Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
2 Press 0 REC to star t recording. . The disc will star t playback automatically. To select another track during recording 1 Press PAUSE A (EA) to interrupt recording. 2 Pressi or e to select the desired track. 3 Press PLAYE (EA) to resume recording. External Sources To stop recording . Press C. . Recording and disc playback will stop simultaneously. Digital recording via Digital Out For CD digital recording, please refer to the instruction manuals for the CD recorder, digital audio equipment and so for th. VOL AUX/ CDR PROG PRESET TA P E SEARCH / TUNE TUNER DEMO STOPPAUSE PREV NEXT REC STOPPLAY NEWS CD 1•2•3 MICR O SY STEM Listening to external sources 1 Connect the audio out terminals of the external equipment (TV,VCR, Laser Disc player, DVD player or CD Recorder) to the AUX/CDR IN terminals of your system. 2 Press AUX/CDR repeatedly to select CDR mode or normal AUX mode. . "CDR" or "AUX" is displayed. . If the sound from the external source is distor ted, select CDR mode for listening. Notes: – You are advised not to listen to and record from the same source simultaneously. – All the interactive sound control features (IS or BASS/TREBLE, for example) are available for selection. – Refer to the operating instructions for the connected equipment for details. For Recording, please refer to “Tape Operation/Recording”. 24 3103 306 18501 pg 001-030/MC77/22-Eng 24 1/31/02, 7:57 PM Clock/Timer English --+- OPEN STANDBYON ECO POWER iR VOL AUX /CDR PROG PRESET TAPE SEARCH / TUNE TUNER DEMO STOPPAUSE PREV NEXT REC STOPPLAY BASS TREBLE NEWS -+ CD 1•2•3 MICR O SY STEM IMPORTANT! When in Eco Power standby mode, it is not possible to operate the clock or timer function. Clock setting The clock can be set in either 12-hour or 24-hour mode ("AM 12:00" or "00:00" for example) 1 Press and hold CLOCK on the remote control until the time flashing on the display. 2 Press PROG repeatedly to select clock mode. . "AM XX:XX" or "XX:XX" star ts flashing. 3 Press a or a repeatedly to set the hour. 4 Press i or e repeatedly to set the minute. 5 Press CLOCK again to store the setting. . The clock will star t working. To exit without storing the setting . Press Con the system. Notes: – The clock setting will be cancelled when the power cord is disconnected or if a power failure occurs. – During clock setting, if no button is pressed within 90 seconds, the system will exit clock setting mode automatically. – To set the clock automatically through the time information in the RDS signal, refer to "Radio Reception - Setting the RDS clock". Display clock The system allows you to select clock display or normal display in any source mode (except Eco Power standby mode). When in standby mode, the clock will automatically be displayed. . Press CLOCK on the remote control repeatedly to select clock display or normal display mode. . If the clock has not been set, "--:--" is displayed. Note: – If you pressed any buttons during clock display mode, the display will briefly show the information related to the selected mode. 25 3103 306 18501 pg 001-030/MC77/22-Eng 25 1/31/02, 7:57 PM Clock/Timer English Timer Setting The system can switch on to CD,TUNER, or TAPE mode automatically at a preset time, serving as an alarm to wake you up. IMPORTANT! – Before setting the timer, ensure that the clock is set correctly. – The timer will always be switched on after it has been set. – The timer will not start if a recording is in progress. – The volume of the timer will increase gradually from the minimum level to the last tuned volume level. 1 Press and hold TIMER on the remote control for more than two seconds. . "AM 12:00" or "00:00" or the last timer setting star ts flashing. . TIMER star ts flashing. . The selected source will be lighted while other available sources are flashing. 2 Press CD 1•2•3, TUNER or TAPE to select the desired source. . Before setting the timer, make sure the music source has been prepared. CD 1•2•3 – Load the disc(s).To star t from a specific track, make a programme (refer to “CD Operation - Programming the disc tracks”). TUNER – tune to the desired radio station. TAPE – load a prerecorded tape. 3 Press a or a repeatedly to set the hour for the timer to star t. 4 Press i or e repeatedly to set the minute for the timer to star t. 5 Press TIMER to store the start time. . "TIMER ON" is displayed, followed by the set timer "XX:XX" and the selected source. . TIMER remains on the display. . At the preset time, the selected sound source will play. To exit without storing the setting . Press Con the system. Notes: – If CD is the selected source and it is not available when the preset time is reached,Tuner will be selected automatically. – During timer setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically. Checking the timer . Press TIMER on the remote control. . If the timer has been activated, the set timer information is displayed. Activating/deactivating the timer . Press TIMER ON/OFF...