Оценок - 3, средний балл: 3.7
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
• To record the flash effect, use the analog (MD OUT) connections or this unit’s tape deck. Using the drum pads With the drum pads, you can add percussion during playback. This effect can be used with any source, to create original recordings. BEAT (Power) LEVEL Jog dial PAD A PAD B A . A. PAD A PAD B SPEED ?// SELECT >/. /Tap drum PAD A or B to produce the respective sound. To change the drum sound Turn the jog dial while holding PAD A or B (or press SELECT >or .while holding PAD A or B on the remote) to select the sound you desire. You can select from a variety of different drum sounds. The name of the drum sound appears in the display. . KICK < SNARE < • • • > The sound you select will be stored in pad A or B. To create a drum roll Hold down both PAD A and B on the front panel. Turn the jog dial counterclockwise for PAD A or clockwise for PAD B. To adjust the volume of the pads Press BEAT LEVEL repeatedly to select the level you desire. Each time you press the button the level changes as follows: LEVEL 1 /LEVEL 2 /LEVEL 3 /LEVEL MAX /LEVEL 1 . . . /Press BEAT ON/OFF during Using the beat playback at the point you want tofunctions start the beat. The button’s indicator lights up. With the beat functions, you can enjoy a variety of rhythms. They can be used with To change the speed any source, to create original recordings. Turn the jog dial while holding BEAT SPEED (or press SPEED ?or /on the remote) to select the speed you desire (BPM 60~160). BEAT (Power) LEVEL Jog dial To change the beat pattern Turn the jog dial while holding BEAT SELECT (or press SELECT >or .on the remote) to select the pattern you desire. The name of the beat pattern appears in the display. . 8 BEAT 1 < • • • < SLAM > BEAT BEAT BEAT BEAT AUTO BPM ON/OFF SELECT SPEED JAM A . A. BEAT ON/OFF SPEED ?// SELECT >/. To cancel the beat Press BEAT ON/OFF. Make sure the button’s indicator turns off. To change the beat volume Press BEAT LEVEL repeatedly to select the level you desire. Each time you press the button the level changes as follows: LEVEL 1 /LEVEL 2 /LEVEL 3 /LEVEL MAX /LEVEL 1 . . . Tips • You can use the drum pads and the beat function together. • Press DEMO while the power is on to hear all drum sounds and beat patterns played repeatedly. Press any key (except BEAT LEVEL) to stop. Using the BEAT JAM function This function automatically synchronizes the sounds of PAD A and B with the sound source. 1 Start playing a source. 2 Press BEAT JAM repeatedly to select the jam mode you desire. The button’s indicator lights up. Every time you press the button, the display changes as follows: . PAD MODE . RANDOM MODE . JAM OFF PAD MODE This mode emphasizes the rhythm of the source by playing the sound stored at PAD A in sync with the bass and playing the sound stored at PAD B in sync with the treble. RANDOM MODE This mode emphasizes the rhythm of the source by playing random sounds (from the drum pad library) in sync with source. Note BEAT JAM cannot be used at the same time as the BEAT (BEAT ON) function. When BEAT JAM is turned ON, BEAT turns OFF automatically. Likewise, when the BEAT is turned ON, BEAT JAM turns OFF automatically. Using the AUTO BPM function This function automatically synchronizes the rhythm of the current beat pattern with the sound source. 1 Start playing a source. 2 Select a beat pattern. (See “To change the beat pattern” on page 30.) 3 Press BEAT ON/OFF to stop the beat function. 4 Press AUTO BPM. The button’s indicator blinks orange while measuring the source’s BPM. Once measured, the indicator lights green. 5 Listen to the sound source and press BEAT ON/OFF at the downbeat. The rhythm of the beat pattern starts in sync with the source. Tip If the downbeat of the rhythm does not match the source, press BEAT ON/OFF to turn the beat off. Then, in time with the source, press BEAT ON/OFF again to restart the beat. Notes • AUTO BPM may not work with certain songs (such as those with varying tempos). In such cases, the AUTO BPM indicator continues blinking orange and “AUTO BPM NG” appears in the display. • The amount of time required to measure a song’s BPM (after pressing AUTO BPM) varies for each song. • AUTO BPM stops automatically when it encounters a blank of (or greater than) 1.5 seconds. It will, however, resume automatically when the music begins again. • AUTO BPM stops automatically when you turn the jog dial while holding BEAT SPEED. Sound Adjustment Sound Adjustment Adjusting the sound You can reinforce the bass, create a more powerful sound, and listen with headphones. (Power) GROOVE MUTING* DBFB PHONES * MHC-RX88 only. For MHC-GRX8/RX99/R800 see “Switching the speaker formation” on page 36. To reinforce bass (DBFB) Press DBFB*. Every time you press the button, the display changes as follows: nDBFB NORMAL (DBFB µ DBFB HIGH (DBFB µ DBFB OFF (off) ) ) * DBFB = Dynamic Bass Feedback For a powerful sound (GROOVE) Press GROOVE. The volume switches to power mode, DBFB is automatically set to full strength, the equa...
Эта инструкция также подходит к моделям:Музыкальные центры - MHC-R800 (988.02 kb)
Музыкальные центры - MHC-RX99 (988.02 kb)