Оценок - 1, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
For manual tuning, press + or – (or TUNING +/– on the remote) repeatedly. For automatic tuning, press and hold + or – (or TUNING +/– on the remote). Tips • You can switch from another source to the radio just by pressing TUNER/BAND (Automatic Source Selection). • When an FM program is noisy, press STEREO/MONO so that “MONO” appears in the display. There will be no stereo effect, but the reception will improve. Press the button again to restore the stereo effect. • To improve broadcast reception, adjust the supplied antennas. Recording from the radio You can record the radio program on a tape by calling up a preset station. You can use a TYPE I (normal) tape. ?/1 (Power) +/– 53 Basic Operationsx hH 12 46 1 Press A and insert a recordable tape into deck B. With the side you want to record facing forward 2 Press TUNER/BAND to select the band you want. continued Recording from the radio (continued) 3 Turn the shuttle until it clicks to tune in a preset station. Turn counter- Turn clockwise clockwise for for higher lower preset preset numbers. numbers. Preset number Frequency VOLUME MHz kHzALL DISCS § 4 Press REC. Deck B stands by to record in the direction of the indicator on hH (the right indicator lights to record on the forward side and the left indicator lights to record on the reverse side). 5 Press DIRECTION repeatedly to select G to record on one side. Select j (or RELAY) to record on both sides. 6 Press REC PAUSE. Recording starts. To stop recording Press x. Tips • If you want to record from the reverse side, press TAPE A/B repeatedly to select deck B after step 1. Press hH to start playback of the reverse side, then press x where you want to start recording. • When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side. • To record non-preset stations, use + and – in step 3 to tune in the desired station manually. • If noise is heard while recording from the radio, move the respective antenna to reduce the noise. Playing a tape You can use a TYPE I (normal) tape. You can also use ./> to quickly search for songs you want to hear (AMS* function). To select either deck A or B, press TAPE A/B repeatedly. * AMS (Automatic Music Sensor) 4 x X VOLUME . > 12 3 2 ?/1 (Power) Shuttle X nN x . > TAPE A/B m M VOL +/– 1 Press TAPE A/B. To select deck A or B, press TAPE A/B repeatedly. 2 Press A and insert a recorded tape in deck A or B. With the side you want to play facing forward 3 Press DIRECTION repeatedly to select g to play one side. Select j to play both sides. To play both decks in succession, select RELAY (Relay Play)*. 4 Press hH. Press hH again to play the reverse side. The tape starts playing. * Relay Play always follows the following sequence: tDeck A (front side) tDeck A (reverse side) Deck B (reverse side) TDeck B (front side) T To Do this Stop playback Press x. Pause Press X. Press again to resume playback. Fast-forward Rewind Remove the cassette Turn the shuttle clockwise until it clicks while playing the front side or counterclockwise until it clicks while playing the reverse side (or press M or m on the remote). Turn the shuttle counterclockwise until it clicks while playing the front side or clockwise until it clicks while playing the reverse side (or press m or M on the remote). Press A. Adjust the volume Turn VOLUME (or press VOL +/– on the remote). Searching for the beginning of the current or the next track (AMS*) To go forward Press > during playback when the right indicator on hH lights. “TAPE A (or TAPE B) >>> +1” appears. Press . during playback when the left indicator on hH lights. “TAPE A (or TAPE B) <<< +1” appears. To go back Press . during playback when the right indicator on hH lights. “TAPE A (or TAPE B) <<< –1” appears. Press > during playback when the left indicator on hH lights. “TAPE A (or TAPE B) >>> –1” appears. * Automatic Music Sensor Notes • The deck stops automatically after repeating the sequence five times. • The AMS function may not operate correctly under the following circumstances: – When the unrecorded space between songs is less than 4 seconds long. – If completely different information is recorded on the left and right channels. – When there are continuous sections of extremely low level or low frequency sound (like those of a baritone sax). – When the unit is placed near a television. (In this case, we recommend moving the unit farther away from the television or turning off the television.) Basic Operations Recording from a tape You can use a TYPE I (normal) tape. ?/1 (Power) 5 x 2 143 2 1 Press TAPE A/B repeatedly to select deck A. 2 Press A and insert a recorded tape in deck A and a recordable tape in deck B. With the side you want to play/record facing forward 3 Press REC. Deck B stands by to record in the direction of the indicator on hH (the right indicator lights to record on the forward side and the left indicator lights to record on the reverse side). 4 Press RE...
Эта инструкция также подходит к моделям:Музыкальные центры - MHC-DX6AV (659.33 kb)