Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
• Option 2: Connect through component video cables (for a Progressive Scan TV). Option 1: Connect through a composite video cable VIDEOR L 1 Connect the composite video cable to: • the VIDEO socket on this product. • the video input socket on the T V. 2 Connect the audio cables to: • the L and R sockets on this product. • the audio input sockets grouped with the video input socket that is mentioned in step 1. Option 2: Connect through component video cables LR Pr/Cr Y Pb/Cb Connect a progressive scan TV through component video cables for higher quality video. 1 Connect the component video cables to: • the Y Pb/Cb Pr/Cr sockets on this product. • the component input sockets on the T V. 2 Connect the audio cables to: • the L and R sockets on this product. • the audio input sockets grouped with the component input socket that is mentioned in step 1. Connect a USB storage device Note • For the best data transmission, use the supplied USB cable only. 1 Connect the supplied USB cable to: • the jack on this product. • the plug of your USB storage device. Connect power Note • Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. • Risk of product damage! Make sure that the power supply voltage corresponds to the voltage printed on the back of the main unit. • Before you connect the AC power cord, make sure that you have complete all other connections. • Protect the power cord from being walked on or pinched, par ticularly at plugs, conveniencereceptacles, and the points where they exit from the apparatus. • Unplug this apparatus during lightning storms or when unused for long periods of time. English EN 11 5 Get started 1Connect the AC power cord to • the AC MAINS socket on this product. • the power supply. Turn on 1 Press . » The unit switches to the last selected source. Switch to standby mode If no source is played within 15 minutes, the product switches to standby mode. If no operation is per formed within 15 minutes in standby mode, the product switches to Eco-power standby mode. To manually switch the product to standby mode, press . Set the clock The unit uses the 24-hour time format. 1 In standby mode, press and hold DISPLAY/CLOCK for 2 seconds. » The hour digits blinks. 2 Press / to set the hour. 3 Press DISPLAY/CLOCK. » The minute digits blinks. 4 Press / to set the minute. 5 Press DISPLAY/CLOCK. 12 EN Find the correct viewing channel 1 Press to turn on the unit. 2 Press DISC to switch to disc mode. 3 Turn on the T V and switch to the correct video-in channel in one of the following ways: • Go to the lowest channel on your TV, then press the Channel Down button until you see the blue screen. • Press the source button repeatedly on the remote control of your TV. Tip • The video-in channel is between the lowest and highest channels and may be called FRONT, A/V IN, VIDEO etc. See the TV user manual on how to select the correct input on the T V. Select the correct TV system This product is compatible with both NTSC and PAL. If the picture is abnormally displayed with the default setting, select a TV system that matches your TV. See “Setup” > “System setup” > [TV SYSTEM] for details. Select a language for onscreen- display messages English, Por tuguese and Spanish are optional for this setting. See “Setup” > “Language setup” > [OSD LANGUAGE] for details. 6 Play Caution • Risk of damage to the unit! During play, never move the unit. • Never put any objects other than discs into the disc compar tment. • Never look at the laser beam inside the unit. • Never play discs with accessories such as disc stabilizer rings or disc treatment sheets. When [INVALID KEY] is displayed after an operation, it indicates that this operation is unavailable for the current media or at the current time. Basic operation The listed operations are applicable for all suppor ted media. Function Action Stop play Press . Pause or resume play Press . Skip to the previous/next Press / . title, chapter, track, or file Play a disc 1 Press DISC to select the disc source. 2 Press to open the disc compar tment. 3 Place a disc onto the tray with the printed side upward, and then press . 4 Play star ts automatically. • To star t play manually, press . • To play a DVD that you set a rating level, enter the 4-digit parental control password first (Refer to “Setup” > “System setup” > [PASSWORD] and [R ATING]). EN 13 English Play recored files You can play DivX/MP3/WMA/JPEG picture files copied onto a CD-R/RW, recordable DVD or USB storage device. Note • You can only play DivX videos rented or purchased through the DivX registration code of this unit. • Subtitle files with the following filename extensions (.sr t, .smi, .sub, .ssa, .ass) are suppor ted but do not appear on the file navigation menu. • The subtitle filename has to be the same as the file name of the video. 1 Select a source. • For a USB storage device, press USB. • For a disc, press DISC. 2 Inser t the USB stora...