Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
You need to connect an optional microphone. 5 Adjust the microphone volume by turning MIC LEVEL. When you are done Turn MIC LEVEL to MIN and disconnect the microphone from MIX MIC, then press KARAOKE PON/MPX repeatedly so that 3 1,5 POWER VOLUME 2 1 Turn MIC LEVEL to MIN to turn down the microphone control level. 2 Connect an optional microphone to MIX MIC. 3 Press KARAOKE PON/MPX repeatedly to obtain the karaoke effect you desire. Every time you press the button, the display changes as follows: “h” disappears. Mixing and recording sounds POWER 5 25 p. 134 21 3 n KARAOKE PON nMPX R nMPX L Effect (or P FILE) name or N “EFFECT ON (OFF)” The hindicator appears in the display when a karaoke mode is activated. To sing karaoke with decreasing the vocal level of a CD, select KARAOKE PON. To sing karaoke of multiplex CD or tape, select MPX R or MPX L. 4 Start playing the music and adjust the volume. 1 Do the above steps 1 to 5. Then, insert a tape in deck B. 2 Press FUNCTION repeatedly to select the source you desire and set it to pause mode. continued Singing along: Karaoke (continued) 3 Press REC. 4 Press PAUSE P. 5 Start playing the source selected in Step 2. Playback starts. Start singing along with the music. To stop recording Press .on deck B and pon the CD player. Tips • If acoustic feedback (howling) occurs, move the microphone away from the speakers or change the direction of the microphone. • If you want to record your voice through the microphone only, you can do so by selecting the CD function and not playing a CD. Notes • If you press EFFECT ON/OFF or recall a sound effect, the karaoke mode is cancelled. • The instrumental sound may be reduced as well as the singer’s voice when the sound is recorded in monaural. • The singer’s voice may not be reduced when: —only a few instruments are playing —a duet is being played —the source has strong echoes or chorus —the singer’s voice deviates from the centre —the voice on the source is singing in high soprano or tenor. Falling asleep to music — Sleep Timer You can let the system turn off at the preset time, so you can sleep to the music. You can preset the time to be turned off by 10 minutes. SLEEP bBvV /Press SLEEP on the remote. Every time you press the button, the minutes display (the turn-off time) changes as follows: AUTO n90min n80min n70min n… n10min nOFF nAUTO … When you choose auto The power turns off when the current CD or tape finishes playback (for up to 100 minutes). To check the remaining time Press SLEEP on the remote once. To change the time to turn off Select the time you want by pressing SLEEP on the remote. To cancel the Sleep Timer function Press SLEEP on the remote repeatedly until “OFF” appears. Waking up to music — Wake-up Timer You can wake up to music at a preset time every day. Make sure you have set the clock (see “Step 2: Setting the time”). TIMER 9 4,5,6,7,8 SELECT 32 1 Prepare the music source you want to play. • CD: Insert a CD. To start from a specific track, make a program (see “Programming the CD tracks”). • Tape: Insert a tape with the side you want to play facing forward. • Radio: Tune in the preset station you want (see “Step 3: Presetting radio stations”). 2 Adjust the volume. 3 Press CLOCK TIMER SET. “SET (DAILY 1)” appears. 4 Turn the jog dial to select DAILY 1 or 2, then press ENTER/NEXT. “ON” appears and the hour digits flash in the display. 5 Set the time to start playback. Turn the jog dial to set the hour, then press ENTER/NEXT. The minutes indication starts flashing. VOLUME 1 Turn the jog dial to set the minutes, then press ENTER/NEXT. The hour indication flashes again. 6 Set the time to stop playback following the above procedure. 7 Turn the jog dial until the music source you want appears. The indications change as follows: TUNER nCD PLAY nTAPE PLAY 8 Press ENTER/NEXT. The start time appears, followed by the stop time and the music source, then the original display appears. 9 Turn off the power. VOLUME 1 continued Waking up to music (continued) To check the setting Press TIMER SELECT and turn the jog dial to select the respective mode (DAILY 1 or DAILY 2), then press ENTER/NEXT. To change the setting, start over from step 1. To cancel the timer operation Press TIMER SELECT and turn the jog dial to select “OFF”, then press ENTER/NEXT. Tip The power turns on 15 seconds before the preset time. Note When setting the wake-up timer, set the equalizer display to anything other than Spectrum analyzer pattern 3. (See “To change the equalizer display” on page 28.) Timer-recording radio programs To timer-record, you must preset the radio station (see “Step 3: Presetting radio stations”) and set the clock (see “Step 2: Setting the time”) beforehand. 7 2 3,4,5 21 3 TIMER SELECT 6 1 Tune in the preset radio station (see “Listening to the radio”). 2 Press CLOCK TIMER SET. “SET (DAILY 1)” appears. 3 Turn the jog dial to select REC, then press ENTER/NEXT. “ON” appears and the hour digits flash in the display. VOLUME REC 4 Set the ...