Оценок - 3, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Repeat Play starts. Do the following procedure to change the repeat mode. To repeat Press All the tracks on PLAY MODE repeatedly the current CD until “1 DISC” appears up to five times in the display. All the tracks on PLAY MODE repeatedly all CDs up to five until “ALL DISCS” times*1 appears in the display. Only one track*2 REPEAT repeatedly until “REPEAT 1” appears in the display while playing the track you want to repeat. To cancel Repeat Play Press REPEAT repeatedly until “REPEAT” or “REPEAT 1” disappears from the display. *1 You cannot use this function during Shuffle Play. *2 The track is repeated until x is pressed to stop playback. Playing the CD tracks in random order –– Shuffle Play You can play all the tracks on one CD or all CDs in random order. ?/1 > (Power) 32 DISC 1~3 1 1 Press CD, then place a CD. 2 Press PLAY MODE repeatedly until “1 DISC SHUFFLE” or “ALL DISCS SHUFFLE” appears in the display. “ALL DISCS SHUFFLE” shuffles all the CDs in the player. “1 DISC SHUFFLE” shuffles tracks on the CD whose disc number is lit. 3 Press hH. All the tracks play in random order. To cancel Shuffle Play Press PLAY MODE repeatedly until “SHUFFLE” or “PROGRAM” disappears from the display. The tracks continue playing in their original order. To select a desired CD Press DISC 1~3. Tips • You can start Shuffle Play during Normal Play by pressing PLAY MODE repeatedly to select “SHUFFLE”. • To skip a track, press >. Programming the CD tracks –– Program Play You can make a program of up to 32 tracks from all the CDs in the order you want them to be played. ?/1 (Power) 4 p 74 2 5 31 . nN X x m M > nN x . > CLEAR CHECK CD 1 Press CD, then place a CD. 2 Press PLAY MODE repeatedly until “PROGRAM” appears in the display. 3 Press one of the DISC 1~3 buttons to select a CD. 4 Press . or > until the desired track appears in the display. Total playing time Disc number (including selected track) SHUFFLE REPEAT 1 ALL 1 DISCS PROGRAM STEP VOLUME SYNC § Track number 5 Press ENTER. The track is programmed. The program step number appears, followed by the total playing time. 6 To program additional tracks, repeat steps 3 to 5. Skip step 3 to select tracks from the same disc. 7 Press hH. All the tracks play in the order you selected. continued Programming the CD tracks (continued) To cancel Program Play Press PLAY MODE repeatedly until “PROGRAM” or “SHUFFLE” disappears from the display. To Press Check the CHECK on the remote program repeatedly. After the last track, “CHECK END” appears. Clear a track from CLEAR on the remote in the end stop mode. Clear a specific CHECK on the remote track repeatedly until the number of the track to be erased appears, then press CLEAR. Add a track to the 1 Select the disc tray with a program DISC 1~3 button. 2 Select the track by pressing ./>. 3 Press ENTER. Clear the entire x once in stop mode or program twice during playback. Tips • The program you made remains in the system’s memory even after it has been played back. Press CD, then press hH to play the same program again. • If “--.--” appears instead of the total playing time during programming, this means: – you have programmed a track number which exceeds 20. – the total playing time has exceeded 100 minutes. 22 The Tape Deck The Tape Deck 4 Press DIRECTION repeatedly to Recording on a tape select g to record on one side. manually Select j (or RELAY) to record on both sides. You can record from CD, tape, or radio as you like. For example, you can record just the 5 Press REC PAUSE. songs you want or record from the middle of Recording starts. the tape. 6 Press hH to start playing the source to be recorded. x ./> 4?/1 (Power) 6 To Press Stop recording x. Pause recording REC PAUSE. Tips • If you want to record from the reverse side, press TAPE A/B repeatedly to select deck B after step 1. Press hH to start playback of the reverse side, then press x where you want to start recording. • When recording from a CD, you can use . or > to select tracks during rec pause mode (after pressing REC in step 3 and before pressing REC PAUSE in step 5). 2 531 1 Insert a recordable tape into deck B. 2 Press the function button of the source you want to record (e.g., CD). When you want to record from TAPE A, press TAPE A/B repeatedly until TAPE A is selected. 3 Press REC. Deck B stands by to record in the direction of the indicator on hH (the right indicator lights to record on the forward side and the left indicator lights to record on the reverse side). Recording a CD by specifying track order — Program Edit You can record tracks from all the CDs in the order you want. When programming, make sure the playing times for each side do not exceed the length of one side of the tape. ?/1 5 5 3,9 (Power) p 1246 10 1 8 . nN X x m M > CHECK 1 Place a CD and insert a recordable tape into deck B. 2 Press CD. 3 Press PLAY MODE repeatedly until “PROGRAM” appears in the display. 4 Press one of the DISC 1~3 buttons to select a CD. 5 Press . or > until the desired track appears i...
Эта инструкция также подходит к моделям:Музыкальные центры - MHC-BX2 (507.01 kb)