Оценок - 5, средний балл: 4
(
)
)
|
Фото и характеристики Sony CMT-Z100DIR |
Фрагмент инструкции
* When playing a VBR (variable bit rate) MP3 file, the system may resume playback from a different point. You can listen to music stored in the USB device. The audio formats that can be played back by this system are as follows: MP3*/WMA*/AAC* * Files with copyright protection (Digital Rights Management) cannot be played back by this system. 3 Start playback. Press . (or .. on the unit). Other operations To Press Pause playback . (or .. on the unit). To resume playback, press the button again. Stop playback .. To resume playback, press . (or .. on the unit)*. To cancel resume playback, press . again. +/. repeatedly. ./.. Hold down ./. during playback, and release the button at the desired point. REPEAT repeatedly until “REP” or “REP1” To change the play mode Press PLAY MODE repeatedly while the USB device is stopped. You can select normal play (“ ” for all files in the folder on the USB device), shuffle play (“SHUF” or “ SHUF”), or program play (“PGM”). GB Note on shuffle play mode Note on shuffle play mode SHUF”) is cleared and the play mode returns to normal play mode (“ ”). Notes .The following USB device/situations can increase the time it takes to start playback: . a USB device recorded with a complicated tree structure. . the memory capacity is excessive. .The system can playback to a depth of 8 folders only. .Resume play is cancelled when you turn off the system or change the function. .This system does not necessarily support all the functions provided in a connected USB device. .The playback order for the system may differ from the order of the connected USB device. .Folders that have no audio files are skipped. .The file formats that this system can play are as follows: . MP3: file extension “.mp3” . WMA: file extension “.wma” . AAC: file extension “.m4a” . MP4: file extension “.3gp” or “.mp4” Note that even when file names have the above file extensions, if the actual files differ, playing these files may generate a loud noise which could damage the speaker system and the system may malfunction. Creating your own program (Program Play) Use buttons on the remote to create your own program. 1 Select the desired function. CD Press FUNCTION +/. repeatedly to select the CD function. USB Press FUNCTION +/. repeatedly to select the USB function. 2 Select the play mode. Press PLAY MODE repeatedly until “PGM” appears while the system is stopped. 3 Select the desired track or file number. Press ./. repeatedly until the desired track or file number appears. When programming MP3 files, press +/. repeatedly to select the desired folder, and then select the desired file. Selected track or Total playing time file number of the selected track or file Operations Continued . GB 4 4 Press ENTER to enter the selected track or file. CD “.....” appears when the total program time exceeds 100 minutes for a CD, or when you select an MP3 file. USB The total program time cannot be displayed, so “.....” appears. 5 Repeat steps 3 through 4 to program additional tracks or files, up to a total of 25 tracks or files. 6 To play your program of tracks or files, press .. The program remains available until you remove the disc or the USB device. To play the same program again, press .. To cancel Program Play Press PLAY MODE repeatedly until “PGM” disappears while the system is stopped. To delete the last track or file of the program Press CLEAR while the system is stopped. To view program information, such as total track number of the program Press DISPLAY repeatedly. 0GB Using optional audio Adjusting the sound components 1 Prepare the sound source. Connect additional audio component to the AUDIO IN jack on the unit using an audio analog cord (not supplied). 2 Turn down the volume. Press VOLUME .. 3 Select the AUDIO function. Press FUNCTION +/. repeatedly. 4 Start playback. Start playback of the connected component and adjust its volume. 5 Adjust the volume. Press VOLUME +/.. To Press Generate a more DSGX. dynamic sound (Dynamic Sound Generator X-tra) Set the sound EQ repeatedly to effect select “BASS” or “TREBLE,” and then press +/. repeatedly to adjust the level. Operations 1GB Turning off the beep sound Turning off the beep sound e system. “BEEP ON” is set by default. Use buttons on the unit to perform the following procedure. 1 Turn on the system. Press .... 2 Hold down ., then press DISPLAY MODE until “BEEP OFF” appears. To turn on the beep sound Repeat the procedure, until “BEEP ON” appears. Changing the display To Press Change DISPLAY repeatedly information on when the system the display1) is on. Check the clock DISPLAY when the when the system system is off2). The is off clock is displayed for 8 seconds. 1) For example, you can view disc information or the USB device information, such as; .track or file number during normal play. .track or file name (“ ”) during normal play. .artist name (“ ”) during normal play. .album or folder name (“ ”) during normal play. .total playing time while the player is stopped. You can also ...
Эта инструкция также подходит к моделям:Музыкальные центры - CMT-Z100IR (409.7 kb)