Оценок - 2, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
If you start from the reverse side, recording stops at the end of the reverse side. •To record non-preset stations, select “MANUAL” in step 2, then turn the jog dial to tune in the desired station. • When you want to reduce the hiss noise in low- level high-frequency signals, press DOLBY NR so that “DOLBY NR B” appears after pressing r. • If noise is heard while recording from the radio, move the respective antenna to reduce the noise. Basic Operations 1 Press § EJECT and insert a Playing a tape recorded tape in deck A or B. You can use any type of tape, TYPE I With the side (normal), TYPE II (CrO2) or TYPE IV (metal) , you want to since the deck automatically detects the tape play facing type. To select either deck A or B, press forward DECK A or DECK B on the remote. . … „» . .. 113 3. / ‚ 2 .‚ … „ » . . „0 ) … „» . POWER DOLBY NR VOLUME 4 $ 4$ )0 P += p . .» .» DECK A ». DECK B ». p P 0) VOLUME +/– 2 Press DIRECTION repeatedly to select A to play one side. Select a* to play both sides. To play both decks in succession, select RELAY (relay play).** 3 Press ·. Press . to play the reverse side. The tape starts playing. * The deck stops automatically after repeating the sequence five times. ** Relay play always follows the following sequence: Deck A (front side), Deck A (reverse side), Deck B (front side), Deck B (reverse side). To Do this Stop play Press (or p on the remote). Pause (Deck B only) Press . Press again to resume play. Fast-forward Press ‚ while playing the front side or . while playing the reverse side. Rewind Press . while playing the front side or ‚ while playing the reverse side. Remove the cassette Press § EJECT. Adjust the volume Turn VOLUME (or press VOLUME +/– on the remote). Tips • Pressing · or . when the power is off automatically turns the power on and starts tape playback if there is a tape in the deck (One Touch Play). • You can switch from another source to the tape deck just by pressing · or . (Automatic Source Selection). • When you want to reduce the hiss noise in low- level high-frequency signals, press DOLBY NR so that “DOLBY NR B” appears. • When dubbing tapes originally recorded with Dolby NR B, the dubbed tape is automatically played with Dolby NR B. Recording from a tape — High-speed Dubbing You can use TYPE I (normal) or TYPE II (CrO2) tapes. The recording level is automatically adjusted. DOLBY Basic Operations .‚ … „ » . . „0 ) … „» . POWER 2 41 NR 1 3 1 Press § EJECT and insert a recorded tape in deck A and a blank tape in deck B. With the side you want to play/record facing forward . … „» . .. 2 Press HIGH SPEED DUBBING. Deck B stands by for recording. continued Recording from a tape (continued) 3 Press DIRECTION repeatedly to select A to record on one side. Select a (or RELAY) to record on both sides. 4 Press . Dubbing starts. To stop dubbing Press on deck A or B. Tips • When you dub on both sides, start recording from the front side. If you record from the reverse side, recording stops at the end of the reverse side. • If you set DIRECTION to a when the tapes you use have different lengths, the tape in each deck reverses independently. If you select RELAY, the tapes in both decks reverse together. • You don’t have to set DOLBY NR, since the tape in deck B is automatically recorded in the same state as the tape in deck A. 22 The CD Player Using the CD display You can check the remaining time of the current track or that of the CD. .‚. „0 ) POWER DISPLAY/DEMO / Press DISPLAY/DEMO during playback. Each time you press the button during normal playback, the display changes as follows: n Playing time on the current track . Remaining time on the current track . Remaining time on current CD (1 DISC mode) or “PLAY” display (ALL DISCS mode) . Clock display (for eight seconds) . Effect (P FILE) name or “EFFECT ON (OFF)” To check the total playing time and the number of tracks on a CD Press DISPLAY/DEMO in the stop mode. If you press DISPLAY/DEMO again, the clock display appears for eight seconds then the display returns to the previous indication. Playing the CD tracks repeatedly –– Repeat Play This function lets you repeat a single CD or all CDs in normal play, Shuffle Play and Program Play. .‚. „0 ) POWER REPEAT1/ALL DISCS / Press REPEAT during playback until “REPEAT” appears in the display. Repeat Play starts. Do the following procedure to change the repeat mode. To repeat Press All the tracks on 1/ALL DISCS repeatedly the current CD until “1 DISC” appears in the display. All the tracks on 1/ALL DISCS repeatedly all CDs until “ALL DISCS” appears in the display. Only one track* REPEAT repeatedly until “REPEAT 1” appears in the display while playing the track you want to repeat. * You can’t repeat a single track during Shuffle Play and Program Play. To cancel Repeat Play Press REPEAT so that “REPEAT” or “REPEAT 1” disappears from the display. Playing the CD tracks in random order –– Shuffle Play You can play all the tracks on one CD or all CDs in random order. .‚ … „ » . . . ...
Эта инструкция также подходит к моделям:Музыкальные центры - MHC-D90AV (653.36 kb)
Музыкальные центры - MHC-RX100AV (653.36 kb)