|
Фото и характеристики Sony MHC-GT222 |
К этому устройству также есть другие инструкции:
Фрагмент инструкции
USB device When the USB cable connection is necessary, connect the USB cable supplied with the USB device to be connected. Refer to the operation manual supplied with the USB device to be connected for details on the operation method. 2 Select the CD function, then load the disc you want to transfer. 3 Press PLAY MODE repeatedly in stop mode to select the play mode. The play mode automatically changes to normal play mode, if you start transferring in shuffle play mode, repeat play mode or in program play mode (when no tracks or MP3 files are programmed). For details about the play mode, see “To change the play mode” (page 17). 4 Press REC TO on the unit. USB “USB”, “SYNC” and “REC” light up in the display. Then, transferring starts when “DON’T REMOVE” appears in the display. When the transferring is completed, the disc and the USB device stop automatically. Transferring a single track or MP3 file during playback (REC1 Transferring) You can easily transfer the track or MP3 file that is currently being played back onto an USB device. 1 Connect a transferable USB device to the (USB) port on the unit. 2 Select the CD function, then load the disc you want to transfer. 3 Select the track or MP3 file you want to transfer, then start play. 18GB 4 4 USB on the unit while the selected track or MP3 file is being played back. “USB” and “REC” light up in the display. Then, transferring starts from the beginning of the track or file when “DON’T REMOVE” appears in the display. When the transferring is completed, the disc continues to play. Transferring from a sound source other than disc (Analog Transferring) You can easily transfer from a tape, tuner, optional audio component or component connected to the DIGITAL MEDIA PORT adapter onto an USB device. 1 Connect a transferable USB device to the (USB) port on the unit. 2 Select the source you want to transfer. For tape, insert a tape. For tuner, tune in the station you want to transfer. 3 Start play back the source. 4 Press REC TO USB on the unit. “USB” and “REC” light up in the display. Then, transferring starts when “DON’T REMOVE” appears in the display. Tips • A new MP3 file is created automatically after approximately 1 hour of transferring. • Transferring stops automatically when you change the function or tuner band. To stop transferring Press x. To create a new MP3 file Press REC TOUSB on the unit. “NEW TRACK” appears in the display. If you press REC TOUSB again after a few seconds, “NOT IN USE” appears in the display and a new MP3 file cannot be created. To transfer sound from a microphone 1 Press FUNCTION (RM-AMU006) or FUNCTION +/– (RM-AMU008) repeatedly (or press TAPE on the unit) to select the TAPE function, and do not start playing any tape. 2 Press REC TO USB on the unit. 3 Start singing or speaking into the microphone. To select the playback source or transferring destination on a Sony Ericsson mobile phone When listening to music from a Sony Ericsson mobile phone or when transferring music from this system to the mobile phone, you can select the playback source or transferring destination as follows: – internal memory of the mobile phone. – external memory (such as Memory Stick, etc.). 1 Connect the mobile phone to the (USB) port on the unit. 2 Press OPTIONS on the unit in stop mode. 3 Turn OPERATION DIAL on the unit to select “USB SELECT”. Basic Operations Continued l 19GB 4 4 The drive name of the mobile phone appears in the display but varies depending on the specification of the mobile phone. 5 Turn OPERATION DIAL on the unit to select the drive you want. 6 Press ENTER on the unit. 7 Start playback of the audio files in the selected drive of the mobile phone or start transferring. To remove the USB device Use the buttons on the unit for this operation. 1 Press USB to select the USB function. 2 Hold down x in stop mode until “NO DEVICE” appears. 3 Remove the USB device. Folder and file generation rules When transferring to an USB device, a “MUSIC” folder is created directly below the “ROOT”. Folders and files are generated within this “MUSIC” folder as follows according to the transferring method and source. CD-USB Synchronized Transfer1) REC1 Transferring Transferring source Folder name File name MP3 “REC1”5) Same as the transferring source2) AUDIO CD “TRACK001”4) Analog Transferring Transferring source Folder name File name FM “TUFM001”3) “TRACK001”4) AM “TUAM001”3) TAPE “TAPE001”3) AUDIO “EXAU001”3) DMPORT “EXDP001”3) 1) In Program Play mode, the folder name is “PGM_xxx”, and the file name depends on the transferring source (AUDIO CD or MP3 disc). 2) Up to 32 characters of the name are assigned. 3) Folder numbers are assigned serially thereafter. 4) File numbers are assigned serially thereafter. 5) A new file is transferred in the “REC1” folder each time REC1 Transferring is performed. Transferring source Folder name File name MP3 Same as the transferring source2) AUDIO CD “CDDA001”3) “TRACK001”4) 20GB Notes Notes Do not connect the system and the USB...
Эта инструкция также подходит к моделям:Музыкальные центры - MHC-GT111 (1.55 mb)
Музыкальные центры - MHC-GT444 (1.55 mb)
Музыкальные центры - LBT-ZT4 (1.55 mb)
Музыкальные центры - MHC-GT555 (1.55 mb)