Войти:
Оценок - 4, средний балл: 3.8 ( )

Инструкция по эксплуатации Sony, модель MHC-RG441

Производитель: Sony
Размер: 497.52 kb
Название файла:
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


You can then output audio through this system. C VIDEO OUT jack Use a video cable (not supplied) to connect the video input of TV to this jack. From the audio output of the VCR or MD deck VCR or MD deck continued 29GB Notes • The video game machine image may appear on the TV screen even if the system is turned off. • See “Selecting the surround effect” on page 23 for video game sound effects. • If you press GAME on the unit while the system is off, the system turns on, the function switches to GAME, and the equalizer also switches to GAME EQ. • If you press GAME on the unit while the system is on, the function switches to GAME and the equalizer automatically switches to GAME EQ in the same manner. Listening to audio from a connected component (MHC-RG555 only) Use buttons on the unit for the operation. Listening to a connected VCR 1 Connect the audio cords. See “Hooking up optional components” on page 29. 2 Press VIDEO/MD. Start playing the connected component. Listening to a connected MD deck 1 Connect the audio cords. See “Hooking up optional components” on page 29. 2 Press VIDEO/MD. Hold down VIDEO/MD and press ?/1. This switches the VIDEO function to MD. Once you enable the MD function, just press VIDEO/MD. Notes • If you cannot select “MD” when you press VIDEO/ MD, press ?/1 while holding down VIDEO/MD when the system is on. “VIDEO” will be switched to “MD”. To return to “VIDEO”, do the same procedure. • When you connect a VIDEO CD deck, set to “MD”. Transmitter (MHC-GX750 only) Hooking up the transmitter 1 Set the transmitter by the following procedures. Select either AUDIO IN A or AUDIO IN B hookup depending on the jack type of the optional component you want to connect the transmitter to. If noise occurs when the transmitter is connected to the headphones jack of your TV or VCR, set the NOISE FILTER switch on the transmitter to ON. Transmitter to AUDIO IN B jack Left channel (white) DC IN 9VOFF ON FILTERNOISE 12 3 CHANNEL R A AUDIO IN Right channel (red) Right channel (red) to AUDIO IN A jacks Left channel (white) Connecting cord (supplied) Unimatch plug adaptor (not supplied) to LINE OUT or REC OUT jack Optional Components (TV, VCR, Personal to headphones computer, etc.) (stereo phone jack) or LINE OUT jack (stereo mini jack) 30GB 2 Connect the transmitter to a wall outlet using the supplied AC power adaptor. The transmitter automatically turns on. to DC IN 9V jack Transmitter to wall outlet AC power adaptor (supplied: AC-GSX100) Notes • When you connect the transmitter to the analog out jacks, do not set the NOISE FILTER to ON. Otherwise, the volume will be limited. • The NOISE FILTER effects the sound only when you connect an optional component to the AUDIO IN A jacks of the transmitter. Connecting to the AUDIO IN B jack, the switch has no effect. • If stereo mini jack is connected to LINE OUT and the NOISE FILTER is set to ON, audio output will be reduced and audio signal may be intermittent or auto muting will activate. In this case, set the NOISE FILTER to OFF. • When the transmitter is placed on or near a TV, it may pick up a noise. In such case, place the transmitter away from the TV. • Do not place the transmitter near a fluorescent lamp, etc. when using the system. • Use only the supplied AC power adaptor. Do not use any other AC power adaptor. Polarity of the plug • If the connected component has the AVLS (Automatic Volume Limiter System) function, be sure to turn off the function when using the transmitter. Otherwise, you will have to turn up the volume of the speaker, and that may cause distortion. • If the connected component has the BASS BOOST or MEGA BASS function, be sure to turn off the function when using the transmitter. Otherwise, the sound from the speaker may be distorted. • If the transmitter does not detect an audio signal for a few minutes, the power on the transmitter automatically turns off. When the transmitter receives an audio signal again, the power automatically turns on. The effective areas of the transmitter Wireless system that allows you to use your system free from the restriction of speaker cords. The optimum signal reception range is up to approximately 30.5 m (100 feet) without the system picking up some interference. However, the distance may be reduced according to the surroundings and environment. If the system picks up some noise while using it within the above mentioned distance, reduce the distance between the transmitter unit and the main unit, or select another channel. Notes • When you use the main unit inside the effective areas of the transmitter, the transmitter can be placed in any direction from the listener. • Even within the signal reception area, there are some spots (dead spot) where the RF signal cannot be received. This is a characteristic inherent to RF signals, and does not indicate a malfunction. By slightly moving the transmitter, the location of the dead spot can be changed. Notes on receiving performance This system component utilizes...

Эта инструкция также подходит к моделям:
Музыкальные центры - MHC-GX250 (497.52 kb)
Музыкальные центры - MHC-GX450 (497.52 kb)
Музыкальные центры - MHC-GX750 (497.52 kb)
Музыкальные центры - MHC-RG555 (497.52 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории