Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
(Power) CONTINUE REPEAT /Press REPEAT during playback until “REPEAT” appears in the display. Repeat Play starts. Do the following procedure to change the repeat mode. To repeat Press All the tracks on CONTINUE repeatedly the current CD until “1 DISC” appears in the display. All the tracks on CONTINUE repeatedly all all CDs until “ALL DISCS” appears in the display. Only one track REPEAT repeatedly until “REPEAT 1” appears in the display while playing the track you want to repeat. To cancel Repeat Play Press REPEAT repeatedly so that “REPEAT OFF” appears in display. Playing the CD tracks in random order –– Shuffle Play You can play all the tracks on one CD or all CDs in random order. (Power) 4 12 CONTINUE 3 1 Press FUNCTION repeatedly until “CD” appears in the display, then place a CD. 2 Press SHUFFLE repeatedly to light the SHUFFLE indicator and select “1 DISC” or “ALL DISCS”. “ALL DISCS” shuffles all the CDs in the player. “1 DISC” shuffles only one CD. 3 When you want to specify the disc for “1 DISC” Shuffle Play, turn the jog dial until the desired disc number or Disc Memo (see page 33) appears. 4 Press ENTER or CD (P. “J” appears and then all the tracks play in random order. To cancel Shuffle Play Press CONTINUE. Tips • You can start Shuffle Play by pressing SHUFFLE while playing. • To skip a track, press )/+ on the front panel (or + on the remote). • You can specify another disc during 1 DISC Shuffle Play. Turn the jog dial to specify the next disc. After all the tracks on the current disc are played in random order, the next disc starts playing. To skip to the next disc right away, press ENTER while playing the current disc. You cannot specify the next disc to play during ALL DISCS Shuffle Play. Note Even if you press p or turn off the power during ALL DISCS Shuffle Play, the player remembers which discs/tracks were played and which were not. Therefore, if you want to start ALL DISCS Shuffle Play again from the beginning, be sure to repeat the procedure from Step 1. Programming the CD tracks –– Program Play You can make a program containing up to 32 “steps”, each “step” may contain either an individual track or an entire disc. The program is stored automatically. 4 Press =/0 or )/+ until the desired track number appears. When the disc you select has Disc Memo, it appears and then switches to the following display. PROGRAM NEXT DISC TRACK STEP VOLUME Track number (Power) 34 712 CONTINUECLEARCHECK 5 5 Press ENTER to program the track. The programmed track and corresponding step (playing order) appear in the display. Programmed track PROGRAM DISC TRACK STEP NEXT VOLUME Programmed disc Playing order 6 Program additional discs or tracks. To program Repeat Steps Other discs 3 and 5 Other tracks on the same disc 4 and 5 Other tracks on other discs 3 to 5 7 Press CD (P. All the tracks play in the order you selected. 1 Press FUNCTION repeatedly until To exit the program mode “CD” appears in the display. Press CONTINUE. 2 Press PROGRAM. 3 Turn the jog dial until the desired disc number or Disc Memo appears. To program the whole disc, make sure “AL” is displayed below the TRACK indicator and skip to step 5. PROGRAM DISC NEXT VOLUME Disc number To You need to Check the Press CHECK repeatedly. program After the last track, “-END-” appears. Clear a specific Press CHECK until the track track or disc or disc you do not want appears, then press CLEAR. Clear from the Press CLEAR. Each time you last track or disc press the button, the last track or disc will be cleared. Clear the entire Press and hold CLEAR until program “CLEAR” is displayed. Add tracks or Follow the programming discs to the end procedure. of the program Tips • When you press CD (P, you can play the same program again. • When you press PROGRAM during Continuous or Shuffle Play, the program will be played after the current track. • If you replace discs, the programmed disc and track numbers remain until you erase them. So, the player plays only the existing disc and track numbers. However, the disc and track numbers that are not found in the player or on the disc are deleted from the program, and the rest of the program is played in the programmed order. Playing your favorite CD independently — Plus One Play When you insert a disc into the PLUS ONE slot, you can play the disc independently from other discs. When using this function, the player is automatically set to the 1 DISC play mode. (Power) 213 1 Press FUNCTION repeatedly until “CD” appears in the display. 2 Open the front cover. 3 Press PLUS ONE. The indicator on the PLUS ONE button lights up and “PLUS ONE” appears. 1 DISC PLUS ONE DISC NEXT VOLUME continued Playing your favorite CD independently (continued) The PLUS ONE slot comes to the loading position. PLUS ONE slot PLUS ONE 1 2 3 4 5 6 7 8 9 5049484746 45 4 Insert a disc into the PLUS ONE slot. 5 Close the front cover. The player starts playing the disc in the PLUS ONE slot. Tips • To play a disc already inserted into the PLUS ONE slot, press...
Эта инструкция также подходит к моделям:Музыкальные центры - MHC-F150 (1.09 mb)
Музыкальные центры - MHC-F250AV (1.09 mb)