Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
To... Press ... Rewind the cassette (or ) button. Fast-forward the cassette ) button. (or 6 When you have finished playback, press button. REV. ModeCD SYNC. Display CD Repeat +10 TAPE PTY RDS TUNER Band Op Phones 1 4 Standby/On CD AUX Down Rec/Pause 5 Volume Tuning Mode REV.Mode 6 5 Up Sound Mode D You can record a radio program of your choice. You do not need to adjust the volume, as it has no effect on the recording. Switch the system on by pressing Standby/On ( ) . Insert a blank cassette in Deck. Select the TUNER function by pressing TUNER(Band). Select the radio station that you wish to record by pressing or button . Press REC/Pause. Result: REC is displayed in red and recording starts. To stop recording, press button. 1 2 3 4 5 6 The direct recording mode enables you to start recording with any track on the compact disc. You do not need to adjust the volume, as it has no effect on the recording. Switch your system on by pressing Standby/On ( ) . Insert a blank cassette in Deck. Load a compact disc. Press the CD( ) button. Use the CD selection ( , ) buttons to select the desired song. Press the REC/Pause button. Result: Recording will begin. To stop recording, press button. Standby/On Phones O CD TAPE AUX TUNER Volume Tuning Mode Down Up Rec/Pause REV.Mode Sound Mode Band 18 Recording a Radio Program Standby/On Phones O CD TAPE AUX TUNER Volume Tuning Mode Down Up Rec/Pause REV.Mode Sound Mode Band 4 1 4 5 6 3 You can record a compact disc on a cassette in two different ways: Synchronised recording Direct recording This feature enables you to synchronize the start of the recording with the start of the disc or track of your choice. Switch the system on by pressing Standby/On ( ) . Insert a blank cassette in Deck. Load a compact disc. Press the CD( ) button. Use the CD selection ( , ) buttons to select the desired song. Press the CD Synchro button on the remote control. When stopped, press the button to start the recording from the first piece of music. Press CD Synchro button on the remote control.during the playback of CD to start the recording from the first part of the music being played. To stop recording, press button. Synchronised recording 1234 5 6 1234 5 6 Direct recording Recording a Compact Disc 1 5 6 Standby/On Phones O CD TAPE AUX TUNER Volume Tuning Mode Down Up Rec/Pause REV.Mode Sound Mode Band 1 4 4 6 4 4 GB REV. CD SYNC. Mode Display CD Repeat +10 TAPE PTY RDS 5 Timer Function GB The timer enables you to switch the system on or off at specific times. 9 Press Stanby/On ( ) to set the system to standby mode. Result: is displayed to the bottom left of the time, indicating that Example: You wish to wake up to music every morning. the timer has been set. The system will switch on and off automatically at the required times. If you no longer want the system to be switched on or off automatically, you must cancel the timer. If the timer switch on and off times are identical, the word ERROR is displayed. Before setting the timer, check that the current time is correct. For each step, you have a few seconds to set the required options. If you exceed this time, you must start again. 1 Switch the system on by pressing Standby/On ( ) . 2 Press Timer/Clock until TIMER is displayed. 3 Press Program/Set. Result: ON TIME is displayed (instead of the equalizer symbols) for a few seconds, followed by any switch-on time already set; you can set the timer switch-on time. 4 Set the timer switch-on time. a Set the hour by pressing or button. b Press Program/Set. Result: The minutes flash. c Set the minutes by pressing or button. d Press Program/Set. Result: OFF TIME is displayed (instead of the equalizer symbols) for a few seconds, followed by any switch-off time already set; you can now set the timer switch-off time. 5 Set the timer switch-off time. a Set the hour by pressing or button. b Press Program/Set. Result: The minutes flash. c Set the minutes by pressing or button. d Press Program/Set. Result: VOL 10 is displayed, where 10 corresponds to the volume already set. 6 Press or button to adjust the volume level and press Program/Set. Result: The source to be selected is displayed. Press or button to select the source to be played when the 7 system switches on. If you select... You must also... TAPE (cassette) Insert a cassette tape. TUNER (radio) a Press Program/Set. b Select a preset station by pressing Tuning or . CD (compact disc) Load a compact disc. 8 Press Program/Set to confirm the timer. Timer On/Off EQ/P.Sound REV. ModeCD SYNC. Display CD Repeat Mono/ST Mute VOL. Band +10 Sleep TAPE Aux Timer/ Clock VOL. Tune/CD Mode Program/ Set PTY RDS 2 3,4,5,6,7,8 4,5,6,7 4,5,6,7 1,9 19 Mute FunctionCanceling the Timer Canceling the Timer GB After having set the timer, it will start automatically as shown by the TIMER indication on the display. If you no longer wish to use the timer, you must cancel it. You can stop the timer at any time (system on or in standby mode). To... Press Timer On/Off... Cancel the...