Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
2 Press / repeatedly to select an hour format. 3 Press CLOCK SET to confirm. » The hour digits blink. 4 Repeat steps 2-3 to set the hour. 5 Repeat steps 2-3 to set the minute. 6 Repeat steps 2-3 to select whether to synchronize time with RDS stations. • [RDS TIME SYNC [Y]]: synchronize time with RDS stations automatically. • [RDS TIME SYNC [N]]: deactivate time synchronization. Note • The accuracy of the transmitted time depends on the RDS station that transmits the time signal. • If the system is idle for 90 seconds, it exits clock setting mode automatically. Store FM radio stations automatically When you connect AC power and no FM stations are stored, the system prompts you to search and store all the available FM stations. 1 Connect the system to the power supply. » [AUTO INSTALL - PRESS PLAY, STOP CANCEL] (to auto install, press ; to cancel, press ) is displayed. 9 EN 2 Press and hold for 3 seconds to star t full scan. » The system automatically stores FM radio stations with sufficient signal strength. » The first preset station is broadcast automatically. Tip • To exit storing mode, press or . 4 Play Play disc 1 Press to open the disc tray. 2 Inser t a disc with the printed side facing up. 3 Press to close the disc tray. 4 Press CD on the remote control to select the disc source. » [Reading] (reading) blinks for a moment, then CD star ts playing automatically. If not, press . Play from a USB storage device Note • Make sure that the USB device contains playable audio content. EN 10 1 Inser t the USB storage device into the socket. 2 Press USB on the remote control to select the USB source. » Play star ts automatically. If not, press . Play from Bluetooth-enabled devices Note • The effective operating range between the system and the paired device is approximately 10 meters (30 feet). • Any obstacle between the system and the device can reduce the operational range. • Compatibility with all Bluetooth devices is not guaranteed. 1 Press to select Bluetooth source. » [BT] is displayed. » The Bluetooth indicator flashes blue. 2 On your Bluetooth device, enable Bluetooth and search for Bluetooth devices that can be paired (refer to the user manual of the device). 3 When [BTM2056] is displayed on your device, select it to star t pairing and connection. » After successful pairing and connection, the Bluetooth indicator turns solid blue, and the system beeps twice. 4 Play audio on your device. » Audio streams from your device to this micro system. Tip • The system can memorize up to 5 previously connected Bluetooth devices. To disconnect the Bluetooth-enabled device: • Deactivate Bluetooth on your device; or • Move the device beyond the communication range. To clear Bluetooth pairing history: Pressand hold for 3 seconds. » The current Bluetooth connection is disconnected. » After successful clearing, [CLEAR] (clear) is displayed for 3 seconds. Play options Control play In CD or USB mode: / Select an audio file; Press and hold to fast forward or fast reverse the track during playback, then release to resume play. / For MP3/WMA tracks, select an album or folder. Star t or pause play. Stop play. OK Confirm a selection. Numeric buttons Select a track directly. 11 EN REPEAT/SHUFFLE [ ]: Play the current track repeatedly. [ ] (for MP3/ WMA only): play all tracks in this album repeatedly. [ ]: play all tracks repeatedly. [ ]: play all tracks randomly. To return to normal play, press REPEAT/SHUFFLE repeatedly until the repeat or shuffle icons disappear. Program tracks You can program a maximum of 20 tracks. 1 In CD or USB mode, press to stop playback. 2 Press PROG to activate the programming mode. » [PROG] (program) is displayed. 3 For MP3/WMA tracks, press / repeatedly to select an album. 4 Press / repeatedly to select a track, then press PROG to confirm. 5 Repeat steps 3-4 to program more tracks. 6 To play the programmed tracks, press . » During play, [PROG] (program) is displayed. • To erase the program, press twice. Adjust sound During play, you can adjust volume and select different sound effects. Key Function VOL +/-Increase or decrease volume. Mute or resume sound. DBB Turn dynamic bass enhancement on or off. DSC Select a sound effect: [POP] (pop) [JAZZ] (jazz) [ROCK] (rock) [CLASSIC] (classic) [FLAT] (flat) Display different information During play, press DISPLAY repeatedly to view time and different play information. EN 12 5 Listen to FM radio Tune to FM radio stations Note • Position the antenna as far as possible from TV,VCR, or other radiation source. • Make sure that you have connected and fully extended the supplied FM antenna. 1 Press FM to select FM tuner mode. 2 Press and hold / for 3 seconds. » [SEARCH] (search) is displayed. » The system tunes to an FM station with strong reception automatically. 3 Repeat step 2 to tune to more stations. To tune to a station with weak signal: Press / repeatedly until you find good reception. Program FM radio stations automatically Note • You can program a maximum of 2...