Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
2) Press and hold RDS/DISPLAY until [CT SYNC] is displayed. Use the menu When you listen to radio, you can access the menu for control options. 1 Press MENU/ . »»FM mode: [SCAN SETTINGS] (scan setting) is displayed. »»DAB mode: [STATION] (station) is displayed. 2 Press / to select a menu option, and then press OK or to confirm the option or enter the lower-level menu. FM mode: [SCAN SETTINGS] (scan setting) Search and store radio stations automatically: [STRONG] (strong) for radio stations with strong signal only, [ALL] (all) for all radio stations. [AUDIO] (audio) Select a sound mode: [STEREO] (stero) or [MONO] (mono). [SYSTEM] (system) [RESET] (reset): Reset all radio settings to the factory default status. [SW VER] (software version): Display the current version of the firmware. [UPGRADE] (upgrade): Upgrade the firmware. DAB mode: [STATION] (station) Access the list of the previously stored DAB radio stations. • Press / to select a station, and then to start listening. [FULL SCAN] (full scan) Scan and store DAB radio stations within full range. [MANUAL] (manual) Tune to a DAB radio station manually. [DRC] (DRC) Dynamic range control: Select a level for the effect of dynamic range control. EN [SYSTEM] (system) [RESET] (reset): Reset all radio settings to the factory default status. [SW VER] (software version): Display the version of the current firmware. [UPGRADE] (upgrade): Upgrade the firmware. 3 Press MENU/ to exit the menu. 8 Other features Set sleep timer In working mode, press SLEEP/TIMER repeatedly to select a set period (in minutes). »»When sleep timer is activated, is displayed. • To deactivate sleep timer, press SLEEP/TIMER again until disappears. Set alarm timer This product can be used as an alarm clock. You can select CD, iPod/iPhone/iPad library, PHILIPS playlist, FM/DAB, or USB as alarm source. Note ••Make sure that you have set the clock correctly. 1 In standby mode, press and hold SLEEP/TIMER until[TIMER SET] (set timer) scrolls on the display. »»[SELECT SOURCE] (select source) scrolls on the screen. 2 Press VOL +/-, SOURCE, or PRESET/ ALBUM+/- repeatedly to select a source: CD, USB, FM, DAB, iPod/iPhone/iPad library, or PHILIPS playlist. 3 Press SLEEP/TIMER to confirm. »»The hour digits are displayed and begin to blink. 4 Press / or VOL +/- repeatedly to set hour, and then press SLEEP/TIMER. »»The minute digits are displayed and begin to blink. EN 5 Press / or VOL +/- to set minute, and then press SLEEP/TIMER again. »»[VOL] (volume) is displayed and begins to blink. 6 Press / or VOL +/- to adjust volume, and then press SLEEP/TIMER to confirm. »» is displayed. • To deactivate/activate the alarm timer, press SLEEP/TIMER repeatedly in normal standby mode. Note ••When the alarm sounds, you can press VOL +/- to adjust volume. ••The alarm timer is not available in MP3 LINK mode. ••To use iPod/iPhone/iPad playlist as the alarm source, create a playlist named “PHILIPS” in your iPod/iPhone/ iPad first. ••If no playlist named “PHILIPS” exists in the iPod/iPhone/ iPad or the playlist includes no playable track, this product switches the alarm source to iPod/iPhone/ iPad library. ••If other alarm sources are unavailable, this product switches to FM mode automatically. Listen to external audio device You can listen to an external audio device, for example, MP3 player through this product. 1 Press MP3 LINK/USB repeatedly to select MP3 link source. 2 Connect the MP3 Link cable to • the MP3-LINK socket in the front panel of the main unit • the headphone socket on the external device. 3 Start to play the external device. (See the device user manual). Listen through headphone Plug a headphone into the socket in the front panel of the main unit. Note ••No audio output from the headphone socket when you listen to the docked iPod/iPhone/iPad. Listen through the speakers instead. EN 9 Upgrade the firmware Note ••Power supply must not be interrupted during the upgrade. ••The firmware upgrade can only be available through the mini-USB port on the back plate. ••When the firmware upgrade succeeds, all settings are restored to the factory default status. Register your product 1 Go to 2 Click the link of "Register my product" (the exact wording of this link name may vary in different languages). 3 Login with your account on the prompt Web page. • If you have no account for Club Philips, create one first on this Web page. 4 Search your product with "DCB2020/12" as the keywords. 5 Click the link of search result to access the Web page for registering your product. 6 Fill in necessary information about this product to complete the registration. »»With the registration, you can get information about software update and product support at this website or via your mailbox that is registered as the account for Club Philips. Check the current firmware version Follow the steps to check the current version of firmware on your product. 1 Press DAB/FM to switch to radio mode. 2 Press MENU/ to access th...