Войти:
Оценок - 4, средний балл: 4.5 ( )

Инструкция по эксплуатации Roland, модель Audio Processor SL-20

Производитель: Roland
Размер: 4.44 mb
Название файла: SL-20_OM.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good understanding of every feature provided by your new unit, this manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. Main Features . Continuously cuts input audio sounds and create a wide variety of slice patterns. . Includes a “HARMONIC” slice pattern that produces melodies from the chords you play. This feature provides you with a new way to express your musical ideas. . Includes a recording function. You can record up to forty seconds of the phrases you play, then play these back with loop playback. This lets you enjoy performing solos backed by your recorded phrases. . The SL-20 is equipped with a MIDI IN connector, allowing you to synchronize tempos with external MIDI devices. . The unit provides six different types of stereo effects, including three-dimensional sound field effects, which are available when the SL-20 is used in stereo output. . An expression pedal (optional) can be connected and used for hands-free control of the direct level, effects level, and other parameters. . The TEMPO indicator provides a clear confirmation of the current tempo, even on dimly lit stages. Copyright © 2008 BOSS CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of BOSS CORPORATION. Contents Contents 1 Panel Descriptions ....................3 Front Panel..........................................3 Rear Panel...........................................5 Installing Batteries....................6 Making the Connections ...........7 Mono Input Connection........................8 Stereo Input Connection......................9 Operating the SL-20 ...............10 Basic Operation.................................10 Panel Operation.................................11 Setting the Tempo.......................... 11 Switching the Slice Pattern ........... 11 Adjusting the Attack and Duty.... 11 Adjusting the Effect Level ............ 11 Adjusting the Direct Level............ 11 Switching the Output Mode......... 11 Switching the Pedal Mode............ 11 Using the TAP Pedal to Cue the Slice Pattern ................................12 Setting the Tempo with the TAP Pedal ............................12 Recording/Loop Playback..................13 Controlling Functions with an Expression Pedal ..................15 Setting the Function of the Expression Pedal............................ 15 Setting the Tempo Response When Slice Patterns Are Switched ....16 Setting the Output Mode....................17 Synchronizing Performances with External MIDI Devices................18 Setting the Retrigger Mode........... 19 Returning Settings to Their Factory Defaults..................... 20 Troubleshooting..................... 21 Setting Memo ........................ 22 Main Specifications ................ 24 MEMO ................................... 25 Printing Conventions and icons in This Manual Indicates information that you should be aware of when using the SL-20. Indicates supplementary information about an operation. Indicates information about a convenient operation. , (p.**) Indicates a reference page. 3 Front Panel Panel Descriptions BANK Knob Turn to switch the slice pattern variation. EFFECT LEVEL Knob Adjusts the volume of the effect sound. The volume of the effect sound increases as the knob is turned to the right. TEMPO Indicator This flashes in sync with the tempo. The indicator flashes red on the slice pattern’s first beat and green on the second, third, and fourth beats. TEMPO Knob This sets the tempo. Turn the knob to the right to increase the tempo, and to the left to slow the tempo down. You can adjust the tempo more precisely by turning the knob slowly. * You cannot set the tempo with the SL-20 while MIDI clock is being received. DUTY Knob Adjusts the duration of the slice pattern sound. The sound is played longer the further the knob is turned to the right. OUTPUT MODE Button This switches the output mode. * You can select the output mode only when connected for stereo output. MONO is selected when the SL-20 is connected in monaural. OUTPUT MODE List OUTPUT MODE Function MONO The same signal is output from both the OUTPUT R/MONO jack and the L jack. STEREO FIXED Output with fixed left and right positions. RANDOM The output randomly alternates between left, right, and center. PING-PONG The output bounces between the left and right channels. AUTO The location of the sound shifts smoothly between the left and right channels. (3D Cross) The location of the sound moves forward and back as well as left and right. (3D Panner) This produces a swirling, three-dimensional type of sound. ATTACK Knob Adjusts the volume of the slice pattern’s attack. The volume of the attack is boosted as the knob is turned to the right. DIRECT LEVEL Knob Adjusts the volume o...

Эта инструкция также подходит к моделям:
Музыкальные инструменты - SL-20 (4.44 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории