Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Use the sheet to check the point to drill. Make sure that the triangle mark on the wall bracket should be facing upwards. ,,Note 3. Remove the Wall bracket install guide. 4. Fix it with screws (not supplied) as shown in the illustration below. SCREEN Screw (8) & Wall Plug (8) NB5630A-NS.DDEULLK_ENG.indd 11 2013-10-23 9:14:45 12 Getting Started The order of installation wall mount bracket center screw A B C D 1. After inserting the C screw adjust the left and right center. 2. After ensuring the flatness insert B screw. 3. A, D screw fixation after inserting B, C screw. , Note The order of installation wall mount bracket side screw 1. Tightening the B screw. 2. Then, aligning the flatness tighten the A screw. 3. Confirmed the position of the screws after A, B screw loose while checking flatness. , Note A B Screen and wall-bracket position 1 Getting Started Hang the main unit onto the bracket as shown below. 5. Prefixed with bracket left / right guide according to screen side and bottom line. 6. Remove the wall bracket install guide. 7. Fix it with screws as shown in the illustration below. ............ 8. 2 Connecting 13 2 Connecting Connecting yy Do not install this unit upside down. It can damage the parts of this unit or be the cause of personal injury. yy Do not hang onto the installed unit and avoid any impact to the unit. yy Secure the unit firmly to the wall so that it does not fall off. If the unit falls off, it may result in an injury or damage to the product. yy When the unit is installed on a wall, please make sure that a child does not pull any of connecting cables, as it may cause it to fall. >>Caution Detach the unit from the bracket as shown below. ,,Note Connection and setting up Connecting the AC adapter Prior to installing the wall mount, first connect the cable. 1. Connect the supplied AC power cord to the AC adapter. 2. Connect the AC adapter cable to DC. IN adapter input. 3. Plug the AC power cord into an AC outlet. Only use the AC adapter supplied with this device. Do not use a power supply from another device or manufacturer. Using any other power cable or power supply may cause damage to the device and void your warranty. >>Caution OPTICAL In connection Connect the OPT. IN jack on the back of the unit to OPTICAL OUT jack on the Cinema beam TV using an OPTICAL cable. NB5630A-NS.DDEULLK_ENG.indd 13 2013-10-23 9:14:48 14 Connecting Pairing wireless subwoofer Setting up the wireless subwoofer for the first time 1. Connect the power cord of the wireless subwoofer to the outlet. The Yellow-green LED on the subwoofer starts to blink. 2. Turn on the main unit. The red LED on it starts to blink and then the main unit and the subwoofer will be automatically connected. Manually pairing wireless subwoofer When the connection has been failed between the main unit and the wireless subwoofer, the red LED on the subwoofer is turned on. To pair them, follow the steps below. 1. Press PAIRING on the back of the subwoofer. The Yellow-green LED on the wireless subwoofer starts to blink. 2. Press and hold ( Volume) on the unit and (Mute) on the remote control at the same time. 2 Connecting The green LED on the main unit starts to blink. When connection is completed, the Yellow 3. green LED on the subwoofer is turned on and After the Yellow-green LED on the subwoofer the green LED on the main unit is lit up for about 3 seconds. Information of the color LED indicators is turned on, press the buttons on step 2 again. The connection will be completed. State Sound bar LED Wireless subwoofer LED Standby Red Red Initial pairing Red (Blink) Yellow-green (Blink) Pairing Green (Blink) Yellow-green (Blink) Connected Green [Off Yellow-green Disconnected Off Yellow-green (Blink) [ Red yIf you operate main unit then wireless subwoofer sound within a few seconds in standby mode. ySet the distance between this unit and wireless subwoofer within 10 m. yOptimum performance can be implemented only when the unit and the Wireless subwoofer within distance of 2 m to 10 m is used since communication failure may occur if longer distance is used. yIt takes a few seconds (and may take longer) for the unit and subwoofer to communicate with each other. , Note 3 Operating Operating 15 Basic operations LG Sound Sync You can control some functions of this unit by your TV's remote control with LG Sound Sync. It is compatible with the LG TV that is supported LG Sound Sync. Make sure of the LG Sound Sync logo on your TV. Controllable function by LG TV's remote control : Volume up/down, mute. Refer to the TV's instruction manual for the details of LG Sound Sync. Make one of the following connections, depending on the capabilities of your equipment. yy You can also use the remote control of this unit while using LG Sound Sync. If you use TV's remote control again, the unit synchronizes with the TV. yy When the connections failed, make sure of the condition of the TV and power of it. yy Make sure of the condition of this unit and the connect...