Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Tip . If no DAB+ service is available, [NO DAB STATION] is displayed, and then [Station list] is displayed. Scan DAB+ radio stations automatically You can per form full scan to search for DAB+ radio stations. 1 In DAB+ mode, press MODE/SCAN. » The unit scans all available DAB+ ............................................................................ available station. Tune to DAB+ radio station manually 1 Press DAB/TUNER repeatedly to select [DAB+]. 2 Press / to select [Manual Tune]. 3 Press ENTER.................... 4 Press / to navigate DAB+ radio stations. 5 Press ENTER...................... Program DAB+ radio stations manually You can program a maximum of 30 preset DAB+ radio stations. 1 Tune to a DAB+ radio station. 2 Press PRESET +/- to select a preset number. 3 Press and hold PROG/CLOCK SETfor two seconds. » The preset number of the saved station appears. Listen to a preset DAB+ radio station 1 Press SOURCErepeatedly to select [DAB+]. 2 Press PRESET +/- to select a preset number. 3 Press ENTER...................... Show DAB+ information 1 Tune to a DAB+ radio station. 2 Press repeatedly to scroll through the following information (if available): » Dynamic label segment (DLS) » Program type (PTY) » Ensemble Name » Time » Channel and frequency » Bit rate and audio status » Signal error rate Use DAB+ menu 1 In the DAB+ mode, press MENU to enter the DAB+ menu. 14 EN 2 Press / to scroll the menu options: .. [Station list] .. [Full scan] .. [Manual tune] .. [DRC] (dynamic range control) .. [Prune] .. [System] 3 To select an option, press ENTER. 4 Repeat step 2-3 if sub-option is available under one option. Full scan Full scan is used to per form a wide range of DAB+ radio search. 1 In the DAB+ mode, press MENU to enter the menu options. 2 Press / repeatedly until [Full scan] is displayed. 3 Press ENTER................................................ » Full scan star ts automatically. Manual tune ........................................................................................ channel/frequency manually. In addition to antenna orientation for better radio reception, the optimal reception can also be obtained with this feature. 1 In the DAB+ mode, press MENU to display the “Manual tune” option. 2 Press ENTER................................................ » The display shows a channel and its frequency. 3 Press / repeatedly until the desired channel/frequency appears. 4 Press ENTER................................................ Tip . You may press DISPLAY to change the ser vice information on the display. . You may adjust the position of the antenna to obtain the optimal signal strength. .. Press MENU to exit manual tune function. DRC Dynamic range control (DRC) adds or removes a degree of compensation for the differences in the dynamic range between radio stations. .. [DRC off] (DRC is switched off.) .. [DRC high] (DRC is switched on; the default setting recommended for noisy environment.) .. [DRC low] (DRC is set to half normal level) Prune With this feature, you can clear all the invalid stations from the station list. 1 In the DAB+ mode, press MENU to enter the menu options. 2 Press / repeatedly until [Prune] is displayed. 3 Press ENTER................................................ » [Y] or [N] is displayed. 4 Press / to switch between [Y] and [N]. 5 Press ENTER.................... System With this feature, you can: .. know the software version of the unit 1 In the DAB+ mode, press MENU to enter the menu options. 2 Press / repeatedly until [System] is displayed. 3 Press ENTER.................... » [SW version] is displayed. 4 Press ENTER again. » The software version of the main unit is displayed. .. reset DAB/FM stations 1 In the DAB+ mode, press MENU to enter the menu options. 2 Press / repeatedly until [System] is displayed. 3 Press ENTER...................... » [SW version] is displayed. EN 15 English 4 Press / to switch to [Tuner Reset]. 5 Press ENTER...................... 6 Press / to switch between [Y] and [N]. .. [Y]: reset all DAB/FM radio stations. .. [N]: preset radio stations remain unchanged. 7 Press ENTER.................... Listen to FM radio Tune to a radio station 1 Press TUNER to select FM. 2 Press / .......................................... frequency. » Play star ts automatically. Tip . You can press MODE/SCAN to tune to the next station with strong reception automatically. Program radio stations automatically You can program a maximum of 30 preset radio stations (FM). 1 In the tuner mode, press and hold MODE/SCAN to activate automatic program mode. » All available stations are programmed in the order of waveband reception strength. » ........................................................................ broadcast automatically. Program radio stations manually You can program a maximum of 30 preset radio stations (FM). 1 Tune to a radio station. 2 Press PROG/CLOCK SET to activate program mode. 3 Press / to allocate a number to this radio station, then press and hold PRO...