Оценок - 2, средний балл: 4.5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
• To record with surround effect, press DSP (or DSP MODE on the remote) so “SUR ” appears in the display. The equalizer settings will not be recorded. • If noise is heard while recording from the radio, move the appropriate antenna to reduce the noise. Playing a tape You can play any type of tape, TYPE I (normal), TYPE II (CrO2) or TYPE IV (metal). The deck automatically detects the tape type. To select either deck A or B, press DECK A »aor DECK B »aon the remote. 1/u 0/ 0/ (Power) 3 ) VOLUME 3 ) Basic Operations p DOLBY NR pP 21 1 DECK A »· DECK B »· p P 0/) VOLUME +/– continued Playing a tape (continued) 1 Press 6EJECT and insert a recorded tape in deck A or B. With the side you want to play facing forward »» 6Pr0) 6 »» p0)p 2 Press DIRECTION repeatedly to select Ato play one side, §* to play both sides, or RELAY (Relay Play)** to play both decks in succession. 3 Press a. Press »to play the reverse side. The tape starts playing. * The deck stops automatically after playing both sides five times. ** Relay Play always plays according to the following sequence: Deck A (front side), Deck A (reverse side), Deck B (front side), Deck B (reverse side). To Do this Stop play Press p. Pause (Deck B only) Press P. Press again to resume play. Fast-forward Press )while playing the front side or 0while playing the reverse side. Rewind Press 0while playing the front side or )while playing the reverse side. Remove the cassette Press 6EJECT. Adjust the volume Turn VOLUME (or press VOLUME +/– on the remote). Tips • Pressing aor » while the system is off automatically turns on the system and starts tape playback if there is a tape in the deck (One Touch Play). • You can switch from another source to the tape deck just by pressing aor »(Automatic Source Selection). • When you want to reduce the hiss noise in low- level high-frequency signals, press DOLBY NR so “DOLBY NR B” appears in the display. Recording from a tape — High-speed Dubbing You can use TYPE I (normal) or TYPE II (CrO2) tapes. The recording level is automatically adjusted. 1/u (Power) p 31 412 1 Press 6EJECT and insert a recorded tape in deck A and a blank tape in deck B. With the side you want to play/record on facing forward »» 6Pr0) 6 »» p0)p 2 Press H SPEED DUB. Deck B stands by for recording. 3 Press DIRECTION repeatedly to select Ato record on one side or § to record on both sides. 4 Press P. Dubbing starts. When dubbing ends, decks A and B automatically stop. To stop dubbing Press pon deck A or B. Tips • When you dub on both sides, start recording from the front side. If you start from the reverse side, recording stops at the end of the reverse side. • You don’t have to set DOLBY NR, since the tape in deck B is automatically recorded in the same state as the tape in deck A. Notes • If you set DIRECTION to §when the tapes you use have different lengths, the tape in each deck reverses independently. If you want to start dubbing from the same point for the other side, set DIRECTION to Aand reverse tapes manually after both decks stop. Then press H SPEED DUB again to start recording the other side. • You cannot record the surround effect. Basic Operations The CD Player Using the CD display You can check the remaining time of the current track or the whole CD. DISPLAY/DEMO /Press DISPLAY/DEMO during playback. Playing CD tracks repeatedly — Repeat Play This function lets you repeat a single CD or all CDs in Normal Play, Shuffle Play, and Program Play. 1/ALL DISCS REPEAT Each time you press this button in Normal Play, the display changes as /Press REPEAT repeatedly during follows: playback until “REPEAT” appears in the display. nElapsed time on the current track Repeat Play starts. The following table n describes the various repeat modes. Remaining time on the current track n Remaining time on the current CD (1 DISC To repeat Press All the tracks on 1/ALL DISCS repeatedly mode) or “PLAY” (ALL DISCS mode) n the current CD until “1 DISC” appears in the display. All the tracks on 1/ALL DISCS repeatedly Clock display (for a few seconds) n Effect (P FILE) name or “EFFECT ON all CDs until “ALL DISCS” appears in the display. (OFF)” To check the total playing time and the number of tracks on a CD Press DISPLAY/DEMO in stop mode. If you press DISPLAY/DEMO again, the clock display appears for a few seconds then the display returns to the previous indication. Only one track* REPEAT repeatedly while playing the track you want to repeat until “REPEAT 1” appears in the display. * You can’t repeat a single track during Shuffle Play and Program Play. To cancel Repeat Play Press REPEAT repeatedly until “REPEAT” or “REPEAT 1” disappears from the display. Playing CD tracks in random order — Shuffle Play You can play all the tracks on one CD or all the CDs in random order. 1 DIRECT PLAY Jog dial 43 2 1 Press FUNCTION repeatedly until “CD” appears in the display. 2 Press PLAY MODE repeatedly until “SHUFFLE” appears in the display. 3 Press 1/ALL DISCS to choose “1 DISC” or “ALL DISCS...
Эта инструкция также подходит к моделям:Музыкальные центры - LBT-D890AV (851.97 kb)
Музыкальные центры - LBT-XB55AV (851.97 kb)
Музыкальные центры - LBT-XB80AV (851.97 kb)
Музыкальные центры - LBT-XB88AV (851.97 kb)