Оценок - 4, средний балл: 3.8
(
)
)
|
Фото и характеристики Sony MHC-EC50 |
Фрагмент инструкции
to select the CD function. 2 Press PLAY MODE . repeatedly until “PGM” appears while the player is stopped. 3 Press DISC SKIP . to select a disc. 4 Press ./. (or . . on the unit) . repeatedly until the desired track number appears. When programing MP3 files, press +/– . repeatedly to select the desired folder, and then select the desired file. Selected track or file number 5 Press ENTER . to add the track or file to the program. 6 Repeat steps 3 through 5 to program additional tracks or files, up to a total of 15 tracks or files. 7 To play your program of tracks or files, press . . (or CD/. . on the unit). The program remains available until you open the disc tray. To play it again, select the CD function, and press . . (or CD . . on the unit). To cancel Program Play, press PLAY MODE . repeatedly until “PGM” disappears while the player is stopped. To delete the last track or file of the program, press CLEAR . on the remote while the player is stopped. To view program information, such as total track number of the program, press DISPLAY . repeatedly. Presetting radio stations You can preset your favorite radio stations and tune them in instantly by selecting the corresponding preset number. Use buttons on the remote to preset stations. 1 Press TUNER/BAND . repeatedly to select “FM” or “AM.” 2 Press TUNING MODE . repeatedly until “AUTO” appears (or “MANUAL” appears, for a station with a weak signal). 3 Press +/– (or TUNING + or – on the unit) . to tune in the desired station. Scanning stops automatically when a station is tuned in, and then “TUNED” and “STEREO” (for stereo programs) appear. If “TUNED” does not appear and the scanning does not stop, press TUNING MODE . until “MANUAL” appears and press +/– (or TUNING + or – on the unit) . repeatedly to tune in the desired station. 4 Press TUNER MEMORY . on the remote. Preset number 5 Press +/– (or TUNING + or – on the unit) . repeatedly to select your desired preset number. If another station is already assigned to the selected preset number, the station is replaced by the new stations. 6 Press ENTER .. 7 Repeat steps 1 through 6 to store other stations. You can preset up to 20 FM and 10 AM stations. The preset stations are retained for about half a day even if you disconnect the power cord or if a power failure occurs. 8 To call up a preset radio station, press TUNING MODE . repeatedly until “PRESET” appears, and then press +/– (or TUNING + or – on the unit) repeatedly . to select the desired preset number. To change the AM tuning interval from the factory preset to 9 kHz (or 10 kHz, for some areas; this function is not available on the European and Saudi Arabian models), tune in any AM station, and then turn off the system. Press DISPLAY . to display the clock and while hold down TUNING + . on the unit, press ... . on the unit. All the AM preset stations are erased. To reset the interval to the factory preset, repeat the procedure. Recording onto a tape Use a TYPE I (normal) tape only. You can record just the portions you like from a sound source, including connected audio components. Use buttons on the unit to control tape recording. 1 Insert a recordable tape into the cassette holder with the side you want to record facing up. 2 Prepare the recording source. Select the desired source to record. Place the disc you want to record and press DISC SKIP . to select a disc. When recording a folder from an MP3 disc, press PLAY MODE . repeatedly to select “,” and then press +/– . repeatedly to select the desired folder. To record only your favorite CD tracks or MP3 files in your desired order, perform steps 2 to 5 of “Creating your own CD program.” 3 Start recording. Press . (record) ., and then start playing the desired recording source. The CD starts playing automatically. If there is noise while recording from the tuner, reposition the appropriate antenna to reduce the noise. While recording, you cannot listen to other sources. To stop recording, press .. .. Tip We recommend that you press . . first, and then press .. . to avoid noise being recorded when you stop recording. Using the timers The system offers two timer functions. If you use both timers, the Sleep Timer has priority. Sleep Timer: You can fall asleep to music. This function works even if the clock is not set. Press SLEEP . on the remote repeatedly. If you select “AUTO,” the system automatically turns off after the current disc or tape stops or in 100 minutes. If the tape deck is still playing or recording at the set time, the system turns off after the tape deck stops. Play Timer: You can wake up to CD or tuner at a preset time. Use buttons on the remote to control the Play Timer. Make sure you have set the clock. 1 Prepare the sound source. Prepare the sound source, and then press VOLUME +/– (or turn the VOLUME control on the unit) . to adjust the volume. To start from a specific CD track or MP3 file, create your own CD program. 2 Press CLOCK/TIMER SET .. 3 Press ./. . repeatedly to select “PLAY,” a...