Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
In such case, please check the connection status. yyTo prevent a malfunction, you are recommended to connect only one device to this unit. yyDon’t connect your smart device by using a cable to USB port. Or else the Blutooth connection will be disconnected. yyAfter connection of BT app, music may be output from your device. In this case, try connecting procedure again. ,,Note Using AirPlay Apple AirPlay technology enables you to play your iTunes music library, hosted on a Mac, PC, iPhone, iPod touch, or iPad on any AirPlay-enabled device connected to the Wi-Fi network. To stream audio wirelessly by AirPlay, you need : Wi-Fi Sharing Air Direct Webpage Compatible Apple Device iPad mini, iPad4, iPad3, iPad2, iPad, iPhone5, iPhone 4S, iPhone 4, iPhone 3GS, iPod touch 5G, iPod touch 4G, iPod touch 3G iOS Version Ver.4.3.3(or later) iTune Version Ver.10.2.2(or later) Wireless LAN (internal antenna) 802.11 b/g Security Mode WPA(TKIP/AES) WPA2(TKIP/AES) WEP with Open mode WEP with Open / Shared mode WPA(TKIP/AES) WPA2(TKIP/AES) WEP with Open mode Webpage address - 192.168.1.1 (Optional for security)) 192.168.1.111 yyThis unit should be connected to the same local network as your iTunes host device through the Wi-Fi router. yyDepending on the type of operating system or the application’s version and the setting status of AirPlay- enabled device connected to this unit, AirPlay may not be operated normally. yyDepending on the type of Network environment and your device state, it may take long time to connect the unit. yyWPA supports TKIP and WPA2 supports AES first. Connecting your Wi-Fi device to Wi-Fi network Option 1 : Using Wi-Fi Sharing Make sure that you set security mode to WPA- TKIP or WPA2-AES to connect the network more quickly. ,,Note 1. Connect your iPod touch/iPhone/iPad to the network. 2. Press FUNCTION on the remote control or F on the unit to select AIRPLAY function. 3. Connect your iPod touch/iPhone/iPad to the network first, then connect it to the unit using your cable. Please touch iPod touch/iPhone/ iPad before you use. 4. Press on the unit. “SET WIFI” message will appear and icon will blink. 5. Tap “Allow” from popup window from iPod touch/iPhone/iPad. Then network information will be shared to the unit. 6. When the unit is connected to the network, “CONN OK” message will appear and stop blinking. 7. Use AirPlay on your iPod touch/iPhone/iPad after “AIRPLAY” appears in the display window. Option 2 : Using Air Direct without security 1. Press FUNCTION on the remote control or F on the unit to select AIRPLAY function. 2. Press Air Direct/Reset on the unit. Then “DIRECT” message appears and icon blinks. -- When the unit is changed to Air Direct Mode, icon stops blinking. 3. In the network list, find and select “AIR DIRECT XXXXXX”. 4. Use Airplay after your iPod touch/iPhone/iPad or PC/MAC is connected. yyIf “LG AIR DIRECT XXXXXX” is not in the list, try to scan the available Wi-Fi networks again. yyWhen your iPod touch/iPhone/iPad or PC/MAC is connected to “LG AIR DIRECT XXXXXX” , you can’t use internet. ,,Note Using Air Direct with Security mode 5. Launch Apple Safari browser or Microsoft Internet Explorer browser on your iPod touch/ iPhone/iPad or PC/MAC. 6 Type in “192.168.1.1” at the browser address bar and confirm. 7. Set security mode and insert password. - Hexadecimal (0-9, A-F) 10 or 26 digits. - 5 or 13 ASCII characters. 8. Tap or click “OK”. 9. In the network list, find and select “AIR DIRECT XXXXXX” again. 10. If you want to get back to non-security mode, select security type as None. yyIf you want to deactivate Air Direct function, press Air Direct/Reset. yyIf you want to initializes Wi-Fi network’s Security Mode, press and hold Air Direct/Reset. yyIn case you can’t “LG AIR DIRECT XXXXXX” in the network list, try connecting procedure using Air Direct with Security mode. ,,Note Option 3 : Using Webpage The new Wi-Fi network created by this unit only allows access of one Wi-Fi enabled device. To avoid interference from any other Wi-Fi devices, you are recommended to temporarily disable the Wi-Fi function on your other Wi-Fi devices. • “LG AUDIO Setup XXXXXX” is the temporary and assistant Wi-Fi network for connection of this unit to your home Wi-Fi router. • While your iPod touch/iPhone/iPad or your Wi-Fi enabled PC/Mac is connecting to “LG AUDIO Setup XXXXXX” network, you can not be able to use the Internet on them. ,,Note 1. Press FUNCTION on the remote control or F on the unit to select AIRPLAY function. 2. Press and hold . --“STEP1” message appears and icon blinks in the display window. 3. After 20 seconds, select “Setting” -> “Wi-Fi” your iPod touch/iPhone/iPad or PC/MAC. 4. In the network list, select “ LG AUDIO Setup XXXXXX”. --“STEP2” message appears and icon blinks. yyIf “LG AUDIO Setup XXXXXX” is not in the list, try to scan the available Wi-Fi networks again. yyIf you want to deactivate Webpage function, press and hold until “AIRPLAY” message appears in the display window. ,,Note ...
Эта инструкция также подходит к моделям:Музыкальные центры - CM3430GDAB (2.11 mb)
Музыкальные центры - CM3430WDAB (2.11 mb)