Оценок - 3, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
3 Press TUNING MODE repeatedly until “PRESET” appears. 4 Turn MULTI JOG to tune in the desired preset station. MULTI JOG Turn counter-Turn clockwise clockwise (or (or press PRESET press PRESET - on + on the remote) the remote) for for higher preset lower preset numbers. numbers. Preset Frequency number 5 Press rREC. The MD deck stands by for recording. 6 Press .on the MD deck. Recording starts. To stop recording Press .on the MD deck. Tips • To record non-preset stations, press TUNING MODE repeatedly until “MANUAL” appears in step 3, then turn MULTI JOG to tune in the desired station. • If noise is heard while recording an AM radio, move the AM loop aerial to reduce the noise. DHCMD5 3-858-048-11 (1)EN The CD player Using the CD display Playing the CD tracks repeatedly You can check the remaining time of the –– Repeat Playcurrent track or that of the CD. DISPLAY ..a.¤.a Press DISPLAY repeatedly during playback. Each time you press the button, the display changes as follows: nPlaying time on the current track. µ Remaining time on the current track. µ Remaining time on the current CD*. * The remaining time on the CD is not displayed during Programme or Shuffle Play. To check the total playing time and the number of tracks on the CD They are displayed during normal or shuffle play stop mode. Total track Total playing number time Tip “--m--s” appears when you check the remaining time of a track whose number is 21 or more. This function lets you repeat a single CD or all CDs in normal play, Shuffle Play and Program Play. REPEAT ..a.¤.a Press REPEAT during play until “REPEAT” appears. Repeat Play starts. Do the following procedure to change the repeat mode. To repeat Press All the tracks on 1/ALL DISCS repeatedly the current CD until “1 DISC” appears in the display. All the tracks on 1/ALL DISCS repeatedly all CDs until “ALL DISCS” appears in the display. Only one track* REPEAT repeatedly until “REPEAT 1” appears in the display while playing the track you want to repeat. * You can’t repeat a single track during Shuffle Play and Program Play. To cancel Repeat Play Press REPEAT so that “REPEAT” or “REPEAT 1” disappears from the display. DHCMD5 3-858-048-11 (1)EN Playing the CD tracks in random order –– Shuffle Play You can play all the tracks on one CD or all CDs in random order. 213 MULTI JOG 4 .a.¤..a.¤.a DISC 1-3 1 Press FUNCTION repeatedly until “CD” appears, then place a CD on the disc tray. 2 Press PLAY MODE repeatedly until “SHUFFLE” appears. 3 Press 1/ALL DISCS. Each time you press the button, the display changes as follows: “ALL DISCS” . “1 DISC” (All the CDs play in random order.) (A single CD whose DISC 1 – 3 button lights green play in random order.) 4 Press a. “J” appears, then all the tracks play in random order. DHCMD5 3-858-048-11 (1)EN To cancel Shuffle Play Press PLAY MODE repeatedly so that “SHUFFLE” disappears. Tips • You can start Shuffle Play during normal play by displaying “SHUFFLE”. • To skip a track, turn MULTI JOG clockwise (or press +on the remote). Programming the CD tracks –– Programme Play You can make a programme of up to 32 tracks from all the CDs in the order you want them to be played. 21 45 .a.¤..a.¤.a 7 . 3 1 Press FUNCTION repeatedly until “CD” appears in the display, then place a CD on the disc tray. 2 Press PLAY MODE repeatedly until “PROGRAM” appears. 3 Press one of the DISC 1 – 3 buttons to select a CD. 4 Turn MULTI JOG until the desired track appears in the display. Selected track Playing time 5 Press ENTER/YES. The track is programmed. The last programmed track appears, followed by the total playing time. 6 To programme additional tracks, repeat steps 3 to 5. Skip step 3 if you select a track from the same disc. 7 Press a. All the tracks play in the order you selected. To check the total number of the programmed tracks Press DISPLAY in the stop mode. “Step” appears, followed by the total number of the programmed tracks. To Press Cancel ., then PLAY MODE Programme repeatedly so that Play “PROGRAM” disappears. Add a track to 1 Select the disc tray with the programme DISC 1 – 3 buttons. (in stop mode) 2 Select the track by turning MULTI JOG. 3 Press ENTER/YES. Clear the entire .once in the stop mode. programme Tips • To programme the entire CD as one step of the programme, skip step 4. • The programme you made remains after the Programme Play has finished. To play the same programme again, press a. When you make a recording with the Hit Parade feature, the programme is erased. • The total playing time is not displayed when you select a track whose number is 21 or more or, the total program time exceeds 100 minutes. DHCMD5 3-858-048-11 (1)EN Looping part of a CD — Loop With the loop function, you can repeat part of a CD during playback. This lets you create original recordings. 1 12,4 3 .a.¤..a.¤.a 1 Press FUNCTION repeatedly until The difference between NORMAL and RHYTHM The original track can be looped in two ways, Normal and Rhythm. Original Hey, Come on everybody! … NORMA...