Войти:
Оценок - 4, средний балл: 4.3 ( )

Инструкция по эксплуатации Sony, модель LBT-XB33K

Производитель: Sony
Размер: 835.59 kb
Название файла:
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


Pause Press P. Press again to resume playback. Select a track During playback or pause, turn the jog dial clockwise (to go forward) or counterclockwise (to go backward) and release it when you reach the desired track. Or press AMS* + (to go forward) or AMS* = (to go backward) on the remote. Find a point in Press and hold ) or 0 during a track playback, and release at the desired point. Select a CD Press one of the DIRECT PLAY buttons (or DISC SKIP). Play only the Press 1/ALL DISCS repeatedly CD you have until “1 DISC” appears. selected Play all CDs Press 1/ALL DISCS repeatedly until “ALL DISCS” appears. Remove or Press 6OPEN. change the CDs Adjust the Turn VOLUME (or press volume VOLUME +/– on the remote). * AMS: Automatic Music Sensor. Tips • Pressing a while the system power is off automatically turns on the system and starts CD playback if there is a CD on the tray (One Touch Play). • You can switch from another source to the CD player and start playing a CD just by pressing · or one of the DIRECT PLAY buttons (Automatic Source Selection). • If there is no CD in the player, “NO DISC” appears in the display. • You can change the CD in the loading position during playback. 12 Recording a CD — CD Synchro Recording This function lets you record from a CD to a tape easily. You can use TYPE I (normal) or TYPE II (CrO2) tapes. The recording level is adjusted automatically. 1/u (Power) SURROUND 7 p. 5 DOLBY NR p 6 324 1 1 Press 6EJECT and insert a blank tape into deck B. With the side you want to record on facing forward »» 6Pr0) 6 »» p0)p 2 Press 6OPEN and place a CD. With the label side up. When you play a CD single, place it on the inner circle of the tray. »» 6Pr0) 6 » Pp »» p60)p)0 3 Close the front cover. 4 Press DISC SKIP repeatedly until the disc number you want to record appears in the playing position indicator. 5 Press CD SYNC. Deck B stands by for recording and the CD player stands by for playback, and the indicator on the a button (for the front side) lights up green. 6 Press DIRECTION repeatedly to select Ato record on one side or §(or RELAY) to record on both sides. 7 Press P on deck B. Recording starts. To stop recording Press pon deck B or on the CD player. Tips • If you want to record on the reverse side, press . so the indicator on the »button (for the reverse side) lights up green. • When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side. • When you want to reduce the hiss noise in low- level high-frequency signals, press DOLBY NR before step 7 so “DOLBY NR B” appears in the display. • To record with the surround effect, press SURROUND so “SUR ” appears in the display. The equalizer settings will not be recorded. Note You cannot listen to other sources while recording. Basic Operations 2 Press TUNING MODE repeatedly Listening to the until “PRESET” appears in the radio display. MANUAL nAUTO nPRESET n — Preset Tuning Before using this function, preset radio stations in the tuner’s memory (see “Step 3: Presetting radio stations”). 3 Press TUNING +/– (or PRESET +/– on the remote) to tune in the desired preset station. 123VOLUME(Power) STEREO/MONO 1/u LBT-D390/D790/G5500/XB33/XB33K/XB44/ XB44K/XB50/XB60 Preset number DOLBY NR OFF TUNED STEREO PRESET ALL DISC S MHz Frequency LBT-XB66/XB66K/XB660 Preset number PRESET +/– TUNER/BAND VOLUME +/– 1 Press TUNER/BAND repeatedly until the band you want appears in the display. Each time you press this button, the band changes as follows: 2 band model: FM .AM 3 band model: FM nMW nLW DISCALL DOLBY NR OFF PRESET TUNED STEREO MHzS Frequency To Do this Turn off the radio Press 1/u. Adjust the volume Turn VOLUME (or press VOLUME +/– on the remote). To listen to non-preset radio stations Press TUNING MODE repeatedly in step 2 until “MANUAL” appears, then press TUNING +/– to tune in the desired station. Tips • Pressing TUNER/BAND while the system power is off automatically turns on the system and tunes to the last received station (One Touch Play). • You can switch from another source to the radio just by pressing TUNER/BAND (Automatic n Source Selection). • If an FM program is noisy, press STEREO/ 4 band model: MONO so “MONO” appears in the display. There will be no stereo effect, but the reception will improve. Press this button again to restore the stereo effect. FM nMW nLW nUKV* n * When you select this band, “STEREO Plus” appears in the display. • To improve broadcast reception, move the supplied antennas. 3 Press TUNING +/– to tune in a Recording from the preset station. radio LBT-D390/D790/G5500/XB33/XB33K/XB44/ XB44K/XB50/XB60 You can record a radio program on a tape by Preset number tuning in a preset station. You can use TYPE I (normal) or TYPE II (CrO2) tapes. The recording level is automatically adjusted. (Power) SURROUND 1/u 3 21 DOLBY NR »p 6 745 1 Press TUNER/BAND repeatedly until the band you want appears in the display. 2 Press TUNING MODE repeatedly u...

Эта инструкция также подходит к моделям:
Музыкальные центры - LBT-D390 (835.59 kb)
Музыкальные центры - LBT-D790 (835.59 kb)
Музыкальные центры - LBT-G5500 (835.59 kb)
Музыкальные центры - LBT-XB33 (835.59 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории