Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
1 Tune to a radio station. 2 Press PROG to activate programming mode. 3 Press ALB/PRESET+/- to select a number from 1 to 20 for this radio station, then press PROG to confirm. » The preset number and the frequency of the preset station are displayed. 4 Repeat steps 2-3 to program other stations. Note • To overwrite a programmed station, store another station in its place. Show RDS information RDS (Radio Data System) is a ser vice that allows FM stations to show additional information. If you tune to an RDS station, an RDS icon and the station name are displayed. 1 Tune to an RDS station. 2 Press RDS repeatedly to scroll through the following information (if available): » Station name » Program type such as [NEWS] (news), [SPORT] (spor t), [POP M] (pop music)... » Radio text » Frequency Synchronize clock with RDS You can synchronize time shown on the unit with that on the RDS station. 1 Tune to a RDS radio station that transmits time signals. 2 Press RDS for over 2 seconds. » [CT SYNC] is displayed and the unit reads RDS time automatically. » If no time signal is received, [NO CT] is displayed. Note • The accuracy of the transmitted time depends on the RDS station that transmits the time signal. Other features Set alarm timer This unit can be used as an alarm clock.You can select DISC, USB, or FM TUNER as alarm source. Note • Make sure that you have set the time correctly. 1 In standby mode, press and hold TIMER until [TIMER SET](timer set) scrolls on the display. » [SELECT SOURCE] (select source) scrolls on the screen. 2 Press SOURCE repeatedly to select a source: DISC, USB, or FM TUNER. 3 Press TIMER to confirm. » The hour digits are displayed and begin to blink. 4 Press / repeatedly to set hour, then press TIMER again to confirm. » The minute digits are displayed and begin to blink. 5 Press / to set minute, then press TIMER to confirm. » is displayed. Activate/deactivate alarm timer In standby mode, press TIMER repeatedly to activate or deactivate timer. » If timer is activated, is displayed. Note • Alarm timer is not available in MP3 LINK mode. • If DISC/USB source is selected, yet no disc is placed or no USB is connected, the system switches to the tuner source automatically. Set sleep timer When the unit is turned on, press SLEEP repeatedly to select a time period (in minutes). » When sleep timer is activated, is displayed. » To deactivate sleep timer, press SLEEP again until disappears. Listen to external audio device You can listen to an external audio device such as MP3 player through this unit. 1 Connect the audio device. • For audio device with headphone sockets: Connect MP3 Link cable to the MP3-LINK socket and to the headphone socket on the audio device. 2 Select MP3-LINK source. 3 Play the device. Listen through headphone Plug a headphone into the socket on the unit. Product information Note • Product information is subject to change without prior notice. Specifications Amplifier Rated Output Power 2X5W RMS Frequency Response 60 - 16 kHz, ±3dB Signal to Noise Ratio >65 dB Aux Input 0.5 V RMS 20kohm Disc Laser Type Semiconductor Disc Diameter 12cm/8cm Suppor t Disc CD-DA, CD-R, CD-RW, MP3-CD Audio DAC 24Bits / 44.1 kHz Total Harmonic Distor tion <1% Frequency Response 60 Hz -16 kHz (44.1 kHz) S/N Ratio >65dBA Tuner Tuning Range FM: 87.5 - 108 MHz Tuning Grid 50 KHz Sensitivity< 22 dBf - Mono, 26 dB S/N Ratio Search selectivity < 36 dBu Total harmonic distor tion < 3 % Signal to noise ratio > 45 dB Speakers Speaker Impedance 4 ohm Speaker Driver 3.5" Sensitivity >82dB/m/W General information AC power 100-240 V, 50/60 Hz Operation Power Consumption 10 W Standby Power Consumption < 1 W Dimensions -Main Unit (W x H x D)150 x 227 x 208.5 mm - Speaker Box (W x H x D) 140 x 227 x 158.6 mm Weight -Main Unit1.265 kg - Speaker Box 2 x 1.063 kg USB playability information Compatible USB storage devices: • USB flash memory (USB 2.0 or USB1.1) • USB flash players (USB 2.0 or USB1.1) • memor y cards (requires an additional card reader to work with this apparatus) Supported formats: • USB or memor y file format FAT12, FAT16, FAT32 (sector size: 512 bytes) • MP3 bitrate (data rate): 32-320 Kbps and variable bitrate • Director y nesting up to a maximum of 8 levels • Number of albums/ folders: maximum 99 • Number of tracks/titles: maximum 999 • ID3 tag v2.0 or later • File name in Unicode UTF8 (maximum length: 32 bytes) Unsupported formats: • Empty albums: an empty album is an album that does not contain MP3/WMA files. • Unsuppor ted file formats are skipped. For example, Word documents (.doc) or MP3 files with extension .dlf are ignored and not played. • AAC, WAV, PCM audio files • DRM protected WMA files (*.wav, *.m4a, *.m4p, *.mp4, *.aac) • WMA files Supported MP3 disc formats • ISO9660, Joliet • Maximum title number : 512 (depending on file name length) • Maximum album number : 255 • Suppor ted sampling frequencies: 32 kHz, 44.1kHz, 48 kHz • Suppor ted Bit-rates: 32~256 (kbps), variable bit rates Troubleshoot...