Оценок - 5, средний балл: 3.6
(
)
)
|
Фрагмент инструкции
To the audio output To the audio input of the MD deck of the MD deck Note If you cannot select “MD” even when you have pressed FUNCTION, press POWER while pressing FUNCTION when the power is turned off. “VIDEO” will be switched to “MD”. To return to “VIDEO” do the same procedure. Tip If you connect a turntable with MM cartridge, connect it to VIDEO/MD IN using the optional MM cartridge equalizer EQ-2 and an audio connecting cord. To listen to the sound, press FUNCTION repeatedly until “VIDEO” appears. Connecting a super woofer speaker (except for MHC-D60) You can connect an optional super woofer speaker. To super woofer Connecting surround speakers (U.S. and Canadian models only) You can connect an optional surround speakers. To surround speaker (R) To surround speaker (L) Connecting a VCR Make sure to match the color of the plugs and the connectors. To listen to the sound of the connected VCR, press FUNCTION repeatedly until “VIDEO” appears. To the audio output of the VCR Note If the sound is distorted when selecting “VIDEO”, switch to “MD” (see “Note” on page 8). continued Note You need to connect both left and right surround speakers. Otherwise, the sound will not be heard. Connecting optional AV components (continued) Connecting outdoor antennas Connect the outdoor antenna to improve the reception. FM antenna Connect the optional FM outdoor antenna. You can also use the TV antenna instead. FM75 AM 75-ohm coaxial cable (not supplied) Screw clamp Ground wire (not supplied) AM antenna Connect a 6- to 15- meter (20- to 50- feet) insulated wire to the AM antenna terminal. Leave the supplied AM loop antenna connected. Screw clamp FM75 AM Insulated wire (not supplied) Ground wire (not supplied) Important If you connect an outdoor antenna, ground from yterminal with the screw clamp. To prevent a gas explosion, do not connect the ground wire to a gas pipe. 10 Basic Operations Basic Operations Playing a CD — Normal play You can play up to three CDs in a row. 0) 21 a. 1/ALL DISCS VOLUME CD ( a.a..»a¤¤¤ 0) a..»a.DISC SKIP EX-CHANGE POWER bBvV P p =+ 0) VOL +/– 1 Press ¤OPEN/CLOSE and place up to two CDs on the disc tray. If a disc is not placed properly it will not be recognized. With the label side up. When you play a single CD, place it on the inner circle of the tray. a.¤ 0)+=. To insert a third disc, press DISC SKIP EX-CHANGE to rotate the disc tray. 2 Press one of the DISC 1~3 buttons. The disc tray closes and play starts. If you press a.(or aon the remote) when the disc tray is closed, play starts from the CD loaded on the tray whose button is lit green. Disc tray number Playing time continued Basic OperationsVOLUME ALL 1DISCS Track number Playing a CD (continued) Tips To Do this Stop play Press .(pon the remote). Pause Press a.(Pon the remote). Press again to resume play. Select a track During play or pause, turn the jog dial clockwise (to go forward) or counterclockwise (to go back) and release it when you reach the desired track. Or press +(to go forward) or =(to go back) on the remote. Find a point in Press and hold down )or a track 0(or )/0on the remote) during play and release it at the desired point. Select a CD Press a DISC 1~3 button or in stop mode DISC SKIP EX-CHANGE. Play only the Press 1/ALL DISCS CD you have repeatedly until “1 DISC” selected appears. Play all CDs Press 1/ALL DISCS repeatedly until “ALL DISCS” appears. Remove the CD Press ¤OPEN/CLOSE. Exchange other Press DISC SKIP CDs while EX-CHANGE. playing Adjust the Turn VOLUME (or press VOL volume +/– on the remote). • Pressing a.when the power is off automatically turns the power on and starts CD playback if there is a CD in the tray (One Touch Play). • You can switch from another source to the CD player and start playing a CD just by pressing a.or the DISC 1~3 buttons (Automatic Source Selection). • If there is no CD in the player, “CD NO DISC” appears in the display. • When a disc tray is selected or the CD placed on that tray is playing, the DISC 1~3 button for the respective tray lights green. Recording a CD — CD Synchro Recording The CD SYNCHRO button lets you record from a CD to a tape easily. You can use TYPE I (normal) or TYPE II (CrO2) tapes. The recording level is adjusted automatically. DISC SKIP a.a.¤.0) a. POWER 24EX-CHANGE . · . · § . DOLBY NR 35 . 1 1 Press ¤EJECT and insert a blank tape into deck B. With the side you want to record facing forward ¤a.»a 2 Press ¤OPEN/CLOSE and place a CD. Then press again to close the disc tray. If the indicator for the tray you want to record is not lit green, press DISC SKIP EX-CHANGE repeatedly so that it lights green. With the label side up. When you play a single CD, place it on the inner circle of the tray. a.¤ 0)+=. 3 Press CD SYNCHRO. Deck B stands by for recording and the CD player stands by for playback. · (for front side) lights up. 4 Press DIRECTION repeatedly to select Ato record on one side. Select a(or RELAY) to record on both sides. 5 Press .on deck B. Recording starts. To s...
Эта инструкция также подходит к моделям:Музыкальные центры - MHC-D60 (632.83 kb)
Музыкальные центры - MHC-GR7 (632.83 kb)
Музыкальные центры - MHC-RX70 (632.83 kb)