Оценок - 4, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
See the operation manual supplied with the USB device to be connected for details on the operation method. When the USB device is connected, the display changes as follows: “Reading” .“ATRAC AD1)” or “STORAGE DRIVE2)” 1) When connecting a digital music player. 2) When connecting USB storage media. The volume label is displayed next if recorded. Note It may take about 10 seconds before “Reading” appears depending on the type of USB device connected. 3 Start playback. Press . (or USB .. on the unit) .. 4 Adjust the volume. Press VOLUME +/. (or turn the VOLUME control on the unit) .. Other operation To Press Pause playback . (or USB .. on the unit) .. To resume play, press the button again1). Stop playback ... To resume play, press . (or USB .. on the unit) .. To cancel resume play, press .. again. Select a folder +/... Select a file ./... Select a folder SEARCH .. Press and file while ./.. to select viewing the the desired folder, then folder and file press ENTER .. Press names on the ./.. to select system display2) the desired file, then press ENTER .. Find a point in Hold down ./. a file . during playback, and release the button at the desired point. Select Repeat REPEAT . repeatedly Play until “REP” or “REP1” appears. Remove the Hold down .. on USB device the unit in stop mode until “No Device” appears, then remove the USB device. 1) When playing a VBR MP3 file, the system may resume playback from a different point. 2) You can search by different information such as album or genre for digital music players. To change the play mode Press PLAY MODE . repeatedly while the USB device is stopped. You can select normal play (“ ” for all files in the folder on the digital music player), shuffle play (“SHUF” or “ SHUF”), or program play (“PGM”). 1 GB Notes on the USB device .Do not connect the system and the USB device through a USB hub. .With some connected USB devices, after an operation is performed, there may be a delay before it is performed by this system. .This system does not necessarily support all the functions provided in a connected USB device. .The playback order for the system may differ from the playback order of the connected USB device. .Always hold down .. and make sure that “No Device” appears before removing the USB device. Removing the USB device while “No Device” is not displayed may corrupt the data on it or damage the USB device itself. .Do not save other types of files or unnecessary folders on an USB device that has audio files. .Folders that have no audio files are skipped. .Files are played back in the order that they are transferred to the USB device. .The maximum numbers of folders and files that can be contained on a single USB device are as follows: . Digital music player: 65,535 groups (maximum 999 tracks per group) . USB storage media: 999 files The maximum number of files and folders may vary depending on the file and folder structure. .The audio formats that you can listen to with this system are as follows: . MP3: file extension “.mp3” . Windows Media Audio file: file extension “.wma” . AAC: file extension “.m4a” Note that even when file names have the above file extensions, if the actual file differs, the system may produce noise or may malfunction. .Compatibility with all encoding/writing softwares, recording devices, and recording media cannot be guaranteed. Incompatible USB device may produce noise or interrupted audio or may not play at all. Using optional audio components 1 Connect additional audio component to the AUDIO IN jack .on the unit using an audio analog cord (not supplied). 2 Turn down the volume. Press VOLUME . (or turn the VOLUME control on the unit) .. 3 Select the AUDIO IN function. Press AUDIO IN . on the unit. 4 Start playing the connected component. 5 Adjust the volume. Press VOLUME +/. (or turn the VOLUME control on the unit) .. Basic Operations 1 GB Adjusting the sound To add a sound effect To Press Generate a DSGX . on the unit. more dynamic sound (Dynamic Sound Generator X-tra) Set the sound EQ . repeatedly effect to select “BASS” or “TREBLE,” and then press +/.. repeatedly to adjust the level. Changing the display To Press Change DISPLAY . repeatedly information on when the system is on. the display1) Check the DISPLAY . when clock when the the system is off2). The system is off clock is displayed for 8 seconds. 1) For example, you can view CD/MP3 disc information or the USB device information, such as the track or file number or folder name during normal play, or the total playing time while the player is stopped. You can also view DAB station information such as the service name, channel label, preset number, frequency, DLS (Dynamic Label Segment), or ensemble label. 2) The STANDBY indicator . on the unit lights up when the system is off. Notes on the display information .Characters that cannot be displayed appear as “_”. .The following are not displayed: . total playing time for a CD-DA disc depending on the play mode. . total playing time and rem...