Оценок - 3, средний балл: 2.7
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
BEAT (Power) LEVEL Jog dial To change the beat pattern Turn the jog dial while holding BEAT SELECT (or press SELECT >or .on the remote) to select the pattern you desire. The name of the beat pattern appears in the display. . 8 BEAT 1 < • • • < SLAM > BEAT BEAT BEAT BEAT AUTO BPM ON/OFF SELECT SPEED JAM A . A. BEAT ON/OFF SPEED ?// SELECT >/. To cancel the beat Press BEAT ON/OFF. Make sure the button’s indicator turns off. To change the beat volume Press BEAT LEVEL repeatedly to select the level you desire. Each time you press the button the level changes as follows: LEVEL 1 /LEVEL 2 /LEVEL 3 /LEVEL MAX /LEVEL 1 . . . Tips • You can use the drum pads and the beat function together. • Press DEMO while the power is on to hear all drum sounds and beat patterns played repeatedly. Press any key (except BEAT LEVEL) to stop. Using the BEAT JAM function This function automatically synchronizes the sounds of PAD A and B with the sound source. 1 Start playing a source. 2 Press BEAT JAM repeatedly to select the jam mode you desire. The button’s indicator lights up. Every time you press the button, the display changes as follows: . PAD MODE . RANDOM MODE . JAM OFF PAD MODE This mode emphasizes the rhythm of the source by playing the sound stored at PAD A in sync with the bass and playing the sound stored at PAD B in sync with the treble. RANDOM MODE This mode emphasizes the rhythm of the source by playing random sounds (from the drum pad library) in sync with source. Note BEAT JAM cannot be used at the same time as the BEAT (BEAT ON) function. When BEAT JAM is turned ON, BEAT turns OFF automatically. Likewise, when the BEAT is turned ON, BEAT JAM turns OFF automatically. Using the AUTO BPM function This function automatically synchronizes the rhythm of the current beat pattern with the sound source. 1 Start playing a source. 2 Select a beat pattern. (See “To change the beat pattern” on page 30.) 3 Press BEAT ON/OFF to stop the beat function. 4 Press AUTO BPM. The button’s indicator blinks orange while measuring the source’s BPM. Once measured, the indicator lights green. 5 Listen to the sound source and press BEAT ON/OFF at the downbeat. The rhythm of the beat pattern starts in sync with the source. Tip If the downbeat of the rhythm does not match the source, press BEAT ON/OFF to turn the beat off. Then, in time with the source, press BEAT ON/OFF again to restart the beat. Notes • AUTO BPM may not work with certain songs (such as those with varying tempos). In such cases, the AUTO BPM indicator continues blinking orange and “AUTO BPM NG” appears in the display. • The amount of time required to measure a song’s BPM (after pressing AUTO BPM) varies for each song. • AUTO BPM stops automatically when it encounters a blank of (or greater than) 1.5 seconds. It will, however, resume automatically when the music begins again. • AUTO BPM stops automatically when you turn the jog dial while holding BEAT SPEED. Sound Adjustment Sound Adjustment Adjusting the sound You can reinforce the bass, create a more powerful sound, and listen with headphones. (Power) GROOVE MUTING* DBFB PHONES * MHC-RX88 only. For MHC-GRX8/RX99/R800 see “Switching the speaker formation” on page 36. To reinforce bass (DBFB) Press DBFB*. Every time you press the button, the display changes as follows: nDBFB NORMAL (DBFB µ DBFB HIGH (DBFB µ DBFB OFF (off) ) ) * DBFB = Dynamic Bass Feedback For a powerful sound (GROOVE) Press GROOVE. The volume switches to power mode, DBFB is automatically set to full strength, the equalizer curve changes, and the “GROOVE” button lights up. Press GROOVE again to return to the previous volume. Notes • With some songs, the music will sound distorted when you use the DBFB system with the graphic equalizer if the bass is too strong. Adjust the bass slowly while listening to music so that you can monitor the effect of the adjustment. • Cancelling GROOVE sets DBFB to “DBFB ” and flattens the equalizer curve. To cancel the DBFB level, press DBFB until the indication disappears. Adjust the equalization to obtain the effect you desire. To listen through the headphones Connect the headphones to PHONES jack. No sound will come from the speakers. Note If you have connected a super woofer, please note that sound comes from the super woofer even when the headphones are connected. Turn off the power of the super woofer when using headphones. To temporarily mute the sound (MHC-RX88 only) Press MUTING. The sound is muted and the “MUTING” button lights up. Press MUTING again or turn VOLUME toward + (or press VOL + on the remote) to cancel. Selecting the audio emphasis The audio emphasis menu lets you select the sound characteristic according to the sound you are listening to. The personal file function (see “Making a personal audio emphasis file”) lets you store your own effects. (Power) 1 23 EFFECT 1 Press FILE SELECT. The last effect chosen appears in the display. 2 Use the jog dial to select the preset you desire. The preset name appears in th...
Эта инструкция также подходит к моделям:Музыкальные центры - MHC-RX88 (987.6 kb)
Музыкальные центры - MHC-GRX8 (987.6 kb)