Оценок - 5, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
With the label side up. When you play a CD single, place it on the inner circle of the tray. »» 6Pr0) 6 » Pp »» p60)p)0 3 Close the front cover. 4 Press DISC SKIP repeatedly until the disc number you want to record appears in the playing position indicator. 5 Press CD SYNC. Deck B stands by for recording and the CD player stands by for playback, and the indicator on the abutton (for the front side) lights up green. 6 Press DIRECTION repeatedly to select Ato record on one side or §(or RELAY) to record on both sides. 7 Press Pon deck B. Recording starts. To stop recording Press pon deck B or on the CD player. Tips • If you want to record on the reverse side, press . so the indicator on the »button (for the reverse side) lights up green. • When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side. • When you want to reduce the hiss noise in low- level high-frequency signals, press DOLBY NR before step 7 so “DOLBY NR B” appears in the display. • To record with the surround effect, press DSP (or DSP MODE on the remote) so “SUR ” appears in the display. The equalizer settings will not be recorded. Note You cannot listen to other sources while recording. 2 Press TUNING MODE repeatedly Listening to the radio until “PRESET” appears in the — Preset Tuning display. MANUAL nAUTO nPRESET n Before using this function, preset radio stations in the tuner’s memory (see “Step 4: Presetting radio stations”). 3 Press TUNING +/– to tune in the 123STEREO/MONO VOLUMEPOWER TUNER/BAND TUNING +/– VOLUME +/– 1 Press TUNER/BAND repeatedly until the band you want appears in the display. Each time you press this button, the band changes as follows: 3 band model: FM nMW nLW desired preset station. Preset number DISCALL DOLBY NR OFF PRESET TUNED STEREO MHzS Frequency To Do this Turn off the radio Press POWER. Adjust the volume Turn VOLUME (or press VOLUME +/– on the remote). To listen to non-preset radio stations Press TUNING MODE repeatedly in step 2 until “MANUAL” appears, then press TUNING +/– to tune in the desired station. Tips • Pressing TUNER/BAND while the system is off automatically turns on the system and tunes to the last received station (One Touch Play). • You can switch from another source to the radio just by pressing TUNER/BAND (Automatic Source Selection). • If an FM programme is noisy, press STEREO/ MONO so “MONO” appears in the display. There will be no stereo effect, but the reception will improve. Press this button again to restore the stereo effect. • To improve broadcast reception, move the supplied aerials. Basic Operations n 4 band model: FM nMW nLW nUKV n Recording from the radio You can record a radio programme on a tape by tuning in a preset station. You can use TYPE I (normal) or TYPE II (CrO2) tapes. The recording level is automatically adjusted. 4576 123DSP DOLBY NR p» POWER 1 Press TUNER/BAND repeatedly until the band you want appears in the display. 2 Press TUNING MODE repeatedly until “PRESET” appears in the display. 3 Press TUNING +/– to tune in a preset station. Preset number DISCALL DOLBY NR OFF PRESET TUNED STEREO MHzS Frequency 4 Press 6EJECT and insert a blank tape into deck B. With the side you want to record on facing forward »» 6Pr0) 6 »» p0)p 5 Press rREC. Deck B stands by for recording, and the indicator on the abutton (for the front side) lights up green. 6 Press DIRECTION repeatedly to select Ato record on one side or §(or RELAY) to record on both sides. 7 Press Pon deck B. Recording starts. To stop recording Press pon deck B. Tips • If you want to record on the reverse side, press . so the indicator on the »button (for the reverse side) lights up green. • When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side. • To record non-preset stations, select “MANUAL” in step 2, then press TUNING +/– to tune in the desired station. • When you want to reduce the hiss noise in low- level high-frequency signals, press DOLBY NR before step 7 so “DOLBY NR B” appears in the display. • To record with the surround effect, press DSP (or DSP MODE on the remote) so “SUR ” appears in the display. The equalizer settings will not be recorded. • If noise is heard while recording from the radio, move the appropriate aerial to reduce the noise. Basic Operations Playing a tape You can play any type of tape, TYPE I (normal), TYPE II (CrO2) or TYPE IV (metal). The deck automatically detects the tape type. To select either deck A or B, press DECK A »aor DECK B »aon the remote. 0/ 0/ 3 ) VOLUME 3 ) POWER p DOLBY NR pP 21 1 DECK A »· DECK B »· p P 0/) VOLUME +/– continued Playing a Tape (continued) 1 Press 6EJECT and insert a recorded tape in deck A or B. With the side you want to play facing forward »» 6Pr0) 6 »» p0)p Tips • Pressing aor »while the system is off automatically turns on the system and starts tape playback if there is a t...