Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
» The star t timer digits are displayed and begin to blink. 8 Press ALBUM +/- / to set the hour. 9 Press TITLE+/-/ to set the minute. 10 Press SLEEP/TIMER to confirm. » The end timer digits are displayed and begin to blink. 11 Press ALBUM +/- / to set the hour. 12 Press TITLE+/-/ to set the minute. English EN 19 13 Press SLEEP/TIMER to confirm. » is displayed. » At the scheduled times, the recording begins and ends automatically. » When the recording ends, the unit switches to standby mode. Tip • A recording is activated only in the standby mode. To deactivate or re-activate a record timer 1 In the standby mode, press SLEEP/TIMER repeatedly. »If the timer is activated, is displayed. » If the timer is deactivated, disappears. 10 Other features Set the alarm timer This unit can be used as an alarm clock.The disc, radio or USB is activated to play at a preset time. Note • If you have set a record timer and an alarm timer, only the latest timer is activated. 1 Ensure that you have set the clock correctly. (See “Get star ted - Set clock ”.) 2 Press to switch to standby mode. 3 Press and hold SLEEP/TIMER for more than 2 seconds. » A prompt to select the source is displayed. 4 Press CD 1/2/3, or TUNER or USB to select a source. 5 Press SLEEP/TIMER to confirm. » The clock digits are displayed and begin to blink. 6 Press ALBUM +/- / to set the hour. 7 Press TITLE+/-/ to set the minute. 8 Press SLEEP/TIMER to confirm. » The timer is set and activated. To deactivate or re-activate a alarm timer 1 In the standby mode, press SLEEP/TIMER repeatedly. »If the timer is activated, is displayed. » If the timer is deactivated, disappears. Tip • In MP3 link or AUX mode, the alarm timer cannot be set. • If the disc or USB source is selected but no audio file can be played, the radio is activated automatically. 20 EN Set the sleep timer This unit can switch to standby automatically after a set period of time. 1 When the unit is turned on, press SLEEP/ TIMER repeatedly to select a set period of time (in minutes). » When the sleep timer is activated, is displayed. To deactivate sleep timer1 Press SLEEP/TIMER repeatedly until [OFF] (off ) is displayed. »When the sleep timer is deactivated, disappears on the display. Listen to an external device You can listen to an external audio device through this unit. For audio players with headphone sockets1 Press MP3 LINK /AUX repeatedly to select the MP3 link source. 2 Connect the supplied MP3 link cable to: • the MP3 LINK jack (3.5mm) on the unit. • the headphone jack on an external device. 3 Star t to play the device (see the device user manual). For audio players with red/white audio output sockets 1 Press MP3 LINK /AUX repeatedly to select the AUX source. 2 Connect the audio cables (white/red jacks, not supplied) to: • the AUX IN jacks on the back of the unit. • the AUDIO OUT jacks on an ex ternal device. 3 Star t to play the device (see the device user manual). Delete files in the USB device 1 During USB play, press TITLE+/ / to select an audio file. • To delete an audio folder, in the stop position, press ALBUM +/- / to select an audio folder. 2 Press USB DELETE. » A confirmation message is displayed. 3 While the message is displayed, press USB DELETE again to confirm. • To cancel, press . » After you delete a file or an audio folder , the USB play stops. Karaoke You can connect a microphone and sing along with a music source. 1 Turn MIC VOL to the minimum level. 2 Connect a microphone to the MIC 1/2 jack of the unit. 3 Press CD 1/2/3, or TUNER, or USB, or MP3 LINK /AUX to select the source, and star t play. 4 Sing through the microphone. • To adjust the volume of the source, press VOL +/-. • To adjust the volume of the microphone, turn MIC VOL . • To adjust the echo level, turn KARAOKE ECHO VOL. Adjust display brightness 1 Press DIM repeatedly to select different levels of display brightness. Select button light display 1 Press LIGHT repeatedly on the main unit. » Each time you press LIGHT, the main unit buttons light up in a different way. EN 21 English 11 Product information Note • Product information is subject to change without prior notice. Specifications Amplifier Total output power 600W RMS Frequency response 60 - 16kHz Signal-to- noise ratio >67dB A (IEC) Aux input 500mV/700mV Disc Laser type Semiconductor Disc diameter 12cm/8cm CD-DA , CD-R , CD-RW, MP3-CD, Suppor t disc WMA-CD Audio DAC 24Bits / 44.1kHz Total harmonic distor tion <1.5% Frequency response 60Hz -16kHz (44.1kHz) S/N ratio >75dBA Tuner Tuning range FM: 87.5 - 108MHz; MW (AM): 531 1602kHz Number of presets 40 FM 75ohm wire MW (AM) Loop antenna 22 EN Speakers Speaker Impedance 3ohm Woofer 2 x 5.25” Tweeter 2 x 1.75” Dimensions (W x H x D) 225 x 430 x 275mm Weight 4.135kg each Subwoofer Speaker impedance 6ohm Speaker driver 8” Output power 180W Dimensions (W x H x D) 274 x 430 x 340mm Weight 6.250kg General information AC power 220 - 230V, 50Hz Operation power consumption 130W Eco Standby power consumption <1W USB d...