Оценок - 4, средний балл: 4.3
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
playing Adjust the Turn VOLUME (or press VOL volume +/– on the remote). Recording a CD — CD Synchro Recording The CD SYNCHRO button lets you record from a CD to a tape easily. You can use TYPE I (normal) or TYPE II (CrO2) tapes. The recording level is adjusted automatically. a.a.¤.0) a. POWER 24DISC SKIP EX-CHANGE . · . · § . DOLBY NR . 35 1 1 Press ¤EJECT and insert a blank tape into deck B. With the side you want to record facing forward ¤a.»a.. 2 Press ¤ OPEN/CLOSE and place a CD. Then press again to close the disc tray. If the indicator for the tray you want to record is not lit green, press DISC SKIP EX-CHANGE repeatedly so that it lights green. With the label side up. When you play a single CD, place it on the inner circle of the tray. a.¤ 0)+.= 3 Press CD SYNCHRO. Deck B stands by for recording and the CD player stands by for playback. · (for front side) lights up. 4 Press DIRECTION repeatedly to select Ato record on one side. Select a (or RELAY) to record on both sides. 5 Press .on deck B. Recording starts. To stop recording Press .on deck B or on the CD player. Tips • If you want to record from the reverse side, press » so that » (for reverse side) lights up. • When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side. • When you want to reduce the hiss noise in low- level high-frequency signals, press DOLBY NR so that “DOLBY NR B” appears after pressing CD SYNCHRO. Note You cannot listen to other sources while recording. Basic Operations 2 Press TUNING MODE repeatedly Listening to the radio so that “PRESET” appears in the –– Preset Tuning display. MANUAL nAUTO nPRESET Preset radio stations in the tuner's memory first (see “Step 3: Presetting radio stations”). n a.a..»a¤¤.0) a.»a POWER bBvV=+ TUNER BAND VOLUME STEREO/MONO VOL +/– 123 (or press = 3 Turn the jog dial (or press = or +on the remote) to tune in the desired preset station. Turn counter-Turn clockwise clockwise (or press + +– on the remote) on the remote) for higher for lower preset preset numbers. numbers. Preset number Frequency TUNED STEREO MHz VOLUME PRESET To Do this Turn off the radio Press POWER. Adjust the volume Turn VOLUME (or press VOL +/– on the remote). 1 Press TUNER/BAND repeatedly until the band you want appears in the display. Every time you press the button, the band changes as follows: North and South American, Australian and Thai models: FM .AM Other models: FM nMW nSW n To listen to non-preset radio stations Press TUNING MODE repeatedly so that “MANUAL” appears in step 2, then tune in the station by turning the jog dial. Tips • Pressing TUNER/BAND when the power is off automatically turns the power on and tunes to the last received station (One Touch Play). • You can switch from another source to the radio just by pressing TUNER/BAND (Automatic Source Selection). • When an FM program is noisy, press STEREO/MONO so that “MONO” appears in the display. There will be no stereo effect, but the reception will improve. Press the button again to restore the stereo effect. • To improve broadcast reception, reorient the supplied antennas. Recording from the radio You can record the radio program on a tape by calling up a preset station. You can use TYPE I (normal) or TYPE II (CrO2) tapes. The recording level is automatically adjusted. a.a.»a¤.0) a. POWER 1236 . · § . Basic Operations DOLBY NR . 57 4 1 Press TUNER/BAND to select the band you want. 2 Press TUNING MODE so that “PRESET” appears in the display. 3 Turn the jog dial to tune in a preset station. Turn counter- +– Turn clockwise clockwise for for higher lower preset preset numbers. numbers. Preset number Frequency TUNED STEREO MHz VOLUME PRESET continued 15 Recording from the radio (continued) 4 Press ¤EJECT and insert a blank tape into deck B. With the side you want to record facing forward ¤a.»a.. 5 Press r. Deck B stands by for recording. 6 Press DIRECTION repeatedly to select Ato record on one side. Select a(or RELAY) to record on both sides. 7 Press .on deck B. Recording starts. To stop recording Press . on deck B. Tips • If you want to record from the reverse side, press »so that »(for reverse side) lights up. • When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side. •To record non-preset stations, select “MANUAL” in step 2, then turn the jog dial to tune in the desired station. • When you want to reduce the hiss noise in low- level high-frequency signals, press DOLBY NR so that “DOLBY NR B” appears after pressing r. • If noise is heard while recording from the radio, move the respective antenna to reduce the noise. Playing a tape You can use any type of tape, TYPE I (normal), TYPE II (CrO2) or TYPE IV (metal) , since the deck automatically detects the tape type. To select either deck A or B, press DECK A or DECK B on the remote. 113 3.../a. 2 a.a.»a¤.0) a..»a POWER DOLBY NR VOL...
Эта инструкция также подходит к моделям:Музыкальные центры - MHC-GR7 (934.77 kb)
Музыкальные центры - MHC-RX70 (934.77 kb)