Оценок - 3, средний балл: 4
(
)
)
|
Фото и характеристики Sony CHC-CL3 |
Фрагмент инструкции
2 Load a CD you want to record. 3 Press CD SYNC. The tape deck stands by for recording and the CD player pauses for play. When you want to record on the bottom side, press TAPE nN. 4 Press PLAY MODE/DIRECTION repeatedly until g appears to record on one side or h (or j) to record on both sides. 5 Press REC PAUSE/START. Recording starts. To stop recording Press x. Tips • When you record on both sides, be sure to start from the top side. If you start from the bottom side, recording stops at the end of the bottom side. • If you select both sides recording and the tape reaches the end of the top side part-way through a track, the entire track is recorded again from the beginning of the bottom side. • You can record only your favorite CD tracks with Program Play. After step 2, follow the same procedures as step 1 to 6 in “Programing CD tracks” on page 11. Then go to step 4. Selecting tape length automatically —Tape Select Edit You can check the most suitable tape length for recording a CD. Note that you cannot use Tape Select Edit for discs containing over 20 tracks. 1 Load a CD. 2 Press FUNCTION repeatedly to switch the function to CD. 3 Press EDIT. “EDIT” starts flashing. The required tape length for the currently selected CD appears, followed by the total playing time for side A and side B. Recording on a tape manually —Manual Recording You can record just the portions you like from a CD on a tape. You can also record a radio program. The recording level is automatically adjusted. 1 Load a blank tape. 2 Press FUNCTION repeatedly to select the desired source to record. 3 Press REC PAUSE/START. The tape deck stands by for recording. When you want to record on the bottom side, press TAPE nN. 4 Press PLAY MODE/DIRECTION repeatedly until g appears to record on one side or h (or j) to record on both sides. 5 Press REC PAUSE/START and then start playing the desired source to record. Tips • When you record on both sides, be sure to start from the top side. If you start from the bottom side, recording stops at the end of the bottom side. • If you select both sides recording and the tape reaches the end of the top side part-way through a track, the entire track is recorded again from the beginning of the bottom side. Timer recording radio programs To timer record, you must first preset the radio station (see “Presetting radio stations” on page 14) and set the clock (see “Setting the time” on page 8). 1 Tune in the preset radio station (see “Listening to the radio” on page 15). 2 Press CLOCK/TIMER SET on the remote. “DAILY SET ?” appears. 3 Turn ./> (or press . or > on the remote) to select “REC SET ?”, then press ENTER/YES on the remote. “ON” appears and the hour indication flashes. 4 Set the time to start recording. Turn ./> (or press . or > on the remote) to set the hour, then press ENTER/YES on the remote. The minute indication flashes. Turn ./> (or press . or > on the remote) to set the minute, then press ENTER/YES on the remote. 5 Set the time to stop recording following the procedure in step 4. continued Tape – Recording Sound Adjustment Sound Adjustment Timer recording radio programs (continued) 6 Insert a recordable tape. Recording starts from the top side. Insert a tape with the side you want to record on facing up. 7 Press ?/1 to turn off the system. To Do this Check the setting Press CLOCK/TIMER SELECT on the remote and turn ./> (or press . or > on the remote) to select “REC SELECT?”, then press ENTER/YES on the remote. Change the setting Start over from step 1. Cancel the timer Press CLOCK/TIMER SELECT on the remote and turn ./> (or press . or > on the remote) to select “TIMER OFF”, then press ENTER/YES on the remote. Notes • Do not operate the system from the time the system turns on until the recording starts (about 30 seconds before the preset time). • If the system is on about 30 seconds before the preset time, the timer-recording will not be activated. • The volume is reduced to minimum during recording. Adjusting the sound Enjoying the powerful sound —GROOVE You can listen to music with more powerful sound. Press GROOVE. “GROOVE” appears in the display and the volume switches to power mode (DBFB is also turned on). Press again to cancel GROOVE. DBFB is also canceled. Tip GROOVE is factory set to on. Reinforcing the bass sound —DBFB You can listen to music with stronger bass tones. Press DBFB*. “DBFB” appears in the display and the bass is reinforced. Press again to cancel DBFB. * DBFB: Dynamic Bass Feedback Tip DBFB is factory set to on. Selecting the surround effect Press SURROUND on the remote. “SURROUND” appears in the display. Press again to cancel SURROUND. Adjusting the bass 1 Press BASS/TREBLE. 2 Press m or M repeatedly to adjust the bass. You can adjust the bass in 7 steps (from –3 to +3). Adjusting the treble 1 Press BASS/TREBLE twice. 2 Press m or M repeatedly to adjust the treble. You can adjust the treble in 7 steps (from –3 to +3). Tip You can enjoy the original sound by setting BASS and T...
Эта инструкция также подходит к моделям:Музыкальные центры - CHC-CL1 (271.97 kb)