Оценок - 6, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Flashing part of a CD — Flash With the flash function, you can “flash” the CD sound during playback. This lets you create original recordings. (Power) FLASH Jog dial /Press and hold FLASH during playback at the point you want to start the Flash function, and release to resume normal play. To adjust the flash length Turn the jog dial while holding FLASH (or press SELECT >or .while holding FLASH on the remote) to select different flash lengths (FLASH 1~20). To use LOOP and FLASH together Press and hold both LOOP and FLASH at the same time. Notes • The loop and flash length cannot be adjusted during this operation. Adjust the loop and flash lengths independently beforehand if necessary. • To record the flash effect, use the analog (MD OUT) connections or this unit’s tape deck. Using the drum pads With the drum pads, you can add percussion during playback. This effect can be used with any source, to create original recordings. BEAT (Power) LEVEL Jog dial PAD A PAD B /Tap drum PAD A or B to produce the respective sound. To change the drum sound Turn the jog dial while holding PAD A or B (or press SELECT >or .while holding PAD A or B on the remote) to select the sound you desire. You can select from a variety of different drum sounds. The name of the drum sound appears in the display. nKICK . SNARE A . A . The sound you select will be stored in pad A or B. To create a drum roll Hold down both PAD A and B on the front panel. “CHAIN” appears in the display and you hear the sound of both pads. Turn the jog dial counterclockwise for PAD A or clockwise for PAD B. To adjust the volume of the pads Press BEAT LEVEL repeatedly to select the level you desire. Each time you press the button, the level changes as follows: nLEVEL 1 µ LEVEL 2 µ LEVEL 3 µ PAD A LEVEL MAX PAD B SPEED ?// SELECT >/. Using the beat functions With the beat functions, you can enjoy a variety of rhythms. They can be used with any source, to create original recordings. BEAT BEAT (Power) Jog dial SELECT SPEED /Press BEAT ON/OFF during playback at the point you want to start the beat. The button’s indicator lights up. To change the speed Turn the jog dial while holding BEAT SPEED (or press SPEED ?or /on the remote) to select the speed you desire (BPM 40~200). To change the beat pattern Turn the jog dial while holding BEAT SELECT (or press SELECT >or .on the remote) to select the pattern you desire. The name of the beat pattern appears in the display. n8 BEAT 1 . 8 BEAT 2 . . BEAT JAM AUTO BPM BEAT ON/OFF BEAT LEVEL A . A . BEAT ON/OFF nMIXED BEAT* * When you purchased this unit, a simple beat had been stored at this setting.Your original beat is stored in this when you create the original beat using the BEAT MIX function (see “Using the BEAT MIX function” on page 30). To cancel the beat Press BEAT ON/OFF. Make sure the button’s indicator turns off. To change the beat volume Press BEAT LEVEL repeatedly to select the level you desire. Each time you press the button the level changes as follows: nLEVEL 1 µ LEVEL 2 µ LEVEL 3 µ LEVEL MAX SPEED ?// Tips • You can use the drum pads and the beat function together. SELECT >/. • Press BEAT JAM while holding BEAT SPEED to hear all drum sounds and beat patterns played repeatedly when the power is on. Press any key (except BEAT LEVEL) to stop. Using the BEAT JAM function This function automatically synchronizes the sounds of PAD A and B with the sound source. 1 Start playing a source. 2 Press BEAT JAM repeatedly to select the jam mode you desire. The button’s indicator lights up. Every time you press the button, the display changes as follows: nPAD MODE µ RANDOM MODE µ GUIDANCE MODE µ JAM OFF PAD MODE This mode emphasizes the rhythm of the source by playing the sound stored at PAD A in sync with the bass and playing the sound stored at PAD B in sync with the treble. RANDOM MODE This mode emphasizes the rhythm of the source by playing random sounds (from the drum pad library) in sync with source. GUIDANCE MODE In this mode, you can join the music. Tap PAD A when the indicator around PAD A lights up (in sync with bass) and tap PAD B when the indicator around PAD B lights up (in sync with treble). You get a point if you tap correctly, or you lose your point if you tap uncorrectly. The number of beats and the points are shown in the display. This mode can be canceled when BEAT JAM is pressed or after several seconds of silence, or the play of the current track is finished. Note BEAT JAM cannot be used at the same time as the BEAT (BEAT ON) function. When BEAT JAM is turned ON, BEAT turns OFF automatically. Likewise, when the BEAT is turned ON, BEAT JAM turns OFF automatically. Using the AUTO BPM function This function automatically synchronizes the rhythm of the current beat pattern with the sound source. 1 Start playing a source. 2 Select a beat pattern. (See “To change the beat pattern” on page 28.) 3 Press BEAT ON/OFF to stop the beat function. 4 Press AUTO BPM. The button’s indicator blinks orange while measuring th...
Эта инструкция также подходит к моделям:Музыкальные центры - MHC-GRX80 (787.91 kb)
Музыкальные центры - MHC-GRX80J (787.91 kb)
Музыкальные центры - MHC-R880 (787.91 kb)
Музыкальные центры - MHC-RXD8 (787.91 kb)