Оценок - 3, средний балл: 3
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
to may condense on the lens inside the CD player, and 65 W + 65 W (per channel at 8 ., 1 kHz, 10% THD) Design and specifications are subject to change without notice. tray. To play the same program again, select the CD NO DISC : There is no disc in the player, or you have avoid noise being recorded when you stop recording. .Place the speakers as symmetrically as possible. cause the system to malfunction. In this situation, High channel function, and press . (or CD . on the unit) .. loaded a disc that cannot be played. 65 W + 65 W (per channel at 8 ., 8 kHz, 10% THD) .Standby power consumption: 0.5 W .Connect only the supplied speakers. remove the disc, and leave the system turned on for .Halogenated flame retardants are not used in the NO STEP : All of the programed tracks have been erased. Other models: about an hour until the moisture evaporates. certain printed wiring boards. To cancel Program Play NOT USED : You pressed an invalid button. The following are measured at AC 120, 127, 220, 240 V, 50/60 Hz Severe hum or noise. .Halogenated flame retardants are not used in cabinets. Using the timers .Move the system away from sources of noise. OVER : You have reached the end of the disc while On heat buildup Low channel (Except for the United States and Canada models) Press PLAY MODE . repeatedly until “PGM” Power output (rated): disappears while the player is stopped. 50 W + 50 W (at 8 ., 1 kHz, 1% THD) pressing .. during playback or pause. .Heat buildup on the unit during operation is normal .Connect the system to a different wall socket. The system offers two timer functions. If you use both High channel PUSH SELECT : You tried to set the clock or timer during and is not cause for alarm. To delete the last track or file of the program .Install a noise filter (available separately) to the power cord. 50 W + 50 W (at 8 ., 8 kHz, 1% THD) timers, the Sleep Timer has priority. timer operation. RMS output power (reference): Press CLEAR . on the remote while the player is .Do not touch the cabinet if it has been used Low channel stopped. Sleep Timer: The remote does not function. PUSH STOP : You pressed PLAY MODE . during continuously at a high volume because the cabinet may 70 W + 70 W (per channel at 8 ., 1 kHz, 10% THD) playback. You can fall asleep to music. This function works even if .Remove any obstacles between the remote and the have become hot. High channel 70 W + 70 W (per channel at 8 ., 8 kHz, 10% THD) To view program information, such as total the clock is not set. remote sensor . on the unit, and position the unit READING : The system is reading information from the .Do not obstruct the ventilation holes. track number of the program Press SLEEP . on the remote repeatedly. If you select away from fluorescent lights. disc. Some buttons are not available. MHC-EC55 Press DISPLAY . repeatedly. “AUTO,” the system automatically turns off after the .Point the remote at the system’s sensor. SET CLOCK : You tried to select the timer when the clock On the speaker system North American model: RMS output power (reference): current disc or tape stops or in 100 minutes. .Move the remote closer to the system. 65 W+ 65 W (per channel at 6 ., 1 kHz, 10% THD) This speaker system is not magnetically shielded, and is not set. the picture on nearby TV sets may become magnetically If the tape deck is still playing or recording at the set SET TIMER : You tried to select the timer when the Play European and Russian models: distorted. In this situation, turn off the TV, wait 15 to 30 Power output (rated): 45 W + 45 W (at 6 ., 1 kHz, 1% THD) Presetting radio stations CD/MP3 player minutes, and turn it back on. RMS output power (reference): time, the system turns off after the tape deck stops. Timer is not set. TIME NG : The Play Timer start and end times are set to 65 W + 65 W (per channel at 6 ., 1 kHz, 10% THD) If there is no improvement, move the speakers far away You can preset your favorite radio stations and tune Play Timer: The sound skips, or the disc will not play. the same time. Other models: from the TV. them in instantly by selecting the corresponding preset You can wake up to CD or tuner at a preset time. .Wipe the disc clean, and replace it. The following are measured at AC 120, 127, 220, 240 V, 50/60 Hz Display examples Power output (rated): 45 W + 45 W (at 6 ., 1 kHz, 1% THD) number. Use buttons on the remote to control the Play Timer. .Move the system to a location away from vibration (for Cleaning the cabinet RMS output power (reference): 1 Tune in the desired station (See “Listening to the Make sure you have set the clock. example, on top of a stable stand). Display indicates Clean this system with a soft cloth slightly moistened 65 W + 65 W (per channel at 6 ., 1 kHz, 10% THD) radio”). .Move the speakers away from the system, or place them 2 (two) with a mild detergent solution. Do not use any type Inputs 1 Prepare the sound source. AUDIO IN (stereo mini jack): Sensitivity 800 mV, impedance 47 kilohms on ...
Эта инструкция также подходит к моделям:Музыкальные центры - MHC-EC55 (724.78 kb)
Музыкальные центры - MHC-EC77 (724.78 kb)