Cymbal) Bow Portion Edge Portion Pad Face Output Jack Attaching the Cymbal Pad to a Stand 1. Use a tuning key to tighten the stopper bolt. The stopper keeps the cymbal pad from turning, and prevents the cables from catching or getting tangled on the stand. Stopper (Be sure to orient it correctly) Tighten the bolt with a tuning key. 2. Attach the CY-8 so the Roland logo is positioned on the opposite side of the playing area. 3. Tighten the wing nut to obtain the desired movement. Use the included felt washer and the wing nut. Wing Nut Felt Washer Double sounding may occur if the wing nut is loose. Playing the CY-8 Bow Shot This is the most common playing method, playing the pad face of the cymbal. It corresponds to the sound of the “head- side” of the connected trigger input. Bow Edge Shot This playing method involves striking the edge with the shoulder of the stick. It corresponds to the sound of the “rim- side” of the connected trigger input. * To make use of edge shot, you’ll need to connect to a trigger input jack on the percussion sound module that accommodates rim shots. Edge Choking Choking (pinching) the cymbal’s edge with the hand immediately after hitting the cymbal makes the sound stop. * To make use of choking play techniques, you’ll need to connect to a trigger input jack on the percussion sound module that accommodates rim shots. Specifications CY-8 Size: 12 inches Triggers: 2 (Bow, Edge) Dimensions: 290 (W) x 295 (D) x 47 (H) mm 11-7/16 (W) x 11-5/8 (D) x 1-7/8 (H) inches Weight: 650 g / 1 lb 7 oz Accessories: Wing Nut, Felt Washer, Stopper * Continuous playing may cause dis-coloration of the pad, but this will not affect the Pad's function. 11 USING THE UNIT SAFELY fig.FD-8.e • The tips of the anchor bolts are sharp. Handle with care. • When using on flooring, the anchor bolts may damage the floor. Do not attach the anchor bolts. • When the FD-8 is not going to be used for a long period of time, move and fix the arm, allowing longer travel for the pedal. • To avoid damage, do not leave the FD-8 for extended periods of time with the pedal plate depressed. Using the FD-8, you can control the opening and closing of the hi-hat sound. Open Hi-Hat Strike the hi-hat without pressing the pedal Half Open Hi-Hat Strike the hi-hat with the pedal pressed half-way Closed Hi-Hat Strike the hi-hat with the pedal pressed Foot Closed Completely press down the pedal Foot Open Press the pedal and then immediately release it The volume of the Foot Closed sound can be adjusted separately (TD-6V Owner’s Manual; p. 66). • Connect the FD-8 to the TD-6V before turning on the power. • Do NOT press the pedal when turning on the power. FD-8 Dimensions: 130 (W) x 396 (D) x 103 (H) mm 5-1/8 (W) x 15-5/8 (D) x 4-1/16 (H) inches Weight: 1.3 kg 2 lbs 14 oz Accessory: Tuning Key FD-8 (Hi-Hat Control Pedal) Anchor Bolt Pedal Plate Control Out Jack shallow deep Shift the Arm Adjusting the Travel of the Pedal Attaching the Anchor Bolts (When Using on the Carpet) Anchor Bolt Spring for the Anchor Bolt Loosen the nut with a tuning key. After adjusting, tighten the nut. Using the FD-8 Specifications 12 USING THE UNIT SAFELY fig.KD-8.e 1. Remove the screws attached to the reverse side of the KD-8’s trigger. fig.KD-Assy01 2. Pull out the stand in the direction indicated by the arrow until it is fully extended. fig.KD-Assy02 3. Use a tuning key to tighten the screws removed in Step 1 so that the stand is firmly secured. fig.KD-Assy03 4. Attach the kick pedal. Position the beater so that it strikes the center of the head, then secure the kick pedal and KD-8 firmly in place. fig.KD-Assy04.e Adjusting the Foot Plate Height Depending on your kick pedal,...
Эта инструкция также подходит к моделям:Музыкальные инструменты - TD-6KW (1.39 mb)