Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Please use this kind of installation only if you are experienced in setting up networks with additional options: – Integration of MC W770 into an existing network – Add an additional audio system – Add an additional PC server Manual installation of the driver for the wireless USB adapter, the Philips Media Manager software and the network setup These 3 installation steps perform the same functionality and have the same behaviour as the quick installation (see “Quick installation”) in a single piece, except for the following additional window, which will appear during the network setup: . Do not select Do not perform automatic setup for this type of installation as this is necessar y only to integrate the MC W770 into an existing network as described later. Just click on Next to proceed. Wireless PC link Custom Installation Installation of an additional audio system or recovery if audio system PC link settings are lost If you want to add an additional MC W770 or an equivalent audio system into your existing MC W770 network, you can connect them to the same PC ser ver without changing the settings of the current PC link installation.This procedure can also be used when the PC link settings have been lost on the audio set. 1 Select Add additional Audio System in the Custom Installation menu and click on Install. 2 . The PC checks the PC link configuration and the following window appears: Click on Next to continue. 3 . After some time the following window will appear : English Custom Installation Wireless PC link English 4 Press PC LINK Aon the additional audio system for at least 5 seconds until INSTALLING is scrolled on the set. . The set searches for a connection to the PC. This can require up to about a minute. When the connection is established, Next is activated. Note: If the additional audio system is not an MC W770, please look at the user manual of the device on how to enter the installation mode. Click on Next. 5 . The installation steps will be executed automatically by the PC. Afterwards PC LINK and COMPLETED are displayed on the set and the following window will appear : Click on Exit and the installation is finished. Installation of an additional PC server or recovery of PC link settings on your PC If you want to use your MC W770(s) together with more than one PC, you have to install the Philips Media Manager Software and the PC link setting on your PC. A wireless USB adapter is required. If you want to use a different network adapter as bypacked with the MC W770 proceed according to chapter “Using a different wireless network adapter” (Please note that a proper function cannot be guaranteed by using a different network adapter).This procedure can also be used when your PC link settings on your PC are lost or destroyed. If you use the bypacked wireless USB adapter proceed as follows: 1 Enter the Custom installation menu on PC side, select Add New PC server and click on Install. . You will be asked if you want to install the driver for the wireless USB adapter. 2 If the driver is not installed and you want to use it: Click on Yes. . The drivers will be installed and the PC has to be rebooted. If the wireless USB adapter is already installed: Click on No. Wireless PC link Custom Installation 3 If you have clicked on No or the driver installation is finished, the Philips Media Manager Software will be installed.Then the PC is rebooted and PC configurations are checked. Finally the following window will appear : English 4 Press PC LINK Aon the audio system for at least 5 seconds until INSTALLING is scrolled on the set. . The set searches for a connection to the PC. This can require up to about a minute. When the connection is established, Next is activated. Click on Next. 5 . The following window will appear : Click on Exit and the installation is finished. Custom Installation Wireless PC link English Integration of MC W770 into an existing (home) network You can also install the MC W770 in any other, perhaps existing network, which is compliant to the Wi-Fi or IEEE802.11b,g rules. Please use this kind of installation only if you are experienced in handling wireless networks and experienced in setting up these networks! In general there are 2 types of network modes: ad-hoc mode (used for direct connections to PC’s) and infrastructure mode (used when you have accesspoint(s) in your network). Both modes are suppor ted. Before starting this installation process: – There should be a PC in the network having the dedicated Philips Media Manager Software installed.Therefore install the Philips Media Manager software from the installation CD only. – The wireless USB adapter has to be already installed and connected on the PC you use for installation. –You should have the wireless settings for your network like SSID and WEP keys available. 1 Inser t the installation disc.The installation guide will appear automatically. If it does not, star t the installation manually by running setup_.exe from the installati...
Эта инструкция также подходит к моделям:Музыкальные центры - MCW770/22B (1.09 mb)