Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
track. again. 5 Press PROG to store the track. . " DISC CHANGE" will be displayed. • Repeat steps 3to 5to store other discs . The CD will stop playing. and tracks. . The CD carousel tray will close to retrieve the inner CD and then open again with the inner CD accessible. 16 3139 116 19701 pg 01-29/C90/22-Eng 16 3/6/00, 1:53 PM CD CD Playing the program 1 Press PLAY.. to start program playback. . " PLAY PROGRAM" will be displayed. . The track number and elapsed playing time of the current track will appear on the display. • If you press REPEAT during program playback, the current track or all programmed tracks will be played repeatedly. . " TRACK" or " PROGRAM" will be displayed. . The REPEAT and PROGRAM appear on the display. 2 Press . to stop program playback. Notes: – If you press any of the CD DIRECT PLAY buttons, the system will play the selected disc or track and the stored program will be ignored temporarily. The PROGRAMdisplay also will disappear temporarily from the display. It will reappear when playback of the selected disc ends. – REPEAT DISC mode is not available when program playback begins. Erasing the program (when playback is stopped) • Press . . . " PROGRAM CLEARED" will be displayed. Note: – The program will be erased when the system is disconnected from the power supply or when the CD carousel tray is opened. Shuffle (only on remote control) In shuffle mode, the system plays all the available discs and their tracks in random order. Shuffle may be used also when tracks are programmed. To shuffle all the discs and tracks 1 Press SHUFFLE. . " SHUFFLE" will be displayed. . The SHUFFLE, the disc and the track selected at random appear on the display. • The discs and the tracks will be played in random order until you press . . • If you press REPEAT during shuffling, the current track or all available discs will be played repeatedly. . " TRACK" or " ALL DISC" will be displayed. . The REPEAT and SHUFFLE appear on the display. 2 Press SHUFFLE again to resume normal playback. . The SHUFFLE disappears from the display. Note: – REPEAT DISC mode is not available when shuffle is selected. Repeat (only on remote control) You can play the current track, a disc or all available discs repeatedly. 1 Press REPEAT on the remote control to select the various repeat modes. . " TRACK", " DISC", " ALL DISC" or " OFF" will be displayed. . The REPEAT appears on the display. • The selected track, selected disc or all available discs will now be played repeatedly until you press . . 2 Press REPEAT until the " OFF" mode is displayed to resume normal playback. . The REPEAT disappears from the display. Notes: – REPEAT DISC mode is not available during program play or shuffle mode. – You can also repeat shuffling a program. . “ TRACK“ or“ PROGRAM" will be displayed. . TheREPEAT, PROGRAMandSHUFFLE appear on the display. English 17 3139 116 19701 pg 01-29/C90/22-Eng 17 3/6/00, 1:53 PM TUNER Note: – For 'EASY SET' feature, please refer to page 11. Tuning to radio stations 1 Press TUNER (BAND) to select TUNER mode. . " TUNER" will be displayed. A few seconds later, the current radio frequency will be displayed. 2 Press TUNER (BAND) again to select the desired waveband : FM, MW or LW. 3 Press . or . for more than one second, then release. . The display will show " SEARCH" until a radio station with sufficient signal strength is found. 18 pg 01-29/C90/22-Eng 18 EnglishSTANDBY ON MINI HIFI SYSTEM STOP•CLEARSEARCH• TUNING PLAY PAUSE PREV NEXT DUB (HSD) RECORDA. REVDIMCLOCK/ TIMERPROG POWER SAVE IR SENSOR SIDE VOLUME RDS DOLBY B NR NEWS/TA CD TEXTBAND PRESET ss BASS/TREBLE TAPE CD TUNER AUX PERSONAL DSC VEC TAPE 1•2 CD 1•2•3 CDR/DVD BASS TREBLE DYNAMIC BASS BOOST • Repeat this procedure until the desired station is reached. • To tune to a weak station, briefly press . or . repeatedly until the display shows the desired frequency and/or when the best reception has been obtained. Storing Preset Stations You can store up to 40 radio stations in the memory. When a preset radio station is selected, the preset number appears next to the frequency on the display. Automatic programming 1 Press TUNER (BAND) . 2 Press PROG for more than one second. ™ The PROGRAM starts flashing and " AUTO" will be displayed. ™ The system will start searching for all radio stations with RDS and then followed by radio stations on FM, MW and LW band respectively. ™ All available stations will be stored automatically. The frequency and preset number will be displayed briefly. ™ The system will stop searching when all the available radio stations are stored or when the memory for 40 preset radio stations is used. ™ The system will remain tuned to the last stored preset radio station. Notes: – You can cancel the automatic programming by pressing PROG or . (on the system only). – If you want to reserve a section of preset numbers, for example preset numbers 1 to 9, select preset 10 before starting automatic programming, only the preset numbers 10 to 40 will be ...